EN 4645-001:2010
(Main)Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 001: Technical specification
Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 001: Technical specification
This standard specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for threaded ring coupling circular fibre optic self-locking connectors, fire-resistant or non fire-resistant, intended for use in a temperature range from - 65 °C to 150 °C continuous.
Luft- und Raumfahrt - Optische Rundsteckverbinder mit Schraubkupplung, selbstsichernd, Einzel- und Multipin, Ferrulendurchmesser 1,25 mm, demontierbarer Zentrierhülsenhalter - Teil 001: Technische Lieferbedingungen
Diese Norm legt die allgemeinen Eigenschaften, Bedingungen für Qualifikation, Abnahme und Qualitätssicherung,
sowie die Prüfprogramme und -gruppen für LWL-Rundsteckverbinder mit Schraubkupplung, selbstsichernd,
feuerbeständig oder nicht feuerbeständig, die für die Anwendung in einem Temperaturbereich von
−65 °C bis 150 °C konstant vorgesehen sind, fest.
Série aérospatiale - Connecteurs optiques circulaires à accouplement par bague filetée, auto-freinante ferrule 1,25 équipés d'un porte sleeve démontable - Partie 001 : Spécificaton technique
Aeronavtika - Konektorji, optični, okrogli, z enim ali več zatiči, priključeni z navojnim obročkom, samozapiralni, s premerom kapice 1,25, s snemljivo centrirno pušo - 001. del: Tehnična specifikacija
Ta standard določa splošne zahteve, pogoje za upravičenost, odobritev in zagotavljanje kvalitete, kot tudi preskusne programe in skupine za samozapiralne optične konektorje, priključene z navojnim obročkom, ognjevarne in neognjevarne, namenjene za uporabo v temperaturah razpona od – 65 °C do 150 °C neprekinjeno.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Optische Rundsteckverbinder mit Schraubkupplung, selbstsichernd, Einzel- und Multipin, Ferrulendurchmesser 1,25 mm, demontierbarer Zentrierhülsenhalter - Teil 001: Technische LieferbedingungenSérie aérospatiale - Connecteurs optiques circulaires à accouplement par bague filetée, auto-freinante ferrule 1,25 équipés d' un porte sleeve démontable - Partie 001: Spécificaton techniqueAerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 001: Technical specification49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4645-001:2010SIST EN 4645-001:2010en01-marec-2010SIST EN 4645-001:2010SLOVENSKI
STANDARD
SIST EN 4645-001:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4645-001
January 2010 ICS 49.090 English Version
Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 001: Technical specification
Série aérospatiale - Connecteurs optiques circulaires à accouplement par bague filetée, auto-freinante ferrule 1,25 équipés d'un porte sleeve démontable - Partie 001 : Spécificaton technique
Luft- und Raumfahrt - Optische Rundsteckverbinder mit Schraubkupplung, selbstsichernd, Einzel- und Multipin, Ferrulendurchmesser 1,25 mm, demontierbarer Zentrierhülsenhalter - Teil 001: Technische Lieferbedingungen This European Standard was approved by CEN on 10 October 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4645-001:2010: ESIST EN 4645-001:2010
EN 4645-001:2010 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .6 4 Description .6 4.1 General .6 4.2 Receptacle .6 4.3 Plug .7 4.4 Materials and surface treatment .7 5 Design .7 5.1 Housings .7 5.2 Inserts .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.