EN 4800-007:2010
(Main)Aerospace series - Titanium and titanium alloys - Technical specification - Part 007: Remelting stock
Aerospace series - Titanium and titanium alloys - Technical specification - Part 007: Remelting stock
This standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of titanium and titanium alloy remelting stock. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.
Luft- und Raumfahrt - Titan und Titanlegierungen - Technische Lieferbedingungen - Teil 007: Vormaterial
Diese Norm legt die Anforderungen an die Bestellung, Herstellung, Prüfung, Inspektion und Lieferung von
Vormaterial aus Titan und Titanlegierungen fest. Sie ist anzuwenden, wenn sie bei Verweisung auf oder in
Verbindung mit der EN-Werkstoffnorm erwähnt wird, sofern in der Zeichnung, Bestellung oder der
Prüfanweisung nichts anderes angegeben ist.
Série aérospatiale - Titane et alliages de titane - Spécification technique - Partie 007: Produits pour refusion
Cette Norme européenne définit les exigences relatives aux commandes, fabrication, essais, contrôles et
livraison des produits pour refusion en titane et alliages de titane. La présente norme est applicable lorsqu'elle
est citée dans la norme de matériaux EN et conjointement avec celle-ci sauf instruction contraire figurant sur
le plan, la commande ou la fiche d’essai.
Aeronavtika - Titan in titanove zlitine - Tehnična specifikacija - 007. del: Material za pretaljevanje
Ta standard določa zahteve za naročanje, proizvodnjo, preskušanje, pregledovanje in dobavo materiala za pretaljevanje iz titana in titanovih zlitin. Uporablja se, kadar se nanaša na standard EN za materiale in skupaj z njim, razen če je drugače določeno na risbi, naročilu ali urniku pregleda.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 4800-007:2012
01-januar-2012
$HURQDYWLND7LWDQLQWLWDQRYH]OLWLQH7HKQLþQDVSHFLILNDFLMDGHO0DWHULDO]D
SUHWDOMHYDQMH
Aerospace series - Titanium and titanium alloys - Technical specification - Part 007:
Remelting stock
Luft- und Raumfahrt - Titan und Titanlegierungen Kneterzeugnisse - Technische
Lieferbedingungen - Teil 007: Vormaterial
Série aérospatiale - Titane et alliages de titane - Spécification technique - Partie 007:
Produits pour refusion
Ta slovenski standard je istoveten z: EN 4800-007:2010
ICS:
49.025.30 Titan Titanium
SIST EN 4800-007:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 4800-007:2012
---------------------- Page: 2 ----------------------
SIST EN 4800-007:2012
EUROPEAN STANDARD
EN 4800-007
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2010
ICS 49.025.30
English Version
Aerospace series - Titanium and titanium alloys - Technical
specification - Part 007: Remelting stock
Série aérospatiale - Titane et alliages de titane - Luft- und Raumfahrt - Titan und Titanlegierungen
Spécification technique - Partie 007: Produits pour refusion Kneterzeugnisse - Technische Lieferbedingungen - Teil
007: Vormaterial
This European Standard was approved by CEN on 20 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4800-007:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4800-007:2012
EN 4800-007:2010 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .6
4 Wording of order .6
5 Health and safety .7
6 Technical requirements .7
2
---------------------- Page: 4 ----------------------
SIST EN 4800-007:2012
EN 4800-007:2010 (E)
Foreword
This document (EN 4800-007:2010) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the
latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.