EN ISO 6360-5:2007

Dentistry - Number coding system for rotary instruments - Part 5: Specific characteristics of root-canal instruments (ISO 6360-5:2007)

ISO 6360-5:2007 specifies the code numbers for specific characteristics of root-canal instruments. This three digit number appears in the locations 10 to 12 of the 15-digit overall number and forms the fourth group of three digits in the 15-digit overall number, the principles of which are explained in ISO 6360-1 and ISO 6360-2.

Zahnheilkunde - Nummernsystem für rotierende Instrumente - Teil 5: Besondere Eigenschaften von Wurzelkanalinstrumenten (ISO 6360-5:2007)

Dieser Teil von ISO 6360 legt Kennzahlen für besondere Eigenschaften von Wurzelkanal¬instrumenten fest. Diese dreistellige Nummer erscheint an den Stellen 10 bis 12 der 15-stelligen Gesamtnummer und bildet die vierte Gruppe mit drei Zahlen in der 15-stelligen Gesamtnummer, deren Grundsätze in ISO 6360-1 und ISO 6360 2 beschrieben werden.

Art dentaire - Système de codification numérique pour instruments rotatifs - Partie 5: Caractéristiques spécifiques des instruments pour canaux radiculaires (ISO 6360-5:2007)

L'ISO 6360-5:2007 spécifie les codes pour les caractéristiques spécifiques des instruments pour canaux radiculaires. Ce nombre à trois chiffres apparaît en position 10 à 12 de l'identifiant à 15 chiffres et constitue le quatrième groupe de trois chiffres de cet identifiant, dont les principes sont expliqués dans l'ISO 6360-1 et dans l'ISO 6360-2.

Zobozdravstvo - Sistem številčnega kodiranja vrtilnih instrumentov - 5. del: Posebne lastnosti instrumentov za zobni kanal (ISO 6360-5:2007)

General Information

• Status: Published
• Publication Date: 30-Nov-2007
• Withdrawal Date: 29-Jun-2008
• ICS: 11.060.25 - Dental instruments
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Dec-2007
• Completion Date: 01-Dec-2007
• Ref Project: SIST EN ISO 6360-5:2008 - Dentistry - Number coding system for rotary instruments - Part 5: Specific characteristics of root-canal instruments (ISO 6360-5:2007)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6360-5:2008
01-april-2008
=RER]GUDYVWYR6LVWHPãWHYLOþQHJDNRGLUDQMDYUWLOQLKLQVWUXPHQWRYGHO
3RVHEQHODVWQRVWLLQVWUXPHQWRY]D]REQLNDQDO,62
Dentistry - Number coding system for rotary instruments - Part 5: Specific characteristics
of root-canal instruments (ISO 6360-5:2007)
Zahnheilkunde - Nummernsystem für rotierende Instrumente - Teil 5: Besondere
Eigenschaften von Wurzelkanalinstrumenten (ISO 6360-5:2007)
Art dentaire - Systeme de codification numérique pour instruments rotatifs - Partie 5:
Caractéristiques spécifiques des instruments pour canaux radiculaires (ISO 6360-
5:2007)
Ta slovenski standard je istoveten z: EN ISO 6360-5:2007
ICS:
11.060.25 =RERWHKQLþQLLQVWUXPHQWL Dental instruments
35.040 Nabori znakov in kodiranje Character sets and
informacij information coding
SIST EN ISO 6360-5:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 6360-5:2008

---------------------- Page: 2 ----------------------

SIST EN ISO 6360-5:2008
EUROPEAN STANDARD
EN ISO 6360-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2007
ICS 11.060.25

English Version
Dentistry - Number coding system for rotary instruments - Part 5:
Specific characteristics of root-canal instruments (ISO 6360-
5:2007)
Art dentaire - Système de codification numérique pour Zahnheilkunde - Nummernsystem für rotierende
instruments rotatifs - Partie 5: Caractéristiques spécifiques Instrumente - Teil 5: Besondere Eigenschaften von
des instruments pour canaux radiculaires (ISO 6360- Wurzelkanalinstrumenten (ISO 6360-5:2007)
5:2007)
This European Standard was approved by CEN on 7 November 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6360-5:2007: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 6360-5:2008
EN ISO 6360-5:2007 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 6360-5:2008
EN ISO 6360-5:2007 (E)
Foreword
This document (EN ISO 6360-5:2007) has been prepared by Technical Committee ISO/TC 106 "Dentistry" in
collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2008, and conflicting national standards shall be withdrawn at
the latest by June 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 6360-5:2007 has been approved by CEN as a EN ISO 6360-5:2007 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 6360-5:2008

---------------------- Page: 6 ----------------------

SIST EN ISO 6360-5:2008

INTERNATIONAL ISO
STANDARD 6360-5
First edition
2007-12-01

Dentistry — Number co
...