prEN 16612
(Main)Glass in building - Determination of the load resistance of glass panes by calculation and testing
Glass in building - Determination of the load resistance of glass panes by calculation and testing
This European Standard gives the principles of determining the load resistance of glass. It gives
- the general method of calculation, and
- determination of load resistance by testing for any application.
This European Standard does not determine suitability for purpose. Resistance to applied loads is only one part of the design process, which may also need to take into account
- environmental factors (e.g. sound insulation, thermal properties),
- safety characteristics (e.g. fire performance, breakage characteristics in relation to human safety, security).
Glas im Bauwesen - Bestimmung des Belastungswiderstandes von Glasscheiben durch Berechnung und Prüfung
Diese Europäische Norm legt die Grundsätze zur Bestimmung des Belastungswiderstands von Glas fest. Sie legt Folgendes fest:
- allgemeine Berechnungsverfahren; und
- Bestimmung des Belastungswiderstands jeder Anwendung durch Prüfung.
Diese Europäische Norm legt nicht die Gebrauchstauglichkeit fest. Der Widerstand gegenüber der aufgebrachten Last ist nur ein Teil des Entwurfsprozesses, bei dem auch Folgendes berücksichtigt werden muss:
- umgebungsbezogene Faktoren (z. B. Schalldämmung, thermische Eigenschaften);
- Sicherheitsmerkmale (z. B. Brandverhalten, Bruchverhalten in Bezug auf den Schutz von Personen, Sicherheit).
Verre dans la construction - Détermination de la résistance de vitres par calcul et par essai
La présente Norme européenne donne les principes de détermination de la résistance du verre à une charge. Elle donne :
• la méthode générale de calcul et
• la détermination de la résistance à une charge par des essais pour toute application.
La présente Norme européenne ne préjuge pas de l’aptitude à l’emploi. La résistance à des charges appliquées n'est qu'une partie du processus de conception, qui peut également prendre en compte :
• les facteurs environnementaux (par exemple, les propriétés thermiques),
• les caractéristiques de sécurité (par exemple, des caractéristiques de rupture vis-à-vis de la sécurité des personnes, de la sécurité).
Steklo v gradbeništvu - Ugotavljanje odpornosti steklenih plošč proti obremenitvi z izračunom in preskušanjem
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 16612:2013
01-september-2013
6WHNORYJUDGEHQLãWYX8JRWDYOMDQMHRGSRUQRVWLVWHNOHQLKSORãþSURWLREUHPHQLWYL
]L]UDþXQRPLQSUHVNXãDQMHP
Glass in building - Determination of the load resistance of glass panes by calculation and
testing
Glas im Bauwesen - Bestimmung des Belastungswiderstandes von Glasscheiben durch
Berechnung und Prüfung
Verre dans la construction - Détermination de la résistance des feuilles de verre par
calcul et par essai
Ta slovenski standard je istoveten z: prEN 16612
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
oSIST prEN 16612:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 16612:2013
---------------------- Page: 2 ----------------------
oSIST prEN 16612:2013
EUROPEAN STANDARD
DRAFT
prEN 16612
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2013
ICS 81.040.20
English Version
Glass in building - Determination of the load resistance of glass
panes by calculation and testing
Verre dans la construction - Détermination de la résistance Glas im Bauwesen - Bestimmung des
des feuilles de verre par calcul et par essai Belastungswiderstandes von Glasscheiben durch
Berechnung und Prüfung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 129.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16612:2013: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 16612:2013
prEN 16612:2013 (E)
Contents Page
Foreword .4
Introduction .5
1 Scope .6
2 Normative references .6
3 Terms and definitions .7
4 Symbols and abbreviations .9
5 Requirements . 14
5.1 Basis of determination of load resistance of glass . 14
5.2 General requirements . 15
5.3 Material partial factor . 15
5.4 Process of determining the load resistance of glass . 15
6 Mechanical and physical properties of glass .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.