EN 2003-009:2007
(Main)Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination
Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination
This standard specifies two methods of determining surface contamination caused by an a-stabilizer on titanium and titanium alloys, for aerospace applications.
Luft- und Raumfahrt - Prüfverfahren - Titan und Titanlegierungen - Teil 009: Bestimmung der Oberflächenverunreinigung
Diese Norm legt zwei Verfahren zur Bestimmung der Oberflächenverunreinigung, verursacht durch einen α Stabilisator auf Titan und Titanlegierungen, für die Luft- und Raumfahrt, fest.
Série aérospatiale - Méthodes d'essais - Titane et alliages de titane - Partie 009 : Détermination de la contamination de surface
Aeronavtika - Preskusne metode - Titan in titanove zlitine - 009. del: Določanje kontaminacije površin
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Prüfverfahren - Titan und Titanlegierungen - Teil 009: Bestimmung der OberflächenverunreinigungSérie aérospatiale - Méthodes d'essais - Titane et alliages de titane - Partie 009 : Détermination de la contamination de surfaceAerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination49.025.30TitanTitaniumICS:Ta slovenski standard je istoveten z:EN 2003-009:2007SIST EN 2003-009:2009en,de01-maj-2009SIST EN 2003-009:2009SLOVENSKI
STANDARD
SIST EN 2003-009:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2003-009March 2007ICS 49.025.30 English VersionAerospace series - Test methods - Titanium and titanium alloys -Part 009: Determination of surface contaminationSérie aérospatiale - Méthodes d'essais - Titane et alliagesde titane - Partie 009 : Détermination de la contaminationde surfaceLuft- und Raumfahrt - Prüfverfahren - Titan undTitanlegierungen - Teil 009: Bestimmung derOberflächenverunreinigungThis European Standard was approved by CEN on 5 October 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2003-009:2007: ESIST EN 2003-009:2009
EN 2003-009:2007 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.4 5 Micrographic examination (Method A).5 6 Hardness testing (Method B).5 7 Test report.6 Annex A (informative)
Examples of contamination.7
SIST EN 2003-009:2009
EN 2003-009:2007 (E) 3 Foreword This document (EN 2003-009:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2007, and conflicting national standards shall be withdrawn at the latest by September 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the nati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.