Building and civil engineering sealants - Determination of adhesion/cohesion properties at constant temperature (ISO 9046:2021)

The document specifies a method for the determination of the adhesion/cohesion properties of sealants with predominantly plastic behaviour which are used in buildings and civil engineering works.

Dichtstoffe im Hoch- und Tiefbau - Bestimmung der Adhäsions-/Kohäsionseigenschaften bei konstanter Temperatur (ISO 9046:2021)

Das Dokument legt ein Verfahren zur Bestimmung der Adhäsions-/Kohäsionseigenschaften von Dichtstoffen mit vorwiegend plastischem Verhalten fest, die im Bauwesen verwendet werden.

Mastics pour le bâtiment et le génie civil - Détermination des propriétés d'adhésivité/cohésion à température constante (ISO 9046:2021)

Le présent document spécifie une méthode pour la détermination des propriétés d'adhésivité/cohésion des mastics de comportement essentiellement plastique qui sont utilisés dans les bâtiments et ouvrage de génie civil.

Tesnilne mase za stavbe in gradbene inženirske objekte - Ugotavljanje adhezijskih/kohezijskih lastnosti pri stalni temperaturi (ISO 9046:2021)

General Information

Status
Published
Technical Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
07-Apr-2021
Completion Date
07-Apr-2021

RELATIONS

Buy Standard

Standard
EN ISO 9046:2021
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 9046:2021
01-julij-2021
Nadomešča:
SIST EN ISO 9046:2005
Tesnilne mase za stavbe in gradbene inženirske objekte - Ugotavljanje
adhezijskih/kohezijskih lastnosti pri stalni temperaturi (ISO 9046:2021)

Building and civil engineering sealants - Determination of adhesion/cohesion properties

at constant temperature (ISO 9046:2021)
Dichtstoffe im Hoch- und Tiefbau - Bestimmung des Haft- und Dehnverhaltens von
Dichtstoffen bei konstanter Temperatur (ISO 9046:2021)
Mastics pour le bâtiment et le génie civil - Détermination des propriétés
d'adhésivité/cohésion à température constante (ISO 9046:2021)
Ta slovenski standard je istoveten z: EN ISO 9046:2021
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN ISO 9046:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 9046:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 9046:2021
EN ISO 9046
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2021
EUROPÄISCHE NORM
ICS 91.100.50 Supersedes EN ISO 9046:2004
English Version
Building and civil engineering sealants - Determination of
adhesion/cohesion properties at constant temperature
(ISO 9046:2021)

Mastics pour le bâtiment et le génie civil - Dichtstoffe im Hoch- und Tiefbau - Bestimmung des

Détermination des propriétés d'adhésivité/cohésion à Haft- und Dehnverhaltens von Dichtstoffen bei

température constante (ISO 9046:2021) konstanter Temperatur (ISO 9046:2021)
This European Standard was approved by CEN on 9 November 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9046:2021 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 9046:2021
EN ISO 9046:2021 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 9046:2021
EN ISO 9046:2021 (E)
European foreword

This document (EN ISO 9046:2021) has been prepared by Technical Committee ISO/TC 59 "Buildings

and civil engineering works" in collaboration with CCMC.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by October 2021, and conflicting national standards shall

be withdrawn at the latest by October 2021.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 9046:2004.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 9046:2021 has been approved by CEN as EN ISO 9046:2021 without any modification.

---------------------- Page: 5 ----------------------
SIST EN ISO 9046:2021
---------------------- Page: 6 ----------------------
SIST EN ISO 9046:2021
INTERNATIONAL ISO
STANDARD 9046
Third edition
2021-03
Building and civil engineering
sealants — Determination of
adhesion/cohesion properties at
constant temperature
Mastics pour le bâtiment et le génie civil — Détermination des
propriétés d'adhésivité/cohésion à température constante
Reference number
ISO 9046:2021(E)
ISO 2021
---------------------- Page: 7 ----------------------
SIST EN ISO 9046:2021
ISO 9046:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 9046:2021
ISO 9046:2021(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Principle ........................................................................................................................................................................................................................ 1

5 Apparatus ..................................................................................................................................................................................................................... 1

5.1 Substrate material ................................................................................................................................................................................ 1

5.2 Spacers ........................................................................................................................................................................................................... 1

5.3 Anti-adherent substrate .................................................................................................................................................................. 2

5.4 Ventilated convection-type oven ............................................................................................................................................. 2

5.5 Container for water immersion ................................................................................................................................................ 2

5.6 Test machine ............................................................................................................................................................................................. 2

5.7 Measuring device .................................................................................................................................................................................. 2

6 Preparation of test specimens ................................................................................................................................................................ 2

7 Conditioning of test specimens ............................................................................................................................................................. 4

7.1 Preconditioning ...................................................................................................................................................................................... 4

7.2 Specific conditioning .......................................................................................................................................................................... 5

8 Procedure..................................................................................................................................................................................................................... 5

9 Test report .......................................................................

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.