GRP tanks and vessels for use above ground - Part 5: Example calculation of a GRP-vessel

This Technical Report gives guidance for the design of a vessel using the standard EN 13121 3 GRP tanks and vessels for use above ground. The calculation is done according to the advanced design method given in EN 13121 3:2016, 7.9.3 with approved laminates and laminate properties.

Oberirdische GFK-Tanks und -Behälter - Teil 5: Berechnungsbeispiel für einen Behälter aus GFK

Dieser Technische Report enthält eine Anleitung für die Bemessung eines Behälters nach EN 13121 3. Die Berechnung erfolgt nach dem in EN 13121 3:2016, 7.9.3, angegebenen fortgeschrittenen Bemessungs-verfahren mit geprüften Laminaten und statistisch abgesicherten Laminateigenschaften.

Nadzemni rezervoarji in posode iz umetnih mas, ojačanih s steklenimi vlakni - 5. del: Primer izračuna

To tehnično poročilo vsebuje smernice za projektiranje posode na podlagi uporabe standarda EN 13121-3 za cisterne in posode GRP za uporabo nad tlemi. Izračun se izvede v skladu z naprednim načinom projektiranja, navedenim v standardu EN 13121-3:2016, 7.9.3, z odobrenimi laminati in lastnostmi laminatov.

General Information

Status
Published
Publication Date
30-May-2017
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
31-May-2017
Due Date
19-Aug-2018
Completion Date
31-May-2017

Buy Standard

Technical report
TP CEN/TR 13121-5:2018 - BARVE
English language
58 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
kTP FprCEN/TR 13121-5:2017
English language
58 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 13121-5:2018
01-maj-2018
1DG]HPQLUH]HUYRDUMLLQSRVRGHL]XPHWQLKPDVRMDþDQLKVVWHNOHQLPLYODNQL
GHO3ULPHUL]UDþXQD
GRP tanks and vessels for use above ground - Part 5: Example calculation of a GRP-
vessel
Ta slovenski standard je istoveten z: CEN/TR 13121-5:2017
ICS:
23.020.10 1HSUHPLþQHSRVRGHLQ Stationary containers and
UH]HUYRDUML tanks
SIST-TP CEN/TR 13121-5:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN/TR 13121-5:2018

---------------------- Page: 2 ----------------------

SIST-TP CEN/TR 13121-5:2018


CEN/TR 13121-5
TECHNICAL REPORT

RAPPORT TECHNIQUE

May 2017
TECHNISCHER BERICHT
ICS 23.020.10
English Version

GRP tanks and vessels for use above ground - Part 5:
Example calculation of a GRP-vessel



This Technical Report was approved by CEN on 18 April 2017. It has been drawn up by the Technical Committee CEN/TC 210.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 13121-5:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN/TR 13121-5:2018
CEN/TR 13121-5:2017 (E)
Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
2 General . 7
3 Dimensions of the tank . 7
4 Building materials . 9
5 Loadings (9) . 9
6 Limit strain for laminate (8.2.2) . 11
7 Influence factors (7.9.5.2) . 11
8 Partial safety factors (Table 12) . 12
9 Combination factors (Table 11) . 12
10 Analysis of the cylinder . 12
10.1 Influence factor A . 12
5
10.2 Characteristic strength values . 13
10.3 Moduli of elasticity . 13
10.4 Analysis of the cylinder in axial direction . 13
10.4.1 Proof of strength (Ultimate limit state) . 14
10.4.2 Proof of strain (Serviceability limit state) . 17
10.4.3 Stability proof (Ultimate limit state) . 19
10.5 Analysis of the cylinder in tange
...

SLOVENSKI STANDARD
kSIST-TP FprCEN/TR 13121-5:2017
01-marec-2017
1DG]HPQLUH]HUYRDUMLLQSRVRGHL]XPHWQLKPDVRMDþDQLKVVWHNOHQLPLYODNQL
GHO3ULPHUL]UDþXQD
GRP tanks and vessels for use above ground - Part 5: Example calculation of a GRP-
vessel
Ta slovenski standard je istoveten z: FprCEN/TR 13121-5
ICS:
23.020.10 1HSUHPLþQHSRVRGHLQ Stationary containers and
UH]HUYRDUML tanks
kSIST-TP FprCEN/TR 13121-5:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST-TP FprCEN/TR 13121-5:2017

---------------------- Page: 2 ----------------------
kSIST-TP FprCEN/TR 13121-5:2017


FINAL DRAFT
TECHNICAL REPORT
FprCEN/TR 13121-5
RAPPORT TECHNIQUE

TECHNISCHER BERICHT

December 2016
ICS 23.020.10
English Version

GRP tanks and vessels for use above ground - Part 5:
Example calculation of a GRP-vessel



This draft Technical Report is submitted to CEN members for Vote. It has been drawn up by the Technical Committee CEN/TC
210.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a Technical Report. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a Technical Report.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TR 13121-5:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
kSIST-TP FprCEN/TR 13121-5:2017
FprCEN/TR 13121-5:2016 (E)
Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
2 General . 7
3 Dimensions of the tank . 7
4 Building materials . 9
5 Loadings (9) . 9
6 Limit strain for laminate (8.2.2) . 11
7 Influence factors (7.9.5.2) . 11
8 Partial safety factors (Table 12) . 12
9 Combination factors (Table 11) . 12
10 Analysis of the cylinder . 12
10.1 Influence factor A . 13
5
10.2 Characteristic strength values . 13
10.3 Moduli of elasticity . 13
10.4 Analysis of the cylinder in axial direction . 13
10.4.1 Proof of strength (Ultimate limit state) .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.