Aerospace series - Flange couplings - Gasket seal with nickel alloy C seal on heat resisting steel plate with 3 fastening holes - Inch series

This standard specifies the characteristics of gasket seal with nickel alloy C seal on heat resisting steel, 3 holes, for pipe couplings for inch series aerospace applications.
Nominal pressure: up to 21 000 kPa; depends on the associated tube material and tube wall thickness in the assembly (see EN 4814).
Temperature range: - 55 °C to 600 °C.
NOTE   Assembly in accordance with TR 4815.
This part should not be reused after disassembling.

Luft- und Raumfahrt - Rohrverschraubung mit Flanschen - Flachdichtung aus Nickellegierung, mit Stahlummantelung aus hochwarmfestem Stahl mit 3 Befestigungslöchern - Inch-Reihe

Série aérospatiale - Raccordement à bride - Joint plaque avec joint C en alliage de nickel sur plaque en acier résistant à chaud avec 3 trous de fixation - Série en inches

Aeronavtika - Prirobnične spojke - Tesnilo z zalivko iz nikljeve zlitine C na toplotno odporni jekleni plošči s tremi pritrdilnimi luknjami - Colska izvedba

General Information

Status
Published
Publication Date
25-Apr-2017
Withdrawal Date
30-Oct-2017
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
26-Apr-2017
Completion Date
26-Apr-2017

Buy Standard

Standard
EN 4810:2018
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
SIST EN 4810:2018
01-marec-2018
$HURQDYWLND3ULUREQLþQHVSRMNH5REQDWHVQLOD]]DOLYNRL]QLNOMHYH]OLWLQHQD
WRSORWQRRGSRUQLMHNOHQLSORãþLVSULWUGLOQLPLOXNQMDPL3DOþQHPHUH
Aerospace series - Flange couplings - Gasket seal with nickel alloy C seal on heat
resisting steel plate with 3 fastening holes - Inch series
Luft- und Raumfahrt - Rohrverschraubung mit Flanschen - Flachdichtung aus
Nickellegierung, mit Stahlummantelung aus hochwarmfestem Stahl mit 3
Befestigungslöchern - Inch-Reihe
Série aérospatiale - Raccordement à bride - Joint plaque avec joint C en alliage de nickel
sur plaque en acier résistant à chaud avec 3 trous de fixation - Série en inches
Ta slovenski standard je istoveten z: EN 4810:2017
ICS:
23.040.60 Prirobnice, oglavki in spojni Flanges, couplings and joints
elementi
49.080 /HWDOVNLLQYHVROMVNL Aerospace fluid systems and
KLGUDYOLþQLVLVWHPLLQGHOL components
SIST EN 4810:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 4810:2018
SIST EN 4810:2018
EN 4810
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2017
EUROPÄISCHE NORM
ICS 49.080
English Version
Aerospace series - Flange couplings - Gasket seal with
nickel alloy C seal on heat resisting steel plate with 3
fastening holes - Inch series
Série aérospatiale - Raccordement à bride - Joint Luft- und Raumfahrt - Rohrverschraubung mit
plaque avec joint C en alliage de nickel sur plaque en Flanschen - Flachdichtung aus Nickellegierung, mit
acier résistant à chaud avec 3 trous de fixation - Série Stahlummantelung aus hochwarmfestem Stahl mit 3
en inches Befestigungslöchern - Inch-Reihe
This European Standard was approved by CEN on 14 November 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4810:2017 E
worldwide for CEN national Members.

SIST EN 4810:2018
Contents
Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Required characteristics . 5
4 Designation . 7
5 Identification marking . 7
6 Technical specification . 7
7 Quality Assurance. 7

SIST EN 4810:2018
European foreword
This document (EN 4810:2017) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2017, and conflicting national standards shall be withdrawn
at the latest by October 2017.
Attention is drawn to the possibility that some of the elements of this document may be th
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.