EN 16907-3:2018
(Main)Earthworks - Part 3: Construction procedures
Earthworks - Part 3: Construction procedures
This European Standard provides execution procedures for excavating, transporting and placing soils and rocks for the construction of earth-structures and guidance for the work. Additionally, it includes excavation and placement of rock materials underwater.
Dredging of soils and the associated hydraulic placement of fills are covered by EN 16907-6 and EN 16907-7.
Execution of earthworks follows the conclusions of the earthworks design and optimization phase (EN 16907-1), which should anticipate soil and rock specificities and their suitability. In case some events could not be foreseen, additional design is performed during the execution of works.
Erdarbeiten - Teil 3: Ausführung von Erdarbeiten
Diese Europäische Norm stellt Verfahren für den Aushub, Transport und Einbau von Böden und Fels für die Ausführung von Erdbauwerken und einen Leitfaden für die Erdarbeiten bereit. Sie behandelt außerdem den Aushub und Einbau von Felsmaterialien unter Wasser.
Das Nassbaggern von Böden und die damit verbundenen Auffüllungen im Spülverfahren sind durch FprEN 16907 6 und prEN 16907 7 abgedeckt.
Die Ausführung von Erdarbeiten richtet sich nach den Ergebnissen der Bemessungs- und Optimierungsphase der Erdarbeiten (prEN 16907 1), mit denen die Besonderheiten von Boden und Fels und ihre Eignung vorhergesehen werden sollten. Beim Eintreten von nicht vorhersehbaren Ereignissen werden zusätzliche Bemessungsschritte während der Ausführung der Erdarbeiten durchgeführt.
Terrassements - Partie 3 : Procédés de construction
Zemeljska dela - 3. del: Postopki izvajanja zemeljskih del
Ta standard opisuje postopke izvajanja izkopavanja, transporta ter vgradnje zemljin in kamnin za konstrukcijo zemeljskih struktur. Zajema izkopavanje in vgradnjo kamnitih materialov pod vodo. Izkopavanje zemljin in povezana hidravlična namestitev nasipov sta zajeti v 6. delu tega standarda. OPOMBA: Izvajanje zemeljskih del sledi sklepom faze projektiranja in optimizacije zemeljskih del (1. del), ki mora predvideti posebnosti zemljin in kamnin ter njihovo primernost. V primeru nekaterih dogodkov, ki jih ni bilo mogoče predvideti, se dodatno projektiranje izvede med izvajanjem del.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zemeljska dela - 3. del: Postopki izvajanja zemeljskih delErdarbeiten - Teil 3: Ausführung von ErdarbeitenTerrassement - Partie 3 : Procédés de constructionEarthworks - Part 3: Construction procedures93.020Zemeljska dela. Izkopavanja. Gradnja temeljev. Dela pod zemljoEarthworks. Excavations. Foundation construction. Underground worksICS:Ta slovenski standard je istoveten z:EN 16907-3:2018SIST EN 16907-3:2019en,fr,de01-april-2019SIST EN 16907-3:2019SLOVENSKI
STANDARD
SIST EN 16907-3:2019
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16907-3
December
t r s z ICS
{ uä r t r English Version
Earthworks æ Part
uã Construction procedures Terrassement æ Partie
u ã Procédés de construction
Erdarbeiten æ Teil
uã Ausführung von Erdarbeiten This European Standard was approved by CEN on
s v May
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x { r yæ uã t r s z ESIST EN 16907-3:2019
EN 16907-3:2018 (E) 2 Contents Page European foreword . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 General considerations . 6 4.1 Prerequisites to execution of earthworks . 6 4.2 Climatic conditions . 6 4.3 Environmental factors . 6 4.4 Use of secondary manufactured materials and recycled materials . 7 5 Excavation . 8 5.1 General. 8 5.2 Material type and excavation techniques . 8 5.3 Special considerations when excavating in rock . 10 5.4 Influence of excavated material end use . 11 5.5 Protection of cuts during construction . 11 5.5.1 Stability during construction . 11 5.5.2 Water control/drainage . 12 5.5.3 Erosion . 12 5.5.4 Protection of subgrade. 12 5.6 Excavation under water.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.