EN ISO 19956:2004

Footwear - Test methods for heels - Fatigue resistance (ISO 19956:2004)

ISO 19956:2004 specifies a test method for determining the ability of heels of ladies' shoes to withstand the repeated small impacts imposed by normal walking. Although intended primarily for plastic heels, the procedure is also usable for testing steel heel dowels on their own.
While the test method is applicable to all types of high heels of any construction, it is particularly useful for injection-moulded plastic heels that incorporate a steel dowel reinforcement.

Schuhe - Prüfverfahren für Absätze - Ermüdungswiderstand (ISO 19956:2004)

Chaussures - Méthodes d'essai relatives aux talons - Résistance à la fatigue (ISO 19956:2004)

L'ISO 19956 spécifie une méthode d'essai pour déterminer l'aptitude des talons de chaussures pour femmes à supporter les petits chocs répétés imposés par la marche normale. Bien que destinée en premier lieu aux talons en plastique, le mode opératoire est également utilisable pour l'essai des goupilles de talon en acier.
La méthode d'essai est applicable à tous les types de talons hauts, quelle que soit leur construction, mais elle est particulièrement utile pour les talons en plastique moulés par injection, qui incorporent une goupille de renfort en acier.

Obutev – Preskusne metode za pete – Odpornost proti utrujanju (ISO 19956:2004)

General Information

• Status: Published
• Publication Date: 14-Sep-2004
• Withdrawal Date: 30-Mar-2005
• ICS: 61.060 - Footwear
• Technical Committee: CEN/TC 309 - Footwear
• Drafting Committee: CEN/TC 309/WG 1 - Minimum performance requirements and test methods for components for footwear
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 21-Oct-2008
• Completion Date: 21-Oct-2008
• Ref Project: SIST EN ISO 19956:2005 - Footwear - Test methods for heels - Fatigue resistance (ISO 19956:2004)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19956:2005
01-marec-2005
Obutev – Preskusne metode za pete – Odpornost proti utrujanju (ISO 19956:2004)
Footwear - Test methods for heels - Fatigue resistance (ISO 19956:2004)
Schuhe - Prüfverfahren für Absätze - Ermüdungswiderstand (ISO 19956:2004)
Chaussures - Méthodes d'essai relatives aux talons - Résistance a la fatigue (ISO
19956:2004)
Ta slovenski standard je istoveten z: EN ISO 19956:2004
ICS:
61.060 Obuvala Footwear
SIST EN ISO 19956:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 19956:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 19956:2005
EUROPEAN STANDARD
EN ISO 19956
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2004
ICS 61.060

English version
Footwear - Test methods for heels - Fatigue resistance (ISO
19956:2004)
Chaussures - Méthodes d'essai relatives aux talons - Schuhe - Prüfverfahren für Absätze -
Résistance à la fatigue (ISO 19956:2004) Ermüdungswiderstand (ISO 19956:2004)
This European Standard was approved by CEN on 2 March 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19956:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 19956:2005
EN ISO 19956:2004 (E)
Contents               page
Foreword.3
1 Scope .4
2 Terms and definitions .4
3 Apparatus and material.4
4 Sampling and conditioning.6
5 Test method.6
6 Expression of results .7
7 Test report .7


2

---------------------- Page: 4 ----------------------

SIST EN ISO 19956:2005
EN ISO 19956:2004 (E)
Foreword
This document (EN ISO 19956:2004) has been prepared by Technical Committee CEN /TC 309 "Footwear", the
secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 216 "Footwear".
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by March 2005, and conflicting national standards shall be withdrawn at the latest by
March 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 19956:2005
E
...