EN ISO 12677:2003

Chemical analysis of refractory products by XRF - Fused cast bead method (ISO 12677:2003)

ISO 12677:2003 specifies a method for chemical analysis of refractory products and materials, and technical ceramics composed of oxides, including the determination of oxide at levels between 0,01 % and 99 % by means of the XRF fused cast bead method.

Chemische Analyse von feuerfesten Erzeugnissen durch Röntgenflureßenz - Schmelzaufschluss-Verfahren (ISO 12677:2003)

Diese Internationale Norm legt ein Verfahren zur chemischen Analyse von feuerfesten Erzeugnissen und Werkstoffen sowie oxidischer technischer Keramik fest und schließt die Bestimmung von Massenanteilen an Oxiden zwischen 0,01 % und 99 % durch die Röntgenfluoreszenzanalyse (RFA) an Schmelzaufschlüssen ein.
ANMERKUNG   Bestandteile mit Massenanteilen größer als 99 % (bezogen auf die getrocknete Substanz) sollten als Differenz angegeben werden, vorausgesetzt, alle wahrscheinlichen Nebenbestandteile und die Massenänderung durch Glühen wurden ermittelt. Auch diese Angaben sollten durch direkte Bestimmungen geprüft werden.

Analyse chimique des matériaux réfractaires par fluorescence de rayons X - Méthode de la perle fondue (ISO 12677:2003)

L'ISO 12677:2004 décrit une méthode d'analyse chimique des matériaux et des produits réfractaires, ainsi que des céramiques techniques, composés d'oxydes, et comprend la détermination d'oxydes à des concentrations comprises entre 0,01 % et 99 % par fluorescence de rayons X (méthode de la perle fondue).

Kemijska analiza ognjevzdržnih izdelkov z XRF – Metoda z vlito talino (ISO 12677:2003)

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-2003
• Withdrawal Date: 30-Sep-2011
• ICS: 81.080 - Refractories
• Technical Committee: CEN/TC 187 - Refractory products and materials
• Drafting Committee: CEN/TC 187/WG 4 - Chemical analysis
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Oct-2011
• Completion Date: 01-Oct-2011
• Ref Project: SIST EN ISO 12677:2003 - Chemical analysis of refractory products by XRF - Fused cast bead method (ISO 12677:2003)

Relations

• Replaced By: EN ISO 12677:2011 - Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method (ISO 12677:2011)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2003
Kemijska analiza ognjevzdržnih izdelkov z XRF – Metoda z vlito talino (ISO
12677:2003)
Chemical analysis of refractory products by XRF - Fused cast bead method (ISO
12677:2003)
Chemische Analyse von feuerfesten Erzeugnissen durch Röntgenflureßenz -
Schmelzaufschluss-Verfahren (ISO 12677:2003)
Analyse chimique des matériaux réfractaires par fluorescence de rayons X - Méthode de
la perle fondue (ISO 12677:2003)
Ta slovenski standard je istoveten z: EN ISO 12677:2003
ICS:
81.080 Ognjevzdržni materiali Refractories
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 12677
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2003
ICS 81.080
English version
Chemical analysis of refractory products by XRF - Fused cast
bead method (ISO 12677:2003)
Analyse chimique des matériaux réfractaires par Chemische Analyse von feuerfesten Erzeugnissen durch
fluorescence de rayons X - Méthode de la perle fondue Röntgenflureszenz - Schmelzaufschluss-Verfahren (ISO
(ISO 12677:2003) 12677:2003)
This European Standard was approved by CEN on 16 April 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12677:2003 E
worldwide for CEN national Members.

CORRECTED  2003-07-02
Foreword
This document (EN ISO 12677:2003) has been prepared by Technical Committee ISO/TC 33
"Refractories" in collaboration with Technical Committee CEN/TC 187 "Refractory products and
materials", the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by November 2003, and conflicting national
standards shall be withdrawn at the latest by November 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 12677:2003 has been approved by CEN as EN ISO 12677:2003 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 10058 1992 Magnesites and dolomites - Chemical EN ISO 10058 1996
analysis
INTERNATIONAL ISO
STANDARD 12677
First edition
2003-05-01
Chemical analysis of refractory products
by XRF — Fused cast bead method
Analyse chimique des matériaux réfractaires par fluorescence de
rayons X — Méthode de la perle fondue

Reference number
ISO 12677:2003(E)
©
ISO 2003
ISO 12677:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2003 — All rights reserved

ISO 12677:2003(E)
Contents Page
Foreword. iv
1 Scope. 1
2 Normative references. 1
3 Types of material. 1
4 Principle. 2
5 Sample grinding. 2
6 Apparatus. 3
7 Loss on ignition (and/or drying). 3
8 Flux. 4
9 Fusion casting procedures . 5
10 Calibration. 8
11 Corrections. 16
12 Reproducibility and repeatability. 19
13 Accuracy as measured using certified reference materials. 21
14 Definitions of limits of detection . 22
15 Test report. 22
Annex A (normative) Calibration range and required detection limits . 24
Annex B (normative) Corrections for tungsten carbide grinding media . 28
Annex C (informative) Examples of fluxes/flux ratios . 30
Annex D (normative) Examples of CRM to be used to check synthetic calibrations. 32
Annex E (normative) Examples of SeRM . 37
Annex F (normative) Equation for theoretical calculations . 42
Annex G (normative) Certified reference materials (CRMs). 43
Annex H (normative) Method of interference correction used to compensate for the effects of
co-existing components when using SeRM for calibration. 46
Annex I (informative) Standard deviations achieved with certified reference materials . 71
Bibliography . 74

ISO 12677:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12677 was prepared by Technical Committee ISO/TC 33, Refractories.

iv © ISO 2003 — All rights reserved

INTERNATIONAL STANDARD ISO 12677:2003(E)

Chemical analysis of refractory products by XRF — Fused cast
bead method
1 Scope
This International Standard specifies a method for chemical analysis of refractory products and materials, and
technical ceramics composed of oxides, including the determination of oxide at levels between 0,01 % and
99 % by means of the XRF fused cast bead method.
NOTE Constituents at concentrations greater than 99 % (on a dried basis) should be reported on by difference,
provided that all likely minor constituents and any loss on ignition have been determined. These figures should also be
checked by direct determination.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO Guide 34:2000, General requirements for the competence of reference material producers
ISO 565, Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of
openings
ISO 10058, Magnesites and dolomites — Chemical analysis
ISO/IEC Directives (1992) — Part 2: Methodology for the development of International Standards — Annex B
Mention of reference materials
EN 955-2, Chemical analysis of refractory products — Part 2: Products containing silica and/or alumina (wet
method)
3 Types of material
High alumina W 45 % Al O
2 3
Alumino-silicate 7 % to 45 % Al O
2 3
Silica W 93 % SiO
Zircon
Zirconia and zirconates
Magnesia
Magnesia/alumina spinel (∼ 70/30)
ISO 12677:2003(E)
Dolomite
Limestone
Magnesia/chromic oxide
Chrome ore
Chrome alumina
Alumina/magnesia spinel (∼ 70/30)
Zirconia-alumina-silica cast material (AZS)
Calcium silicates
Calcium aluminates
Magnesium silicates
A list of elemental ranges and required detection limits are given in Annex A. Some of the above material
types can be accommodated on to common calibrations (see 10.3.4).
4 Principle
The powdered sample is fused with a suitable flux to destroy its mineralogical and particulate composition.
The resultant melt is cast into the shape of a glass bead which is then introduced into an XRF spectrometer.
The intensities of the fluorescent X-rays of the required elements in the bead are measured and the chemical
composition of the sample is analysed by reference to previously determined calibration graphs or e
...