EN 3218-010:2006

Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 010: Protective covers for EN 3218-006 and EN 3218-008 connectors - Product standard

This standard specifies the characteristics of protective covers for rectangular connectors conforming to EN 3218-006 and EN 3218-008.

Luft- und Raumfahrt - Rechtecksteckverbinder mit metallischem Gehäuse und Schraubverriegelung - Teil 010: Schutzkappen für Steckverbinder EN 3218-006 und EN 3218-008 Steckverbinder - Produktnorm

Diese Norm legt die Eigenschaften von Schutzkappen für Rechtecksteckverbinder nach EN 3218 006 und EN 3218 008 fest.

Série aérospatiale - Connecteurs rectangulaires à boîtiers métalliques et à verrouillage par vis - Partie 010 : Bouchons de vol pour connecteurs EN 3218-006 et EN 3218-008 - Norme de produit

Aeronavtika - Konektorji, pravokotni, s kovinskim ohišjem in vijačnim zaklepanjem - 010. del: Zaščitne kape za konektorje 3218-006 in EN 3218-008 - Standard za proizvod

General Information

• Status: Published
• Publication Date: 25-Apr-2006
• Withdrawal Date: 30-Oct-2006
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 01-Jun-2017
• Ref Project: SIST EN 3218-010:2009 - Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 010: Protective covers for EN 3218-006 and EN 3218-008 connectors - Product standard

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SURL]YRGLuft- und Raumfahrt - Rechtecksteckverbinder mit metallischem Gehäuse und Schraubverriegelung - Teil 010: Schutzkappen für Steckverbinder EN 3218-006 und EN 3218-008 Steckverbinder - ProduktnormSérie aérospatiale - Connecteurs rectangulaires à boîtiers métalliques et à verrouillage par vis - Partie 010 : Bouchons de vol pour connecteurs EN 3218-006 et EN 3218-008 - Norme de produitAerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 010: Protective covers for EN 3218-006 and EN 3218-008 connectors - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3218-010:2006SIST EN 3218-010:2009en,de01-julij-2009SIST EN 3218-010:2009SLOVENSKI
STANDARD



SIST EN 3218-010:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3218-010April 2006ICS 49.060 English VersionAerospace series - Connectors, rectangular, with metallic shellsand screw-locking - Part 010: Protective covers for EN 3218-006and EN 3218-008 connectors - Product standardSérie aérospatiale - Connecteurs rectangulaires à boîtiersmétalliques et à verrouillage par vis - Partie 010 : Bouchonsde vol pour connecteurs EN 3218-006 et EN 3218-008 -Norme de produitLuft- und Raumfahrt - Rechtecksteckverbinder mitmetallischem Gehäuse und Schraubverriegelung - Teil 010:Schutzkappen für EN 3218-006 und EN 3218-008Steckverbinder - ProduktnormThis European Standard was approved by CEN on 27 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3218-010:2006: ESIST EN 3218-010:2009



EN 3218-010:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Description.4 5 Designation.6 6 Marking.6 7 Technical specification.6
SIST EN 3218-010:2009



EN 3218-010:2006 (E) 3 Foreword This European Standard (EN 3218-010:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2006, and conflicting national standards shall be withdrawn at the latest by October 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identi
...