FprEN 915

Gymnastic equipment - Asymmetric bars - Requirements and test methods including safety

This document specifies functional requirements (see Clause 4) and specific safety requirements in addition to the general safety requirements in EN 913:2018+A1:2021 (see Clause 5).
This document is applicable to 2 types of asymmetric bars (see Table 1) intended for use under supervision of a competent person.

Turngeräte - Stufenbarren - Anforderungen und Prüfverfahren einschließlich Sicherheit

Dieses Dokument legt funktionelle Anforderungen (siehe Abschnitt 4) und spezifische sicherheitstechnische Anforderungen zusätzlich zu den allgemeinen Sicherheitsanforderungen in EN 913:2018+A1:2021 (siehe Abschnitt 5) fest.
Dieses Dokument ist anwendbar für zwei Typen von Stufenbarren (siehe Tabelle 1), die für die Verwendung unter Aufsicht einer sachkundigen Person vorgesehen sind.

Matériel de gymnastique - Barres asymétriques - Exigences et méthodes d'essai y compris de sécurité

Le présent document spécifie les exigences de fonctionnement (voir l’Article 4) et les exigences spécifiques de sécurité qui s’ajoutent aux exigences générales de sécurité énoncées dans l’EN 913:2018+A1:2021 (voir l’Article 5).
Le présent document s’applique aux 2 types de barres asymétriques (voir Tableau 1) destinés à être utilisés sous la surveillance d’une personne compétente.

Gimnastična oprema - Dvovišinska bradlja - Zahteve in preskusne metode, vključno z varnostjo

General Information

• Status: Not Published
• Publication Date: 03-Jul-2024
• ICS: 97.220.30 - Indoor sports equipment
• Technical Committee: CEN/TC 136 - Sports, playground and other recreational equipment
• Drafting Committee: CEN/TC 136/WG 22 - Gymnastic and playing field equipment
• Current Stage: 5020 - Submission to Vote - Formal Approval
• Start Date: 14-Mar-2024
• Due Date: 24-Feb-2023
• Completion Date: 14-Mar-2024
• Directive: 2001/95/EC - Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety
• Directive: 92/59/EEC - General product safety
• Mandate: M/507 - Standardisation mandate issued to the European standardisation organisations (ESOs) to develop European standards for gymnastic equipment
• Ref Project: oSIST prEN 915:2023 - Gymnastic equipment - Asymmetric bars - Requirements and test methods including safety

Relations

• Revises: EN 915:2008 - Gymnastic equipment - Asymmetric bars - Requirements and test methods including safety
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 915:2023
01-april-2023
Nadomešča:
SIST EN 915:2009
Gimnastična oprema - Dvovišinska bradlja - Zahteve in preskusne metode,
vključno z varnostjo
Gymnastic equipment - Asymmetric bars - Requirements and test methods including
safety
Turngeräte - Stufenbarren - Anforderungen und Prüfverfahren einschließlich Sicherheit
Matériel de gymnastique - Barres asymétriques - Exigences et méthodes d'essai y
compris de sécurité
Ta slovenski standard je istoveten z: prEN 915
ICS:
97.220.30 Oprema za dvoranske športe Indoor sports equipment
oSIST prEN 915:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 915:2023

---------------------- Page: 2 ----------------------
oSIST prEN 915:2023


DRAFT
EUROPEAN STANDARD
prEN 915
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2023
ICS Will supersede EN 915:2008
English Version

Gymnastic equipment - Asymmetric bars - Requirements
and test methods including safety
Matériel de gymnastique - Barres asymétriques - Turngeräte - Stufenbarren - Anforderungen und
Exigences et méthodes d'essai y compris de sécurité Prüfverfahren einschließlich Sicherheit
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 136.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 915:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 915:2023
prEN 915:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 4
4.1 Classification. 4
4.2 Dimensions. 4
5 Safety Requirements . 6
5.1 General requirements . 6
5.2 Entrapment . 6
5.3 Stability .
...