EN 1069-2:2010
(Main)Water slides - Part 2: Instructions
Water slides - Part 2: Instructions
This European Standard is applicable to water slides as defined in EN 1069 1:2010, 3.3.
This European Standard establishes the instructions for use, operation and maintenance as well as the documentation and commissioning of water slides.
Wasserrutschen - Teil 2: Hinweise
Diese Norm gilt für alle nach EN 1069 1:2010, 3.3 festgelegten Wasserrutschen.
Diese Norm legt Anweisungen für die Benutzung, den Betrieb und die Wartung von Wasserrutschen fest sowie deren Dokumentation und Abnahmeprüfung.
Toboggans aquatiques - Partie 2: Instructions
La présente Norme européenne s'applique aux toboggans aquatiques tels que définis dans l'EN 1069 1:2010, 3.3.
La présente Norme européenne spécifie les instructions d'utilisation, d'exploitation et d'entretien, ainsi que les documents et la réception des toboggans aquatiques.
Vodni tobogani - 2. del: Navodila
Ta evropski standard velja za vodne tobogane, kot je opredeljeno v EN 1069-1:2010, 3.3. Ta evropski standard vzpostavlja navodila za uporabo, obratovanje in vzdrževanje ter za dokumentacijo in začetek obratovanja vodnih toboganov.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vodni tobogani - 2. del: NavodilaWasserutschen - Teil 2: HinweiseWater slides - Part 2: Instructions97.220.40Oprema za športe na prostem in vodne športeOutdoor and water sports equipmentICS:Ta slovenski standard je istoveten z:EN 1069-2:2010SIST EN 1069-2:2010en,fr,de01-december-2010SIST EN 1069-2:2010SLOVENSKI
STANDARDSIST EN 1069-2:20021DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1069-2
August 2010 ICS 97.220.40 Supersedes EN 1069-2:1999English Version
Water slides - Part 2: Instructions
Toboggans aquatiques - Partie 2: Instructions
Wasserutschen - Teil 2: Hinweise This European Standard was approved by CEN on 16 July 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1069-2:2010: ESIST EN 1069-2:2010
Safety and information signs for water slides . 15Annex B (informative)
Example of the risk assessment . 24Bibliography . 40 SIST EN 1069-2:2010
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
EN 15288-2:2008, Swimming pools — Part 2: Safety requirements for operation EN ISO 3834 (all parts), Quality requirements for fusion welding of metallic materials (ISO 3834:2005) EN ISO 13849-1, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design (ISO 13849-1:2006) EN ISO 15607, Specification and qualification of welding procedures for metallic materials — General rules
(ISO 15607:2003) ISO 3864-1, Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs in workplaces and public areas ISO 3864-3, Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs ISO 7001, Graphical symbols — Public information symbols ISO 7010:2003, Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas ISO 20712-1, Water safety signs and beach safety flags — Part 1: Specifications for water safety signs used in workplaces and public areas ISO 20712-3:2008, Water safety signs and beach safety flags — Part 3: Guidance for use ISO 22727, Graphical symbols — Creation and design of public information symbols — Requirements 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1069-1:2010 and the following apply. 3.1 operator company, organization, authority or person with overall control and responsibility for the water slide facility
4.2 Guidelines to the operational risk assessment An operational risk assessment shall be performed by the slide operator, based on the results of the design risk assessment, as a basis for the identification of the proper supervision, following the requirements of EN 15288-2. In addition, and referring to the fact that impact between the users proved to be a critical issue, also the following risks shall be taken into consideration: a) inappropriate spacing at the start between users; b) sliding position (e.g. sitting) can bring the user to an involuntary stop; c) significant differences in speed can cause collisions of users; d) significant differences in speed caused by: 1) different sliding positions; 2) different bathing costume respectively wearing hardly any bathing costume (e.g. G-string type); 3) different fitness, size, weight and age of user; 4) changing water flow rate (malfunction of water supply); e) reasonably foreseeable risky behaviours by the users: 1) higher risk of collision between users at a splashdown area in contrast to a catch unit; f) suitability for children; g) foreseeable users categories (e.g. adults, children, both) and number of users (e.g. chain sliding allowed); h) allowed use of ride enhancement devices (e.g. mattresses, rafts). Examples of general and specific risk assessments are given in Annex B.
4.3 Risk reduction The operator shall take measures to reduce possible risks to a minimum bearing in mind the risky behaviours of users by choosing an appropriate level of distance control and supervision and shall identify a risk reduction strategy from the following options: SIST EN 1069-2:2010
c) a proper level of supervision/technical measures as a result of the risk assessment. Additional safety equipments which may be used: d) For the user: The installation of a monitor at the start section that transmits the situation at the end of the slide and at the catch unit/splashdown area for the person who is starting to see whether the catch unit or the splashdown area of the pool is free. e) For the supervisory staff: The installation of a monitor at the staff terminal that transmits the situation at the start and the end of the slide and at the catch unit/splashdown area. The quality of technical distance control equipment depends on the risk assessment and should be carried out in accordance with EN ISO 13849-2. 4.4 Basic elements for the identification of proper supervision
The operator, by performing the part of the risk assessment concerning proper supervision, shall take into account at least the following: a) kind of landing: 1) catch unit; 2) sofa unit; 3) special pool and its water depth at landing; 4) general purpose pool and its water depth at landing; b) speed at the final part; c) presence and kind of distance control: 1) full technical distance control; 2) traffic lights; 3) other types; d) visibility for the user: 1) slide fully visible from the start; 2) catch unit visible from the start; 3) pool visible from the start. The use of mandatory and prohibition signs and public information symbols should also be considered when determining the proper supervision to enforce them.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.