Ventilation for buildings - Instrumentation requirements for air velocity measurements in ventilated spaces

This standard specifies the main characteristics of air velocity measuring devices. This includes requirements for thermal velocity probes, recalibration and the signal processing of measurements in a ventilated space, including  those in the air jet and in the occupied zone.  Other types of velocity measuring devices should fulfil the performance parameters stated but appropriate calibration techniques should not necessarily be used which are described in this standard

Lüftung von Gebäuden - Gerätetechnische Anforderungen für Messungen der Luftgeschwindigkeit in belüfteten Räumen

Diese Norm legt die Hauptkenngrößen von Geräten zur Messung der Luftgeschwindigkeit fest. Dies schließt Anforderungen für Geschwindgkeitsmesssonden, Neukalibrierung und Signalverarbeitung von Messungen in einem belüfteten Raum einschließlich Messungen im Luftstrahl sowie im Aufenthaltsbereich ein. Andere Arten von Geschwindigkeitsmessgeräten sollten die festgestellten Leistungsparameter erfüllen, es ist jedoch nicht erforderlich, dass auch die in dieser Norm angegebenen Kalibrierverfahren angewendet werden müssen.

Ventilation des bâtiments - Prescription d'instrumentation pour les mesures de vitesses d'air dans des espaces ventilés

La présente norme spécifie les caractéristiques principales des instruments de mesure de vitesse d'air. Cela englobe les prescriptions relatives aux sondes de vitesse, au réétalonnage et au traitement des signaux provenant des mesurages effectués dans un espace ventilé, y compris dans le jet d'air et dans la zone d'occupation.

Prezračevanje stavb - Zahtevana merilna opremljenost za merjenje hitrosti zraka v prezračevanih prostorih

General Information

Status
Published
Publication Date
16-Apr-2002
Withdrawal Date
30-Oct-2002
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
04-Jun-2023
Completion Date
04-Jun-2023

Relations

Buy Standard

Standard
EN 13182:2004
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lüftung von Gebäuden - Gerätetechnische Anforderungen für Messungen der Luftgeschwindigkeit in belüfteten RäumenVentilation des bâtiments - Prescription d'instrumentation pour les mesures de vitesses d'air dans des espaces ventilésVentilation for buildings - Instrumentation requirements for air velocity measurements in ventilated spaces91.140.30VLVWHPLVentilation and air-conditioningICS:Ta slovenski standard je istoveten z:EN 13182:2002SIST EN 13182:2004en01-februar-2004SIST EN 13182:2004SLOVENSKI
STANDARD



SIST EN 13182:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13182April 2002ICS 23.120English versionVentilation for buildings - Instrumentation requirements for airvelocity measurements in ventilated spacesVentilation des bâtiments - Prescription d'instrumentationpour les mesures de vitesses d'air dans des espacesventilésLüftung von Gebäuden - Gerätetechnische Anforderungenfür Messungen der Luftgeschwindigkeit in belüftetenRäumenThis European Standard was approved by CEN on 27 December 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13182:2002 ESIST EN 13182:2004



EN 13182:2002 (E)2ContentspageForeword3Introduction41Scope42Normative references43Terms, definitions and symbols44Main characteristics of air flow patterns64.1General64.2Zone A64.3Zone B64.4Zone C65Relevant parameters86Requirements for velocity probe96.1Velocity and temperature range96.2Upper response frequency limit96.3Directional sensitivity96.4Influence of natural convection116.5Influence of ambient air temperature116.6Influence of air density126.7Dimensions127Signal processing requirements for air velocity measurements127.1General127.2Sampling rate and measuring period137.3Determination of mean value157.4Determination of standard deviation157.5Determination of turbulence intensity158Calibration158.1Instrument manufacturers158.1.1General158.1.2Accuracy158.2Recalibration by the user17Bibliography19SIST EN 13182:2004



EN 13182:2002 (E)3ForewordThis document EN 13182 has been prepared by Technical Committee CEN/TC 156 "Ventilation forbuildings", the secretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by October 2002, and conflicting national standards shall be withdrawnat the latest by October 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway,Portugal, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 13182:2004



EN 13182:2002 (E)4IntroductionEuropean Standards exist which deal with the evaluation of local air velocity in ventilated spaces. Thisparameter is important in the assessment of comfort1). It is determined in the assessment of air terminaldevice performance in the laboratory1) and in the site situation (in a building) where comparisons arerequired in relation to specified values1) .This standard provides a common basis for the instrumentation requirements for all the above applications.The characteristics of instruments can vary according to their measuring and signal processing principles,their construction, and the way in which they are used. It is important that the users compare the quality ofthe instruments available in the market at any given time and a check is made that they conform to therequirements of this European Standard.1
ScopeThis European Standard specifies the main characteristics of air velocity measuring devices. This includesrequirements for thermal velocity probes, recalibration and the signal processing o
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.