EN ISO 13350:2015
(Main)Fans - Performance testing of jet fans (ISO 13350:2015)
Fans - Performance testing of jet fans (ISO 13350:2015)
ISO 13350:2015 deals with the determination of those technical characteristics needed to describe all aspects of the performance of jet fans as defined in ISO 13349. It does not cover those fans designed for ducted applications, nor those designed solely for air circulation, e.g. ceiling fans and table fans.
The test procedures described in this International Standard relate to laboratory conditions. The measurement of performance under on-site conditions is not included.
Ventilatoren - Leistungsmessung von Strahlventilatoren (ISO 13350:2015)
Diese Internationale Norm befasst sich mit der Bestimmung jener technischen Leistungskenngrößen, die für die Beschreibung aller Leistungsmerkmale von Strahlventilatoren notwendig sind, wie in ISO 13349 festgelegt. Nicht abgedeckt werden Ventilatoren, die für einen Anschluss an Rohrleitungen konstruiert wurden und Ventilatoren, die ausschließlich der Luftzirkulation dienen, wie z. B. Decken- und Tischventilatoren.
Die in dieser Internationalen Norm beschriebenen Prüfverfahren beziehen sich auf Laborbedingungen. Die Leistungsmessung unter Bedingungen vor Ort ist nicht Bestandteil dieser Norm.
Ventilateurs - Essai de performance des ventilateurs accélérateurs (ISO 13350:2015)
L'ISO 13350:2015 traite de la détermination des caractéristiques techniques qui sont nécessaires pour décrire tous les aspects de la performance des ventilateurs accélérateurs tels que définis dans l'ISO 13349. Elle ne couvre pas les ventilateurs destinés aux applications en conduit ni ceux destinés uniquement à la circulation de l'air, par exemple les ventilateurs de plafond et de table.
Ventilatorji - Preskus lastnosti indukcijskih ventilatorjev (ISO 13350:2015)
Ta mednarodni standard obravnava določitev tehničnih značilnosti, ki so potrebne za opis vseh vidikov odprtih ventilatorjev, kot so opredeljeni v standardu ISO 13349. Ne vključuje ventilatorjev, zasnovanih za uporabo s cevmi, ali ventilatorjev, zasnovanih izključno za kroženje zraka, tj. stropnih in namiznih ventilatorjev.
Preskusni postopki, opisani v tem mednarodnem standardu, se nanašajo na laboratorijske pogoje. Meritev delovanja v pogojih na mestu uporabe ni vključena.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2016
1DGRPHãþD
SIST EN ISO 13350:2009
Ventilatorji - Preskus lastnosti indukcijskih ventilatorjev (ISO 13350:2015)
Fans - Performance testing of jet fans (ISO 13350:2015)
Ventilatoren - Leistungsmessung von Strahlventilatoren (ISO 13350:2015)
Ventilateurs - Essai de performance des ventilateurs accélérateurs (ISO 13350:2015)
Ta slovenski standard je istoveten z: EN ISO 13350:2015
ICS:
23.120 =UDþQLNL9HWUQLNL.OLPDWVNH Ventilators. Fans. Air-
QDSUDYH conditioners
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 13350
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2015
EUROPÄISCHE NORM
ICS 23.120 Supersedes EN ISO 13350:2008
English Version
Fans - Performance testing of jet fans (ISO 13350:2015)
Ventilateurs - Essai de performance des ventilateurs Ventilatoren - Leistungsmessung von
accélérateurs (ISO 13350:2015) Strahlventilatoren (ISO 13350:2015)
This European Standard was approved by CEN on 21 February 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13350:2015 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 13350:2015) has been prepared by Technical Committee ISO/TC 117 "Fans" in
collaboration with Technical Committee CEN/TC 156 “Ventilation for buildings” the secretariat of which
is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2016, and conflicting national standards shall be
withdrawn at the latest by April 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 13350:2008.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 13350:2015 has been approved by CEN as EN ISO 13350:2015 without any modification.
INTERNATIONAL ISO
STANDARD 13350
Second edition
2015-10-01
Fans — Performance testing of jet fans
Ventilateurs — Essai de performance des ventilateurs accélérateurs
Reference number
ISO 13350:2015(E)
©
ISO 2015
ISO 13350:2015(E)
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved
ISO 13350:2015(E)
Contents Page
Foreword .v
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms . 4
5 Characteristics to be measured . 5
5.1 General . 5
5.2 Thrust. 6
5.3 Input power . 6
5.4 Sound levels . 6
5.5 Vibration velocity. 6
5.6 Volume flowrate . 6
6 Instrumentation and measurements . 6
6.1 Dimension and areas . 6
6.2 Rotational speed . 6
6.3 Thrust. 6
6.3.1 Force balance systems . . . 6
6.3.2 Force transducers. 6
6.4 Input power . 7
6.5 Sound level . 7
6.6 Vibration velocity. 7
6.7 Volume flowrate . 7
6.7.1 Instruments for the measurement of pressure . 7
6.7.2 Instruments for the measurement of temperature . 7
7 Determination of thrust . 7
7.1 General . 7
7.2 Suspended configuration . 7
7.3 Supported configuration . 9
7.4 Test procedures .12
7.5 Test enclosure .13
8 Determination of sound level .13
8.1 General .13
8.2 Test arrangement .14
8.3 Enclosure suitability .15
8.4 Measurement procedure .15
9 Determination of vibration velocity .16
9.1 General .16
9.2 Test arrangement .16
9.3 Test procedure .16
9.4 Acceptance vibration velocity .16
10 Determination of flowrate .17
10.1 General .17
10.2 Upstream chamber method .17
10.3 Upstream Pitot traverse method .18
10.4 Directly connected flowrate-measuring device .18
11 Presentation of results .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.