EN 2591-224:2007

Aerospace series - Elements of electrical and optical connection - Test methods - Part 224: RF leakage

This standard specifies a test method of measuring the total RF leakage of wired coaxial connectors.
It shall be used together with EN 2591-100.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 224: HF-Streuverlust

Diese Norm legt ein Prüfverfahren zur Messung des Gesamtstreuverlustes von verdrahteten koaxialen Steckverbindern fest.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 224: Fuite HF

Aeronavtika - Elementi električnih in optičnih povezav - Preskusne metode - 224. del: Radiofrekvenčno uhajanje

General Information

• Status: Published
• Publication Date: 18-Dec-2007
• Withdrawal Date: 29-Jun-2008
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 2591-224:2008 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 224: RF leakage

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 224: RF leakageSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 224: Fuite HFLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 224: HF-StreuverlustTa slovenski standard je istoveten z:EN 2591-224:2007SIST EN 2591-224:2008en49.060ICS:SLOVENSKI
STANDARDSIST EN 2591-224:200801-marec-2008







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-224December 2007ICS 49.060 English VersionAerospace series - Elements of electrical and optical connection- Test methods - Part 224: RF leakageSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 224: Fuite HFLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 224: HF-StreuverlustThis European Standard was approved by CEN on 27 April 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-224:2007: E



EN 2591-224:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Preparation of specimens.4 4 Apparatus.6 5 Method.6 6 Results.6



EN 2591-224:2007 (E) 3 Foreword This document (EN 2591-224:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2008, and conflicting national standards shall be withdrawn at the latest by June 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.



EN 2591-224:2007 (E) 4 1 Scope This standard specifies a test method of measuring the total RF leakage of wired coaxial connectors. It shall be used together with EN 2591-100. 2 Normative references T
...