EN 4057-401:2006
(Main)Aerospace series - Cable ties for harnesses - Test methods - Part 401: Loop tensile strength
Aerospace series - Cable ties for harnesses - Test methods - Part 401: Loop tensile strength
This standard specifies the procedure to determine the force to failure of cable ties for harnesses for aero-space applications.
It shall be used together with EN 4057 100.
Luft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Prüfverfahren - Teil 401: Abbindefestigkeit
Diese Norm legt das Verfahren zur Ermittlung der Kraft bis zum Versagen von Befestigungsbändern für Leitungsbündel für Anwendungen in der Luft und Raumfahrt fest.
Sie ist in Verbindung mit EN 4057 100 anzuwenden.
Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 401 : Résistance à la rupture de la boucle
Aeronavtika - Kabelske spojke za vezalno pasovje - Preskusne metode - 401. del: Natezna trdnost zanke
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2009
Aeronavtika - Kabelske spojke za vezalno pasovje - Preskusne metode - 401. del:
Natezna trdnost zanke
Aerospace series - Cable ties for harnesses - Test methods - Part 401: Loop tensile
strength
Luft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Prüfverfahren - Teil 401:
Abbindefestigkeit
Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 401 :
Résistance à la rupture de la boucle
Ta slovenski standard je istoveten z: EN 4057-401:2006
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 4057-401
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2006
ICS 49.060
English Version
Aerospace series - Cable ties for harnesses - Test methods -
Part 401: Loop tensile strength
Série aérospatiale - Frettes de câblage pour harnais - Luft- und Raumfahrt - Befestigungsbänder für
Méthodes d'essais - Partie 401 : Résistance à la rupture de Leitungsbündel - Prüfverfahren - Teil 401: Abbindefestigkeit
la boucle
This European Standard was approved by CEN on 28 October 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4057-401:2006: E
worldwide for CEN national Members.
Contents Page
Foreword.3
1 Scope.4
2 Normative references.4
3 Apparatus.4
4 Procedure.5
5 Requirements.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.