EN ISO 18771:2020

Anodizing of aluminium and its alloys - Method to test the surface abrasion resistance using glass-coated abrasive paper (ISO 18771:2019)

This document specifies a method for the determination of the surface abrasion resistance of anodic oxidation coatings produced by sulfuric acid anodizing of aluminium and its alloys. It is mainly intended for the evaluation of external architectural coatings. It is a production control method that relies to a large extent on operator experience and instruction.

Anodisieren von Aluminium und seinen Legierungen - Verfahren zur Prüfung der Oberflächenabriebfestigkeit mit glasbeschichtetem Schleifpapier (ISO 18771:2019)

Anodisation de l'aluminium et de ses alliages - Méthode de détermination de la résistance à l'usure d'une surface à l'aide de papier abrasif recouvert de verre (ISO 18771:2019)

Le présent document spécifie une méthode de détermination de la résistance à l'usure d'une couche d'oxydation anodique produite par anodisation à l'acide sulfurique de l'aluminium et de ses alliages. Il s'applique essentiellement à l'évaluation de couches architecturales externes. C'est une méthode de contrôle de production qui s'appuie largement sur l'expérience et les connaissances de l'opérateur.

Anodizacija aluminija in aluminijevih zlitin - Metoda preskušanja odpornosti proti obrabi površine z brusnim papirjem z nanosom stekla (ISO 18771:2019)

General Information

• Status: Published
• Publication Date: 15-Sep-2020
• Withdrawal Date: 30-Mar-2021
• ICS: 25.220.20 - Surface treatment
• Technical Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Drafting Committee: CEN/TC 132/WG 15 - Aluminium anodisation
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 16-Sep-2020
• Due Date: 11-Nov-2021
• Completion Date: 16-Sep-2020
• Ref Project: SIST EN ISO 18771:2020 - Anodizing of aluminium and its alloys - Method to test the surface abrasion resistance using glass-coated abrasive paper (ISO 18771:2019)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 18771:2020
01-november-2020
Anodizacija aluminija in aluminijevih zlitin - Metoda preskušanja odpornosti proti
obrabi površine z brusnim papirjem z nanosom stekla (ISO 18771:2019)
Anodizing of aluminium and its alloys - Method to test the surface abrasion resistance
using glass-coated abrasive paper (ISO 18771:2019)
Anodisieren von Aluminium und seinen Legierungen - Verfahren zur Prüfung der
Oberflächenabriebfestigkeit mit glasbeschichtetem Schleifpapier (ISO 18771:2019)
Ta slovenski standard je istoveten z: EN ISO 18771:2020
ICS:
25.220.20 Površinska obdelava Surface treatment
77.120.10 Aluminij in aluminijeve zlitine Aluminium and aluminium
alloys
SIST EN ISO 18771:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 18771:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 18771:2020


EN ISO 18771
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2020
EUROPÄISCHE NORM
ICS 25.220.20
English Version

Anodizing of aluminium and its alloys - Method to test the
surface abrasion resistance using glass-coated abrasive
paper (ISO 18771:2019)
 Anodisieren von Aluminium und seinen Legierungen -
Verfahren zur Prüfung der Oberflächenabriebfestigkeit
mit glasbeschichtetem Schleifpapier (ISO 18771:2019)
This European Standard was approved by CEN on 24 August 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18771:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 18771:2020
EN ISO 18771:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 18771:2020
EN ISO 18771:2020 (E)
European foreword
The text of ISO 18771:2019 has been prepared by Technical Committee ISO/TC 79 "Light metals and
their alloys” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 18771:2020 by Technical Committee CEN/TC 132 “Aluminium and aluminium alloys” the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2021, and conflicting national standards shall
be withdrawn at the latest by March 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 18771:2019 has been approved by CEN as EN ISO 18771:2020 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 18771:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 18771:2020
INTERNATIONAL ISO
STANDARD 18771
First edition
2019-02
Anodizing of aluminium and its
allo
...