Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2010)

ISO 6581:2010 specifies a comparative method for the determination of the fastness of coloured anodic oxidation coatings to ultraviolet (UV) light and heat.
The method is not suitable for testing coloured anodic oxidation coatings that are heat sensitive.

Anodisieren von Aluminium und Aluminiumlegierungen - Vergleichsbestimmung der Beständigkeit von gefärbten, anodisch erzeugten Oxidschichten gegen ultraviolettes Licht und Wärme (ISO 6581:2010)

Diese Internationale Norm legt ein Vergleichsverfahren zur Bestimmung der Beständigkeit gefärbter, anodisch erzeugter Oxidschichten gegen ultraviolettes Licht und Wärme fest.
Das Verfahren ist nicht zur Prüfung gefärbter, anodisch erzeugter Oxidschichten, die sehr wärmeempfindlich sind, geeignet.
ANMERKUNG   Die höchste Temperatur erreichen üblicherweise dunkel gefärbte Proben.

Anodisation de l'aluminium et de ses alliages - Détermination de la solidité comparée à la lumière ultraviolette et à la chaleur des couches anodiques colorées (ISO 6581:2010)

L'ISO 6581:2010 spécifie une méthode de détermination par comparaison de la solidité à la lumière ultraviolette (U.V.) et à la chaleur des couches anodiques colorées.
La méthode d'essai n'est pas appropriée pour les couches anodiques colorées qui sont sensibles à la chaleur.

Anodizacija aluminija in aluminijevih zlitin - Primerjalno ugotavljanje obstojnosti barvnih anodnooksidiranih prevlek pri ultravijolični svetlobi in toploti (ISO 6581:2010)

Ta mednarodni standard določa primerjalno metodo za ugotavljanje obstojnosti barvnih anodno oksidiranih prevlek pri ultravijolični svetlobi in toploti. Metoda ni primerna za preskušanje barvnih anodno oksidiranih prevlek, ki so občutljive na toploto.

General Information

Status
Withdrawn
Publication Date
14-Jul-2010
Withdrawal Date
25-Sep-2018
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
26-Sep-2018

Relations

Buy Standard

Standard
EN ISO 6581:2010
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-2010
1DGRPHãþD
SIST EN 12373-8:1999
$QRGL]DFLMDDOXPLQLMDLQDOXPLQLMHYLK]OLWLQ3ULPHUMDOQRXJRWDYOMDQMHREVWRMQRVWL
EDUYQLKDQRGQRRNVLGLUDQLKSUHYOHNSULXOWUDYLMROLþQLVYHWORELLQWRSORWL ,62

Anodizing of aluminium and its alloys - Determination of the comparative fastness to
ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2010)
Anodisieren von Aluminium und Aluminiumlegierungen - Vergleichsbestimmung der
Beständigkeit von gefärbten, anodisch erzeugten Oxidschichten gegen ultraviolettes
Licht und Wärme (ISO 6581:2010)
Anodisation de l'aluminium et de ses alliages - Détermination de la solidité comparée à
la lumière ultraviolette et à la chaleur des couches anodiques colorées (ISO 6581:2010)
Ta slovenski standard je istoveten z: EN ISO 6581:2010
ICS:
25.220.20 Površinska obdelava Surface treatment
77.120.10 Aluminij in aluminijeve zlitine Aluminium and aluminium
alloys
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 6581
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2010
ICS 25.220.20 Supersedes EN 12373-8:1998
English Version
Anodizing of aluminium and its alloys - Determination of the
comparative fastness to ultraviolet light and heat of coloured
anodic oxidation coatings (ISO 6581:2010)
Anodisation de l'aluminium et de ses alliages - Anodisieren von Aluminium und Aluminiumlegierungen -
Détermination de la solidité comparée à la lumière Vergleichsbestimmung der Beständigkeit von gefärbten,
ultraviolette et à la chaleur des couches anodiques anodisch erzeugten Oxidschichten gegen ultraviolettes
colorées (ISO 6581:2010) Licht und Wärme (ISO 6581:2010)
This European Standard was approved by CEN on 23 June 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6581:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 6581:2010) has been prepared by Technical Committee ISO/TC 79 "Light metals and
their alloys" in collaboration with Technical Committee CEN/TC 132 “Aluminium and aluminium alloys” the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2011, and conflicting national standards shall be withdrawn at
the latest by January 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12373-8:1998.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 6581:2010 has been approved by CEN as a EN ISO 6581:2010 without any modification.

INTERNATIONAL ISO
STANDARD 6581
Second edition
2010-07-15
Anodizing of aluminium and its alloys —
Determination of the comparative
fastness to ultraviolet light and heat of
coloured anodic oxidation coatings
Anodisation de l'aluminium et de ses alliages — Détermination de la
solidité comparée à la lumière ultraviolette et à la chaleur des couches
anodiques colorées
Reference number
ISO 6581:2010(E)
©
ISO 2010
ISO 6581:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved

ISO 6581:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committe
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.