EN 12616:2013

Surfaces for sports areas - Determination of water infiltration rate

This European Standard specifies three methods for the determination of water infiltration rate. Method A is suitable for synthetic, textile, synthetic turf and bound mineral sports surfaces, Method B is suitable for natural turf and Method C is suitable for unbound mineral sports surfaces.
NOTE   For filled synthetic turf and unbound mineral surfaces, laboratory tests are considered to give a more precise indication of how a surface will perform.

Sportböden - Bestimmung der Wasserinfiltrationsrate

Diese Europäische Norm legt drei Verfahren zur Bestimmung der Wasserinfiltrationsrate (des Wasserschluck-wertes) fest. Verfahren A eignet sich für Sportböden mit Flächen aus Kunststoff, textilen Belägen, Kunststoffrasen und gebundenden mineralischen Materialien, Verfahren B ist auf Sportböden mit Flächen aus Naturrasen und Verfahren C auf Sportböden mit Flächen aus ungebundenen mineralischen Materialien anwendbar.
ANMERKUNG   In einem Laboratorium durchgeführte Prüfungen an gefüllten Kunststoffrasenflächen und an Flächen aus ungebundenen mineralischen Materialien ergeben eine präzisere Aussage darüber, wie sich eine derartige Fläche verhalten wird.

Sols sportifs - Détermination de la vitesse d'infiltration de l'eau

La présente Norme Européenne fixe trois méthodes d'essai visant à déterminer la vitesse d'infiltration de l'eau. La méthode A s'applique aux sols sportifs synthétiques en textiles, en gazon synthétique et en matériaux minéraux liés, la méthode B est applicable au gazon naturel et la méthode C est applicable aux sols sportifs en matériaux minéraux non liés.
NOTE   En ce qui concerne les sols en gazon synthétique comportant un matériau de remplissage et les sols en matériaux minéraux non liés, on considère que les essais en laboratoire donnent une indication plus précise du comportement du sol.

Podloge za športne dejavnosti - Ugotavljanje stopnje prepojitve z vodo

Ta evropski standard določa tri metode za ugotavljanje stopnje prepojitve z vodo. Metoda A je primerna za športno podlogo iz umetnih in tekstilnih snovi, umetno travnato podlogo ter vezane mineralne športne podloge, metoda B je primerna za naravno travnato podlogo, metoda C pa za nevezane mineralne športne podloge.

General Information

• Status: Withdrawn
• Publication Date: 03-Sep-2013
• Withdrawal Date: 10-Jan-2023
• ICS: 97.220.10 - Sports facilities
• Technical Committee: CEN/TC 217 - Surfaces for sport areas
• Drafting Committee: CEN/TC 217/WG 6 - Synthetic turf areas
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 11-Jan-2023
• Ref Project: SIST EN 12616:2013 - Surfaces for sports areas - Determination of water infiltration rate

Relations

• Replaces: EN 12616:2003 - Surfaces for sports areas - Determination of water infiltrattion rate
• Effective Date: 08-Jun-2022
• Replaced By: EN 12616:2023 - Surfaces for sports areas - Test methods for the determination of vertical water infiltration and horizontal water flow rates
• Effective Date: 05-May-2021

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Podloge za športne dejavnosti - Ugotavljanje stopnje prepojitve z vodoSportböden - Bestimmung der WasserinfiltrationsrateSols sportifs - Détermination de la vitesse d'infiltration de l'eauSurfaces for sports areas - Determination of water infiltration rate97.220.10Športni objektiSports facilitiesICS:Ta slovenski standard je istoveten z:EN 12616:2013SIST EN 12616:2013en,fr,de01-november-2013SIST EN 12616:2013SLOVENSKI
STANDARDSIST EN 12616:20031DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12616
September 2013 ICS 97.220.10 Supersedes EN 12616:2003English Version
Surfaces for sports areas - Determination of water infiltration rate
Sols sportifs - Détermination de la vitesse d'infiltration de l'eau
Sportböden - Bestimmung der Wasserinfiltrationsrate This European Standard was approved by CEN on 11 July 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12616:2013: ESIST EN 12616:2013
...