prEN ISO 7390

Building and civil engineering sealants - Determination of resistance to flow of sealants (ISO/DIS 7390:2026)

This International Standard specifies a method for the determination of the resistance to flow of sealants, by loss of cohesion under their own weight. These sealants are used in joints in vertical surfaces in building construction.

Dichtstoffe im Hoch- und Tiefbau - Bestimmung des Standvermögens von Dichtungsmassen (ISO/DIS 7390:2026)

Mastics pour le bâtiment et le génie civil - Détermination de la résistance au coulage des mastics (ISO/DIS 7390:2026)

L'ISO 7390:2002 prescrit une méthode pour la détermination de la résistance au coulage de mastics, par perte de cohésion sous leur propre poids. Ces mastics sont utilisés dans des joints à surfaces verticales en construction immobilière.

Tesnilne mase za stavbe in gradbene inženirske objekte - Ugotavljanje odpornosti proti tečenju tesnilnih mas (ISO/DIS 7390:2026)

Ta mednarodni standard določa metodo za določanje odpornosti tesnilnih mas proti tečenju, zaradi izgube kohezije pod lastno težo. Te tesnilne mase se uporabljajo v stikih na vertikalnih površinah v gradbeništvu.

General Information

• Status: Not Published
• Publication Date: 21-Nov-2027
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/SS B02 - Structures
• Drafting Committee: CEN/SS B02 - Structures
• Current Stage: 4020 - Submission to enquiry - Enquiry
• Start Date: 23-Apr-2026
• Completion Date: 23-Apr-2026
• Ref Project: oSIST prEN ISO 7390:2026 - Building and civil engineering sealants - Determination of resistance to flow of sealants (ISO/DIS 7390:2026)

Relations

• Revises: EN ISO 7390:2003 - Building construction - Jointing products - Determination of resistance to flow of sealants (ISO 7390:2003)
• Effective Date: 17-Sep-2025

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2026
Tesnilne mase za stavbe in gradbene inženirske objekte - Ugotavljanje odpornosti
proti tečenju tesnilnih mas (ISO/DIS 7390:2026)
Building and civil engineering sealants - Determination of resistance to flow of sealants
(ISO/DIS 7390:2026)
Dichtstoffe im Hoch- und Tiefbau - Bestimmung des Standvermögens von
Dichtungsmassen (ISO/DIS 7390:2026)
Mastics pour le bâtiment et le génie civil - Détermination de la résistance au coulage des
mastics (ISO/DIS 7390:2026)
Ta slovenski standard je istoveten z: prEN ISO 7390
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
International
Standard
ISO/DIS 7390
ISO/TC 59/SC 8
Building and civil engineering
Secretariat: SAC
sealants — Determination of
Voting begins on:
resistance to flow of sealants
2026-04-24
Mastics pour le bâtiment et le génie civil — Détermination de la
Voting terminates on:
résistance au coulage des mastics
2026-07-17
ICS: 91.100.50
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 7390:2026(en)
DRAFT
ISO/DIS 7390:2026(en)
International
Standard
ISO/DIS 7390
ISO/TC 59/SC 8
Building and civil engineering
Secretariat: SAC
sealants — Determination of
Voting begins on:
resistance to flow of sealants
Mastics pour le bâtiment et le génie civil — Détermination de la
Voting terminates on:
résistance au coulage des mastics
ICS: 91.100.50
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2026
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: [phone]
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 7390:2026(en)
ii
ISO/DIS 7390:2026(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Test method . 2
6.1 Preparation of test specimens .2
6.2 Procedures .2
6.2.1 General .2
6.2.2 Procedure A .2
6.2.3 Procedure B .3
7 Test report . 4

iii
ISO/DIS 7390:2026(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attent
...