Fasteners - Button head screws with reduced loadability - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2022)

This document specifies the characteristics of hexagon socket button head screws with collar, with reduced loadability due to head design, in steel, with metric coarse pitch threads M3 to M16, and with product grade A.
If in certain cases other specifications are requested, dimensional options can be selected from ISO 888 or ISO 4753.
NOTE      The reduced loadability (related to the head dimensions in combination with penetration of the hexagon socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes, see Table 4.

Mechanische Verbindungselemente - Schrauben mit abgeflachtem Halbrundkopf mit reduzierter Belastbarkeit - Teil 2: Schrauben mit abgeflachtem Halbrundkopf mit Innensechskant und Bund (ISO 7380-2:2022)

Dieses Dokument legt die Eigenschaften von Schrauben mit abgeflachtem Halbrundkopf mit Innensechskant und Bund mit aufgrund der Auslegung des Kopfes reduzierter Belastbarkeit, aus Stahl, sowie metrischen Regelgewinden M3 bis M16 in Produktklasse A fest.
Falls in bestimmten Fällen andere Festlegungen benötigt werden, können Maßangaben aus ISO 888 oder ISO 4753 entnommen werden.
ANMERKUNG   Die reduzierte Belastbarkeit (bezogen auf die Kopfgeometrie in Kombination mit der in diesem Dokument festgelegten Eindringtiefe des Innensechskantes) bringt eine Begrenzung der Mindestbruchkraft mit sich, die durch eine spezifische Kennzeichnung (Festigkeitsklasse mit vorangestellter Null) angezeigt wird. Es wird angenommen, dass die Belastbarkeit im Kopf 80 % der Belastbarkeit im Gewinde für alle Größen und alle Festigkeitsklassen beträgt, siehe Tabelle 4.

Fixations - Vis à tête cylindrique bombée plate à capacité de charge réduite - Partie 2: Tête cylindrique bombée plate à six pans creux et embase plate (ISO 7380-2:2022)

Le présent document spécifie les caractéristiques des vis à tête cylindrique bombée plate à six pans creux et à embase plate, à capacité de charge réduite du fait de la conception de la tête, en acier, à filetage métrique à pas gros M3 à M16, et de grade A.
Si dans certains cas d’autres spécifications sont requises, les options dimensionnelles peuvent être choisies dans l'ISO 888 ou l'ISO 4753.
NOTE      La capacité de charge réduite (du fait des dimensions de la tête et de la profondeur de pénétration du six pans creux spécifiées dans le présent document) implique une limitation de la charge de rupture à la traction, indiquée par un marquage spécifique (classe de qualité précédée d’un zéro). La capacité de charge dans la tête est considérée comme égale à 80 % de la résistance du filetage pour toutes les dimensions et pour toutes les classes de qualité, voir Tableau 4.

Vezni elementi - Vijaki s sploščeno polkrožno glavo z manjšo obremenljivostjo - 2. del: Sploščena polkrožna glava z robom in notranjim šestkotnikom (ISO/FDIS 7380-2:2022)

General Information

Status
Published
Publication Date
10-Jan-2023
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
20-Jun-2023
Completion Date
11-Jan-2023

Relations

Buy Standard

Draft
prEN ISO 7380-2:2022
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 7380-2:2022
01-januar-2022

Vezni elementi - Vijaki s sploščeno polkrožno glavo z manjšo obremenljivostjo - 2.

del: Sploščena polkrožna glava z robom in notranjim šestkotnikom (ISO/DIS 7380-
2:2021)

Fasteners - Button head screws with reduced loadability - Part 2: Hexagon socket button

head screws with collar (ISO/DIS 7380-2:2021)
Mechanische Verbindungselemente - Schrauben mit abgeflachtem Halbrundkopf mit
reduzierter Belastbarkeit - Teil 2: Schrauben mit abgeflachtem Halbrundkopf mit
Innensechskant und Bund (ISO/DIS 7380-2:2021)

Fixations - Vis à tête cylindrique bombée plate à capacité de charge réduite - Partie 2:

Tête cylindrique bombée plate à six pans creux et embase plate (ISO/DIS 7380-2:2021)

Ta slovenski standard je istoveten z: prEN ISO 7380-2
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
oSIST prEN ISO 7380-2:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 7380-2:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 7380-2:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 7380-2
ISO/TC 2/SC 11 Secretariat: DIN
Voting begins on: Voting terminates on:
2021-11-15 2022-02-07
Fasteners — Button head screws with reduced
loadability —
Part 2:
Hexagon socket button head screws with collar
Partie 2: Tête cylindrique bombée plate à six pans creux à embase plate
ICS: 21.060.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 7380-2:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2021
---------------------- Page: 3 ----------------------
oSIST prEN ISO 7380-2:2022
ISO/DIS 7380-2:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on

the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below

or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
© ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 7380-2:2022
ISO/DIS 7380-2:2021(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ..................................................................................................................................................................................... 1

3 Terms and definition ....................................................................................................................................................................................... 1

4 Dimensions ................................................................................................................................................................................................................2

5 Requirements and reference International Standards .............................................................................................. 6

6 Marking and labelling .................................................................................................................................................................................... 7

6.1 Marking on product ........................................................................................................................................... ................................. 7

6.2 Labelling on package ......................................................................................................................................................................... 7

7 Designation ................................................................................................................................................................................................................ 7

Bibliography ................................................................................................................................................................................................................................ 9

iii
© ISO 2021 – All rights reserved
---------------------- Page: 5 ----------------------
oSIST prEN ISO 7380-2:2022
ISO/DIS 7380-2:2021(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to

the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see

www.iso.org/iso/foreword.html.

This document was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 11,

Fasteners with metric external thread.

This second edition cancels and replaces the first edition (ISO 7380-2:2011), which has been technically

revised.
The main changes compared to the previous edition are as follows:

— the whole standard including title has been improved to clearly point out that these hexagon socket

button head screws have reduced loadability because of their head design (head dimensions and

penetration of the hexagon socket);

— the reference thread length b has been increased to 3d for partially threaded screws M16 so that

these screws can be tensile tested in accordance with ISO 3506-1 (b ≥ 3d is required to tensile test

screws with reduced loadability);

— the reference datum for the outer diameter of the bearing face has been specified in accordance

with other relevant product standards (see Figure 1), and the minimum values have been reduced

to d = d × 0,9 considering the manufacturing aspects for “button head with collar”(see

w,min c,min
Table 1);
— e values have been rounded to two decimal places (see Table 1);
min
— the maximum depth of the hexagon socket t has been added (see Table 1);
max

— the definition of r in Figure 1 has been changed to allow the offset of the centre of the radius from

the thread axis;

— the smallest and greatest standardized nominal lengths have been amended (see Table 2);

— the minimum ultimate tensile loads were recalculated and have been changed to more precise

values M5, M12 and M16 with property class 8.8, and M3, M6 and M10 with property class 10.9 (see

Table 4);
© ISO 2021 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 7380-2:2022
ISO/DIS 7380-2:2021(E)
— a new Clause 6, Marking and labelling, has been added.
A list of all parts in the ISO 7380 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www.iso.org/members.html.
© ISO 2021 – All rights reserved
---------------------- Page: 7 ----------------------
oSIST prEN ISO 7380-2:2022
---------------------- Page: 8 ----------------------
oSIST prEN ISO 7380-2:2022
DRAFT INTERNATIONAL STANDARD ISO/DIS 7380-2:2021(E)
Fasteners — Button head screws with reduced
loadability —
Part 2:
Hexagon socket button head screws with collar
1 Scope

This document specifies the characteristics of hexagon socket button head screws with collar, with

reduced loadability, with metric coarse pitch threads M3 to M16, and with product grade A.

NOTE The reduced loadability (related to the head dimensions in combination with penetration of the

hexagon socket specified in this document) implies a limitation of ultimate tensile load. The loadability in the

head is assumed to be
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.