EN ISO 12181-2:2011

Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)

ISO 12181-2:2011 specifies the complete specification operator for roundness of integral features only and covers complete roundness profiles only, i.e. geometrical characteristics of features of the type circle.

Geometrische Produktspezifikation (GPS) - Rundheit - Teil 2: Spezifikationsoperatoren (ISO 12181-2:2011)

Dieser Teil von ISO 12181 legt den vollständigen Spezifikationsoperator für Rundheit, d. h. geometrische Merkmale von Geometrieelementen der Art eines Kreises fest und betrifft nur vollständig geschlossene Rundheitsprofile.

Spécification géométrique des produits (GPS) - Circularité - Partie 2: Opérateurs de spécification (ISO 12181-2:2011 )

L'ISO 12181-2:2011 spécifie l'opérateur de spécification complet pour la circularité des éléments intégraux uniquement et couvre uniquement les profils de circularité complets, c'est-à-dire les caractéristiques géométriques des éléments de type cercle.

Specifikacija geometrijskih veličin izdelka - Krožnost - 2. del: Parametri za specifikacijo (ISO 12181-2:2011)

Ta del ISO 12181 določa celotne parametre samo za specifikacijo krožnosti vgrajenih funkcij in zajema samo celotne krožne profile, tj. geometrijske značilnosti funkcij tipskega kroga.

General Information

• Status: Published
• Publication Date: 31-Mar-2011
• Withdrawal Date: 30-Oct-2011
• ICS: 17.040.20 - Properties of surfaces
• ICS: 17.040.30 - Measuring instruments
• Technical Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Drafting Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Apr-2011
• Completion Date: 01-Apr-2011
• Ref Project: SIST EN ISO 12181-2:2011 - Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)

Relations

• Replaces: CEN ISO/TS 12181-2:2007 - Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO/TS 12181-2:2003)
• Effective Date: 09-Apr-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12181-2:2011
01-oktober-2011
1DGRPHãþD
SIST-TS CEN ISO/TS 12181-2:2008
6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND.URåQRVWGHO3DUDPHWUL]D
VSHFLILNDFLMR,62
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators
(ISO 12181-2:2011)
Geometrische Produktspezifikation (GPS) - Rundheit - Teil 2: Spezifikationsoperatoren
(ISO 12181-2:2011)
Spécification géométrique des produits (GPS) - Circularité - Partie 2: Opérateurs de
spécification (ISO 12181-2:2011)
Ta slovenski standard je istoveten z: EN ISO 12181-2:2011
ICS:
17.040.20 Lastnosti površin Properties of surfaces
SIST EN ISO 12181-2:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12181-2:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 12181-2:2011


EUROPEAN STANDARD
EN ISO 12181-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2011
ICS 17.040.20 Supersedes CEN ISO/TS 12181-2:2007
English Version
Geometrical product specifications (GPS) - Roundness - Part 2:
Specification operators (ISO 12181-2:2011)
Spécification géométrique des produits (GPS) - Circularité - Geometrische Produktspezifikation (GPS) - Rundheit - Teil
Partie 2: Opérateurs de spécification (ISO 12181-2:2011 ) 2: Spezifikationsoperatoren (ISO 12181-2:2011)
This European Standard was approved by CEN on 17 March 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12181-2:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12181-2:2011
EN ISO 12181-2:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 12181-2:2011
EN ISO 12181-2:2011 (E)
Foreword
This document (EN ISO 12181-2:2011) has been prepared by Technical Committee ISO/TC 213 "Dimensional
and geometrical product specifications and verification" in collaboration with Technical Committee
CEN/TC 290 “Dimensional and geometrical product specification and verification” the secretariat of which is
held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at
the latest by October 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 12181-2:2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 12181-2:2011 has been approved by CEN as a EN ISO 12181-2:2011 without any
modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 12181-2:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 12181-2:2011

INTERNATIONAL ISO
STANDARD 12181-2
First edition
2011-04-01

Geometrica
...