EN ISO 11073-10425:2019
(Main)Health informatics - Personal health device communication - Part 10425: Device specialization - Continuous glucose monitor (CGM) (ISO/IEEE 11073-10425:2019)
Health informatics - Personal health device communication - Part 10425: Device specialization - Continuous glucose monitor (CGM) (ISO/IEEE 11073-10425:2019)
This standard establishes a normative definition of communication between personal health continuous glucose monitor (CGM) devices (agents) and managers (e.g., cell phones, personal computers, personal health appliances, set top boxes) in a manner that enables plug-and-play interoperability. It leverages work done in other ISO/IEEE 11073 standards including existing terminology, information profiles, application profile standards, and transport standards. It specifies the use of specific term codes, formats, and behaviors in telehealth environments, restricting optionality in base frameworks in favor of interoperability. This standard defines a common core of communication functionality of CGM devices. In this context, CGM refers to the measurement of the level of glucose in the body on a regular (typically 5 minute) basis through a sensor continuously attached to the person.
Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit - Teil 10425: Gerätespezifikation - Kontinuierlicher Glukose-Monitor (ISO/IEEE 11073-10425:2019)
Informatique de santé - Communication entre dispositifs de santé personnels - Partie 10425: Spécialisation du dispositif - Glucomètre continu (CGM) (ISO/IEEE 11073-10425:2019)
La présente norme établit une définition normative de la communication entre des dispositifs de santé personnels (agents) du type glucomètre continu (CGM) et des gestionnaires (par exemple, téléphones cellulaires, ordinateurs personnels, équipements de santé personnels et boîtiers décodeurs) d'une manière qui permet une interopérabilité du type prêt à l'emploi. Elle s'appuie sur le travail réalisé dans d'autres normes ISO/IEEE 11073, notamment la terminologie, les modèles d'informations, les normes de profils d'applications et les normes de transport. Elle spécifie l'utilisation de codes, de formats et de comportements liés à des termes spécifiques dans les environnements de télésanté, en limitant les choix à des cadres de travail de base favorisant l'interopérabilité. La présente norme définit un noyau commun de fonctionnalités de communication pour les dispositifs CGM. Dans ce contexte, CGM désigne la mesure régulière du niveau de glucose dans l'organisme (généralement toutes les 5 minutes) par le biais d'une sonde fixée en permanence sur la personne.
Zdravstvena informatika - Komunikacija osebnih medicinskih naprav - 10425. del: Specialne naprave - Stalno spremljanje ravni glukoze (ISO/IEEE 11073-10425:2019)
Ta standard določa normativno opredelitev komunikacije med osebnimi medicinskimi pripomočki za stalno spremljanje ravni glukoze (agenti) in upravljalnimi napravami (npr. mobilnimi telefoni, osebnimi računalniki, osebnimi medicinskimi pripomočki, digitalnimi sprejemniki) na način, ki omogoča interoperabilnost s takojšnjim učinkom (»vstavi in poženi«). Standard temelji na delu, doseženem v drugih standardih ISO/IEEE 11073, vključno z obstoječo terminologijo, informacijskimi profili, standardi za profile aplikacije in standardi za prevoz. Določa uporabo posebnih kod izrazov, formatov in vedenj v telemedicinskih okoljih, kjer v korist interoperabilnosti omejuje izbirnost osnovnih okvirov. Ta standard določa skupno jedro komunikacijske funkcionalnosti za naprave za stalno spremljanje ravni glukoze. V tem kontekstu se stalno spremljanje ravni glukoze navezuje na redno merjenje ravni glukoze v telesu (običajno na 5 minut) s senzorjem, ki je stalno pritrjen na osebo.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2019
Nadomešča:
SIST EN ISO 11073-10425:2017
Zdravstvena informatika - Komunikacija osebnih medicinskih naprav - 10425. del:
Specialne naprave - Stalno spremljanje ravni glukoze (ISO/IEEE 11073-10425:2019)
Health informatics - Personal health device communication - Part 10425: Device
specialization - Continuous glucose monitor (CGM) (ISO/IEEE 11073-10425:2019)
Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit -
Teil 10425: Gerätespezifikation - Kontinuierlicher Glukose-Monitor (ISO/IEEE 11073-
10425:2019)
Informatique de santé - Communication entre dispositifs de santé personnels - Partie
10425: Spécialisation du dispositif - Glucomètre continu (CGM) (ISO/IEEE 11073-
10425:2019)
Ta slovenski standard je istoveten z: EN ISO 11073-10425:2019
ICS:
11.040.55 Diagnostična oprema Diagnostic equipment
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 11073-10425
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2019
EUROPÄISCHE NORM
ICS 35.240.80 Supersedes EN ISO 11073-10425:2016
English Version
Health informatics - Personal health device
communication - Part 10425: Device specialization -
Continuous glucose monitor (CGM) (ISO/IEEE 11073-
10425:2019)
Informatique de santé - Communication entre Medizinische Informatik - Kommunikation von Geräten
dispositifs de santé personnels - Partie 10425: für die persönliche Gesundheit - Teil 10425:
Spécialisation du dispositif - Glucomètre continu Gerätespezifikation - Kontinuierlicher Glukose-Monitor
(CGM) (ISO/IEEE 11073-10425:2019) (ISO/IEEE 11073-10425:2019)
This European Standard was approved by CEN on 22 February 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11073-10425:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 11073-10425:2019) has been prepared by Technical Committee ISO/TC 215
"Health informatics" in collaboration with Technical Committee CEN/TC 251 “Health informatics” the
secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2019, and conflicting national standards shall
be withdrawn at the latest by October 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11073-10425:2016.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO/IEEE 11073-10425:2019 has been approved by CEN as EN ISO 11073-10425:2019
without any modification.
INTERNATIONAL ISO/IEEE
STANDARD 11073-10425
Second edition
2019-03
Health informatics — Personal health
device communication —
Part 10425:
Device specialization — Continuous
glucose monitor (CGM)
Informatique de santé — Communication entre dispositifs de santé
personnels —
Partie 10425: Spécialisation du dispositif — Glucomètre continu (CGM)
Reference number
ISO/IEEE 11073-10425:2019(E)
©
IEEE 2018
ISO/IEEE 11073-10425:2019(E)
© IEEE 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
Institute of Electrical and Electronics Engineers, Inc
3 Park Avenue, New York
NY 10016-5997, USA
Email: stds.ipr@ieee.org
Published in Switzerland
ii © IEEE 2018 – All rights reserved
ISO/IEEE 11073-10425:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national
standards bodies (ISO member bodies). The work of preparing International Standards is normally
carried out through ISO technical committees. Each member body interested in a subject for which a
technical committee has been established has the right to be represented on that committee.
International organizations, governmental and non‐governmental, in liaison with ISO, also take part
in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for
the different types of ISO documents should be noted (see www.iso.org/directives).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE‐SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve
the final product. Volunteers are not necessarily members of the Institute and serve without
compensation. While the IEEE administers the process and establishes rules to promote fairness in
the consensus development process, the IEEE does not independently evaluate, test, or verify the
accuracy of any of the information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details
of any patent rights identified during the development of the document will be in the Introduction
and/or on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does
not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT),
see www.iso.org/iso/foreword.html.
ISO/IEEE 11073‐10425 was prepared by the IEEE 11073 Standards Committee of the IEEE
Engineering in Medicine and Biology Society (as IEEE Std 11073‐10425‐2017) and drafted in
accordance with its editorial rules. It was adopted, under the “fast‐track procedure” defined in the
Partner Standards Development Organization cooperation agreement between ISO and IEEE, by
Technical Committee ISO/TC 215, Health informatics.
This second edition cancels and replaces the first edition (ISO/IEEE 11073‐10425:2016), which has
been technically revised.
A list of all parts in the ISO 11073 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards
body. A complete listing of these bodies can be found at www.iso.org/members.html.
© IEEE 2018– All rights reserved iii
ISO/IEEE 11073-10425:2019(E)
Abstract: Within the context of the ISO/IEEE 11073 family of standards for device
communication, a normative definition of the communication between continuous glucose monitor
(CGM) devices and managers (e.g., cell phones, personal computers, personal health appliances,
set top boxes), in a manner that enables plug-and-play interoperability, is established in this
standard. It leverages appropriate portions of existing standards including ISO/IEEE 11073
terminology and information models. It specifies the use of specific term codes, formats, and
behaviors in telehealth environments, restricting optionality in base frameworks in favor of
interoperability. This standard defines a common core of communication functionality of CGM
devices. In this context, CGM refers to the measurement of the level of glucose in the body on a
regular (typically 5 minute) basis through a sensor continuously attached to the person.
Keywords: continuous glucose monitor, IEEE 11073-10425™, medical device communication,
personal health devices
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
All rights reserved. Published 25 January 2018. Printed in the United States of America.
IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics Engineers,
Incorporated.
PDF: ISBN 978-1-5044-4293-0 STD22759
Print: ISBN 978-1-5044-4294-7 STDPD22759
IEEE prohibits discrimination, harassment, and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
ISO/IEEE 11073-10425:2019(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These
notices and disclaimers, or a reference to this page, appear in all standards and may be found under the
heading “Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be
obtained on request from IEEE or viewed at http://standards.ieee.org/IPR/disclaimers.html.
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards
Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a
consensus development process, approved by the American National Standards Institute (“ANSI”), which
brings together volunteers representing varied viewpoints and interests to achieve the final product. IEEE
Standards are documents developed through scientific, academic, and industry-based technical working
groups. Volunteers in IEEE working groups are not necessarily members of the Institute and participate
without compensation from IEEE. While IEEE administers the process and establishes rules to promote
fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the
accuracy of any of the information or the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure
against interference with or from other devices or networks. Implementers and users of IEEE Standards
documents are responsible for determining and complying with all appropriate safety, security,
environmental, health, and interference protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and
expressly disclaims all warranties (express, implied and statutory) not included in this or any other
document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness
for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness
of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.
IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.