ENV 14062-2:2001

Identification card systems - Surface transport applications - Electronic fee collection - Part 2: Message requirements

This European Prestandard specifies directly or by reference the message requirements for integrated circuit(s) cards (ICCs) carrying the EFC application and related requirements for On-Board-Units (OBUs) used in Electronic Fee Collection systems based on Dedicated Short Range Communication and Global System for Mobile Communication, with the target to provide basic interoperability between an ICC and an OBU independently of the respective manufacturers and operators. It takes into consideration both environmental and system related aspects and states minimum requirements of conformity.
The requirements imposed by this Prestandard apply to
· the IC card itself, denoted by the abbreviation ICC ;
· the in-vehicle card interface device, denoted by the abbreviation OBU ; or
· the combination of both.
This Prestandard does not directly set requirements on any other card interface device (IFD) besides the OBU e.g. stationary devices. However, the requirements imposed on the IC card may induce technical consequences for an IFD designed to accept an IC card used in EFC applications.
It specifies the respective characteristics of the ICC and OBU only as far as these may concern the interface, but does not give any internal technical implementation.

Sistemi z identifikacijskimi karticami - Aplikacije za prevoze po kopnem - Elektronsko pobiranje pristojbin - 2. del: Zahteve za sporočila

Ta evropski predstandard neposredno ali s sklicem določa zahteve za sporočila za kartice z integriranim vezjem (ICC) z aplikacijo elektronskega pobiranja pristojbin ter povezane zahteve za enote v vozilu (OBU), ki se uporabljajo v sistemih za elektronsko pobiranje pristojbin (EFC) na osnovi namenske komunikacije kratkega dosega in globalnega sistema mobilnih komunikacij s ciljem zagotavljanja osnovne interoperabilnosti med kartico z integriranim vezjem in enoto v vozilu neodvisno od zadevnih proizvajalcev in operaterjev. Obravnava okoljske in s sistemom povezane vidike ter navaja minimalne zahteve za skladnost.
Zahteve, ki jih nalaga za predstandard, se uporabljajo za
samo kartico z integriranim vezjem, ki jo označuje okrajšava ICC;
vmesniško napravo za kartice v vozilu, ki jo označuje okrajšava OBU, ali
kombinacijo obojega.
Ta predstandard neposredno ne določa zahtev za katero koli drugo vmesniško napravo za kartice (IFD) poleg enote v vozilu, npr. stacionarne naprave. Vendar pa zahteve, ki veljajo za kartico z integriranim vezjem, lahko imajo tehnične posledice za vmesniško napravo za kartice, zasnovano za sprejem kartice z integriranim vezjem, ki se uporablja v aplikacijah elektronskega pobiranja pristojbin.
Zadevne značilnosti kartice z integriranim vezjem in enote v vozilu določa samo v meri, v kateri te zadevajo vmesnik, ne podaja pa nikakršne notranje tehnične izvedbe.

General Information

• Status: Withdrawn
• Publication Date: 19-Jun-2001
• Withdrawal Date: 13-Apr-2025
• ICS: 35.240.15 - Identification cards. Chip cards. Biometrics
• Technical Committee: CEN/TC 224 - Machine-readable cards, related device interfaces and operations
• Drafting Committee: CEN/TC 224 - Machine-readable cards, related device interfaces and operations
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 17-Jun-2020
• Completion Date: 14-Apr-2025
• Directive: 93/89/EEC - Taxes on certain vehicles used for the carriage of goods by road and tolls and charges for the use of certain infrastructures
• Mandate: M/211 - Standardization mandate forwarded to CEN/CENELEC/ETSI in the field of information technology and telecommunications concerning Standards for IC cards for road toll collection
• Ref Project: SIST ENV 14062-2:2018 - Identification card systems - Surface transport applications - Electronic fee collection - Part 2: Message requirements

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2018
6LVWHPL]LGHQWLILNDFLMVNLPLNDUWLFDPL$SOLNDFLMH]DSUHYR]HSRNRSQHP
(OHNWURQVNRSRELUDQMHSULVWRMELQGHO=DKWHYH]DVSRURþLOD
Identification card systems - Surface transport applications - Electronic fee collection -
Part 2: Message requirements
Ta slovenski standard je istoveten z: ENV 14062-2:2001
ICS:
35.240.15 ,GHQWLILNDFLMVNHNDUWLFHýLSQH Identification cards. Chip
NDUWLFH%LRPHWULMD cards. Biometrics
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN PRESTANDARD
ENV 14062-2
PRÉNORME EUROPÉENNE
EUROPÄISCHE VORNORM
June 2001
ICS 35.240.15
English version
Identification card systems - Surface transport applications -
Electronic fee collection - Part 2: Message requirements
This European Prestandard (ENV) was approved by CEN on 10 May 2001 as a prospective standard for provisional application.
The period of validity of this ENV is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the ENV can be converted into a European Standard.
CEN members are required to announce the existence of this ENV in the same way as for an EN and to make the ENV available promptly
at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the ENV) until the final
decision about the possible conversion of the ENV into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. ENV 14062-2:2001 E
worldwide for CEN national Members.

Page 2
Contents
Foreword.3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions.6
4 Abbreviations .6
5 EFC using DSRC .7
5.1 Message requirements .7
5.1.1 General.7
5.1.2 APDU requirements .7
5.1.3 Command set .7
5.2 Application layer requirements .10
5.2.1 File system.10
5.2.2 File referencing .11
5.2.3 Data referencing methods.11
6 EFC using GSM .11
Bibliography .12

Page 3
Foreword
This European Prestandard has been prepared by Technical Committee CEN/TC 224, "Machine readable cards,
related device interfaces and operations" the secretariat of which is held by AFNOR.
This European Prestandard comprises the following parts, under the general title “Identification card systems –
Surface transport applications – Electronic fee collection”:

Part 1 : Physical characteristics, electronic signals and transmission protocols


Part 2 : Message requirements

Part 3 : Application and security aspects

Part 4 : Test procedures
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this European Prestandard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,
Switzerland and the United Kingdom.

Page 4
Introduction
This European Prestandard is one of a series of Standards describing the characteristics of IC cards used in
Electronic Fee Collection (EFC) systems based on
 the Dedicated Short Range Communication (DSRC) ; and
 the Global System for Mobile Communication (GSM) ;
and the characteristics of the interface between those IC cards and the related card interface devices installed in
vehicles, so-called On-Board-Units.
It is not envisaged that the complete set of functions and data structures described herein is present in each piece
of EFC equipment, be it OBU or ICC. Thus, not every command or file type has to be present in an OBU or an ICC
in order for it to be compliant with this European Prestandard.

Page 5
1 Scope
This European Prestandard specifies directly or by reference the message requirements for integrated circuit(s)
cards (ICCs) carrying the EFC application and related requirements for On-Board-Units (OBUs) used in Electronic
Fee Collection systems based on Dedicated Short Range Communication and Global System for Mobile
Communication, with the target to provide basic interoperability between an ICC and an OBU independently of the
respective manufacturers and operators. It takes into consideration both environmental and system related aspects
and states minimum requirements of conformity.
The requirements imposed by this Prestandard apply to
 the IC card itself, denoted by the abbreviation ICC ;
 the in-vehicle card interface device, denoted by the abbreviation OBU ; or
 the combination of both.
This Prestandard does not directly set requirements on any other card interface device (IFD) besides the OBU e.g.
stationary devices. However, the requirements imposed on the IC card may induce technical consequences for an
IFD designed to accept an IC card used in EFC applications.
It specifies the respective characteristics of the ICC and OBU only as far as these may concern the interface, but
does not give any internal technical implementation.
2 Normative references
This European Prestandard incorporates by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of these publications apply to this European
Prestandard only when incorporated in it by amendment or revision. For undated references the latest edition of the
publication referred to applies (including amendments).
EN 726-3:1994, Identification card systems – Telecommunications integrated circuit(s) cards and terminals –
Part 3 : Application independent card requirements.
ENV 1545-1:1998, Identification card systems – Surface transport applications – Part 1 : General data elements.
ENV 1545-2:1998, Identification card systems – Surface transport applications – Part 2 : Transport payment related
data elements.
ENV ISO 14906:1998, Road transport and traffic telematics (RTTT) – Electronic Fee Collection (EFC) – Application
interface definition for dedicated short range communications (ISO/TR 14906:1998).
ETS 300 699, European digital cellular telecommunications system (Phase 2+) – Specification of the Subscriber
Identity Module – Mobile Equipment (SIM – ME) interface (GSM 11.11 V 5.5.0).
ISO/IEC 7816-3:1997, Identification cards — Integrated circuit(s) cards with contacts — Part 3 : Electronic signals
and transmission protocols.
ISO/IEC 7816-4:1995, Identification cards — Integrated circuit(s) cards with contacts — Part 4 : Inter-industry
commands for interchange.
ISO/IEC 7816-5:1994, Identification cards — Integrated circuit(s) cards with contacts — Part 5 : Numbering system
and registration procedure for application id
...