iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 196-5:1994

(Main)

Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement

Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement

This European standard describes the method of measuring the pozzolanicity of pozzolanic cements conforming to the definition in EN 197-1. This standard does not apply to Portland pozzolana cements or to pozzolanas. This method constitutes the reference procedure.

Prüfverfahren für Zement - Teil 5: Prüfung der Puzzolanität von Puzzolanzementen

Diese europäische Norm beschreibt das Verfahren zur Prüfung der Puzzolanität von Puzzolanzementen, die der Begriffsbestimmung in der europäischen Vornorm ENV 197-1 entsprechen. Die Norm gilt nicht für Portlandpuzzolanzemente und nicht für Puzzolane. Dieses Verfahren ist das Referzneverfahren.

Méthodes d'essais des ciments - Partie 5: Essai de pouzzolanicité des ciments pouzzolaniques

La présente norme européenne décrit la méthode de mesure de la pouzzolanicité des ciments pouzzoloniques répondant à la définition de la norme européenne EN 197-1. La norme n'est pas applicable aux ciments portlands à la pouzzolane ni aux pouzzolanes. Cette méthode constitue le mode opératoire de référence.

Metode preskušanja cementa - 5. del: Določanje pucolanske aktivnosti za pucolanske cemente

General Information

Status
Withdrawn
Publication Date
15-Dec-1994
Withdrawal Date
15-Feb-2005
ICS
91.100.10 - Cement. Gypsum. Lime. Mortar
Technical Committee
CEN/TC 51 - Cement and building limes
Drafting Committee
CEN/TC 51 - Cement and building limes
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
16-Feb-2005
Completion Date
16-Feb-2005
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/114 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on cements, buliding limes, and other hydr. binders
Ref Project
SIST EN 196-5:1995 - Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement

Relations

Replaced By
EN 196-5:2005 - Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement
Effective Date
22-Dec-2008

Buy Standard

EN 196-5:1995EN 196-5:1995
PreviousNext
Standard + National Annex and/or Foreword
EN 196-5:1995
Foreword and/or annex in Slovenian language, body of the standard in English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 197-6:2023(Main)
Cement - Part 6: Cement with recycled building materials
SIST EN 197-6:2023

This document specifies cement with recycled concrete fines whose intended use is the preparation of concrete, mortar, grout, etc.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16908:2017+A1:2022(Main + Amendment)
Cement and building lime - Environmental product declarations - Product category rules complementary to EN 15804
SIST EN 16908:2017+A1:2022

The general scope of the core product category rules (PCR) is given in EN 15804:2012+A2:2019, Clause 1.
This PCR is primarily intended for the creation of cradle-to-gate EPDs of cement and building lime.
In other respects, the scope is as in EN 15804:2012+A2:2019.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 459-2:2021(Main)
Building lime - Part 2: Test methods
SIST EN 459-2:2021

This document specifies the test methods for all building limes covered by EN 459 1. They can also be applied to other lime materials, the standards for which call up these methods.
This document specifies in Table 2 the methods used for the chemical analyses and the determination of physical properties of building limes.
This document specifies the reference methods and, in certain cases, an alternative method which can be considered to be equivalent. In the case of a dispute, only the reference methods are used.
Any other methods may be used provided they are calibrated, either against the reference methods or against internationally accepted reference materials, in order to demonstrate their equivalence.

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 197-5:2021(Main)
Cement - Part 5: Portland-composite cement CEM II/C-M and Composite cement CEM VI
SIST EN 197-5:2021

This document deals with Portland-composite cement CEM II/C-M, not covered by EN 197-1, and a different type of Composite cement CEM VI, also not covered by EN 197-1, whose intended use is the preparation of concrete, mortar, grout etc.
This document does not cover:
- common cement covered by EN 197-1;
- very low heat special cement covered by EN 14216;
- supersulfated cement covered by EN 15743;
- calcium aluminate cement covered by EN 14647;
- masonry cement covered by EN 413-1.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 197-2:2020(Main)
Cement - Part 2: Assessment and verification of constancy of performance
SIST EN 197-2:2020

This document specifies the scheme for the assessment and verification of constancy of performance (AVCP) of cements, including certification of constancy of performance.
The document provides technical rules for factory production control, further testing of samples taken at the manufacturing plant (autocontrol testing) and assessment of the performance of the cement, initial inspection of the manufacturing plant and of factory production control, continuing surveillance, assessment and evaluation of factory production control and audit-testing of samples. It also provides rules for actions to be followed in the event of non-conformity and requirements for depots.
In this document, the word "cement" is used to refer both to common cements as defined in EN 197 1 and to other cements and binders for which the relevant product specification standard makes reference to this document and which are submitted for certification. Such a cement is produced at a given factory and belongs to a particular type and a particular strength class, as defined and specified in the relevant product specification standard.
The guidelines given in the Technical Report CEN/TR 14245 [1] contain information for the application of this document.
This document is linked with the Annexes ZA of European Standards covering cements and binders, i.e. EN 197 1, EN 14216, EN 14647, EN 413 1 and EN 15743.
NOTE   The reason for having drafted this separate document is that the provisions it includes are applicable to different products covered by different European Standards.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 14245:2020(Main)
Cement - Guidelines for the application of EN 197-2: Assessment and verification of constancy of performance
SIST-TP CEN/TR 14245:2020

This document specifies the scheme for the assessment and verification of constancy of performance (AVCP) of cements, including certification of constancy of performance.
The document provides technical rules for factory production control, further testing of samples taken at the manufacturing plant (autocontrol testing) and assessment of the performance of the cement, initial inspection of the manufacturing plant and of factory production control, continuing surveillance, assessment and evaluation of factory production control and audit-testing of samples. It also provides rules for actions to be followed in the event of non-conformity and requirements for depots.
In this document, the word “cement” is used to refer both to common cements as defined in EN 197 1 and to other cements and binders for which the relevant product specification standard makes reference to this document and which are submitted for certification. Such a cement is produced at a given factory and belongs to a particular type and a particular strength class, as defined and specified in the relevant product specification standard.
The guidelines given in the Technical Report CEN/TR 14245 contain information for the application of this document.
This document is linked with Annexes ZA of European Standards covering cements and binders, i.e. EN 197 1, EN 14216, EN 14647, EN 413 1 and EN 15743.
NOTE   The reason for having drafted this separate document is that the provisions it includes are applicable to different products covered by different European Standards.
Guidance
EN 197 2 deals with the assessment and verification of constancy of performance (AVCP) of cements and binders that are submitted for certification. It deals in particular with cases where “further testing” of the product is undertaken, as is the case for attestation system 1+ under the Construction Products Regulation. The products for which EN 197 2 is applicable are: the common cement products and the low heat cements and the sulfate resisting cements, refer to EN 197 1, the very low heat special cements, refer to EN 14216, the supersulfated cements, refer to EN 15743, the calcium aluminate cements, refer to EN 14647, and the masonry cements, refer to EN 413 1.

  • Technical report
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17365:2019(Main)
Method for the determination of C3A in the clinker from cement analysis
SIST-TP CEN/TR 17365:2019

This document describes the analytical procedures used to determine the content of C3A in the clinker starting from a chemical analysis on cement. The method can be applied to CEM type I and IV for the determination of the requirement of C3A, as defined on EN 197 1.
This document describes two methods, traditional wet and XRF analysis (EN 196 2), which can be considered to be equivalent, in the scope of this CEN/TR 17365, for the determination of Al2O3, Fe2O3 and SO3.
The same methods are described in EN 196 2, but for the scope of this document, the X-ray fluorescence (XRF) is the preferred method to be used for the determination of Al2O3, Fe2O3 and SO3.

  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 196-6:2018(Main)
Methods of testing cement - Part 6: Determination of fineness
SIST EN 196-6:2019

This European Standard describes three methods of determining the fineness of cement.
The sieving method serves only to demonstrate the presence of coarse cement particles. This method is primarily suited to checking and controlling the production process.
The air-jet sieving method measures the retention on sieving and is suitable for particles which substantially pass a 2,0 mm test sieve. It may be used to determine the particle size distribution of agglomerates of very fine particles. This method may be used with test sieves in a range of aperture sizes, e.g. 63 μm and 90 μm.
The air permeability method (Blaine) measures the specific surface area (mass related surface area) by comparison with a reference material sample. The determination of the specific surface area serves primarily to check the consistency of the grinding process of one and the same plant. This method only enables a limited assessment of the properties of the cement in use.
NOTE   The air permeability method may not give significant results for cements containing ultrafine materials.
The methods are applicable to all the cements defined in EN 197.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 196-11:2018(Main)
Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method
SIST EN 196-11:2019

This document specifies the apparatus and procedure for determining the heat of hydration of cements and other hydraulic binders at different test ages by isothermal conduction calorimetry.
This test procedure is intended for measuring the heat of hydration of cement up to 7 days in order to obtain correspondence between Isothermal Conduction Calorimetry (ICC) and EN 196 8 and EN 196 9. Nevertheless this test duration may be critical for some apparatus, even if they can work properly at shorter test ages.
Contrary to EN 196 8 this method gives the heat of hydration continuously over the time. Additionally, the heat flow versus time is given.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13639:2017(Main)
Determination of total organic carbon in limestone
SIST EN 13639:2017

This European Standard specifies methods for the determination of the total organic carbon content (TOC) in limestone.
The standard describes the reference method and alternative methods which can be considered to be equivalent.
In the case of a dispute, only the reference method is used.
Any other methods may be used provided they are calibrated, either against the reference method or against internationally accepted reference materials, in order to demonstrate their equivalence.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day