EN 3475-100:2010

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General

This European Standard gives general information and the list of test methods for the different characteristics required for cables used in aircraft electrical circuits.

Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 100: Allgemeines

Diese Norm enthält allgemeine Angaben sowie die Auflistung der Prüfverfahren für die verschiedenen Anforderungen an Leitungen, die zur Ausrüstung der elektrischen Bordanlagen von Luftfahrzeugen bestimmt sind.

Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 100: Généralités

Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Preskusne metode - 100. del: Splošno

Ta evropski standard podaja splošne podatke in spisek preskusnih metod za različne lastnosti, ki so potrebne za kable, ki se uporabljajo v električnih krogotokih v zračnih plovilih.

General Information

• Status: Published
• Publication Date: 31-Aug-2010
• Withdrawal Date: 30-Mar-2011
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Sep-2010
• Completion Date: 01-Sep-2010
• Ref Project: SIST EN 3475-100:2010 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General

Relations

• Replaces: EN 3475-100:2002 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General
• Effective Date: 06-Sep-2010

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2010
1DGRPHãþD
SIST EN 3475-100:2004
$HURQDYWLND(OHNWULþQLNDEOL]DXSRUDERY]UDþQLKSORYLOLK3UHVNXVQHPHWRGH
GHO6SORãQR
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren -
Teil 100: Allgemeines
Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais -
Partie 100 : Généralités
Ta slovenski standard je istoveten z: EN 3475-100:2010
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 3475-100
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2010
ICS 49.060 Supersedes EN 3475-100:2002
English Version
Aerospace series - Cables, electrical, aircraft use - Test
methods - Part 100: General
Série aérospatiale - Câbles électriques à usage Luft- und Raumfahrt - Elektrische Leitungen für
aéronautique - Méthodes d'essais - Partie 100: Généralités Luftfahrtverwendung - Prüfverfahren - Teil 100:
Allgemeines
This European Standard was approved by CEN on 27 February 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3475-100:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Symbols and abbreviations .8
5 Test conditions .8
6 List of test methods .8

Foreword
This document (EN 3475-100:2010) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2011, and conflicting national standards shall be withdrawn at
the latest by March 2011.
This document supersedes EN 3475-100:2002.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
1 Scope
This European Standard gives general information and the list of test methods for the different characteristics
required for cables used in aircraft electrical circuits.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 3475 (all parts) Aerospace series — Cables, electrical, aircraft use — Test methods
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
conductor
conducting element of a cable formed from one or more strands
3.2
strand
metallic cylindrical component of uniform section used to form the conductor or shielding
3.3
plated strand
strand covered by a thin metallic layer in order to improve performance or facilitate connections
3.4
jacket
external covering of a cable containing one or more screened or unscreened conductor(s)
3.5
insulation
part of the cable surrounding the conductor and consisting of insulating ma
...