iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 17871:2020/FprA1

(Amendment)

Gas cylinders - Quick-release cylinder valves - Specification and type testing - Amendment 1 (ISO 17871:2020/FDAM 1:2024)

Gas cylinders - Quick-release cylinder valves - Specification and type testing - Amendment 1 (ISO 17871:2020/FDAM 1:2024)

No scope available

Gasflaschen - Schnellöffnungs-Flaschenventile - Spezifikation und Baumusterprüfung - Änderung 1 (ISO 17871:2020/FDAM 1:2024)

No scope available

Bouteilles à gaz - Robinets de bouteilles à ouverture rapide - Spécifications et essais de type - Amendement 1 (ISO 17871:2020/FDAM 1:2024)

No scope available

Plinske jeklenke - Ventili jeklenk za hitro razbremenitev - Specifikacija in preskus tipa - Dopolnilo A1 (ISO 17871:2020/FDAM 1:2024)

General Information

Status
Not Published
Publication Date
18-Jun-2024
ICS
23.020.35 - Gas cylinders
23.060.40 - Pressure regulators
Technical Committee
CEN/TC 23 - Transportable gas cylinders
Drafting Committee
CEN/TC 23 - Transportable gas cylinders
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
18-Mar-2024
Completion Date
18-Mar-2024
Directive
2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
Mandate
M/TDG - Standards for referencing in the RID-ADR
Ref Project
SIST EN ISO 17871:2020/kFprA1:2024 - Gas cylinders - Quick-release cylinder valves - Specification and type testing - Amendment 1 (ISO 17871:2020/FDAM 1:2024)

Relations

Amends
EN ISO 17871:2020 - Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2020)
Effective Date
11-Jan-2023

Buy Standard

EN ISO 17871:2020/oprA1:2023EN ISO 17871:2020/oprA1:2023
PreviousNext
Draft
EN ISO 17871:2020/oprA1:2023
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17871:2020/oprA1:2023
01-november-2023
Plinske jeklenke - Ventili jeklenk za hitro razbremenitev - Specifikacija in
preskušanje tipa - Dopolnilo A1 (ISO 17871:2020/DAM 1:2023)
Gas cylinders - Quick-release cylinder valves - Specification and type testing -
Amendment 1 (ISO 17871:2020/DAM 1:2023)
Gasflaschen - Schnellöffnungs-Flaschenventile - Spezifikation und Baumusterprüfung -
Änderung 1 (ISO 17871:2020/DAM 1:2023)
Bouteilles à gaz - Robinets de bouteilles à ouverture rapide - Spécifications et essais de
type - Amendement 1 (ISO 17871:2020/DAM 1:2023)
Ta slovenski standard je istoveten z: EN ISO 17871:2020/prA1
ICS:
23.020.35 Plinske jeklenke Gas cylinders
23.060.40 Tlačni regulatorji Pressure regulators
SIST EN ISO 17871:2020/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 17871:2020/oprA1:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 17871:2020/oprA1:2023
DRAFT AMENDMENT
ISO 17871:2020/DAM 1
ISO/TC 58/SC 2 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2023-08-28 2023-11-20
Gas cylinders — Quick-release cylinder valves —
Specification and type testing
AMENDMENT 1
Bouteilles à gaz — Robinets de bouteilles à ouverture rapide — Spécifications et essais de type
AMENDEMENT 1
ICS: 23.020.35
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 17871:2020/DAM 1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
SIST EN ISO 17871:2020/oprA1:2023
ISO 17871:2020/DAM 1:2023(E)
DRAFT AMENDMENT
ISO 17871:2020/DAM 1
ISO/TC 58/SC 2 Secretariat: AFNOR
Voting begins on: Voting terminates on:

Gas cylinders — Quick-release cylinder valves —
Specification and type testing
AMENDMENT 1
Bouteilles à gaz — Robinets de bouteilles à ouverture rapide — Spécifications et essais de type
AMENDEMENT 1
ICS: 23.020.35
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO 17871:2020/DAM 1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
SIST EN ISO 17871:2020/oprA1:2023
ISO 17871:2020/DAM 1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 10297:2024(Main)
Gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2024)
kSIST FprEN ISO 10297:2024

This document specifies design, type testing and marking requirements for:
a)       cylinder valves intended to be fitted to refillable transportable gas cylinders;
b)       main valves (excluding ball valves) for bundles of cylinders;
c)        cylinder valves or main valves with integrated pressure regulator (VIPR);
NOTE 1        This includes the following specific VIPR designs where:
1)  The pressure regulating system is acting as the primary valve operating mechanism (VIPR type B). This also includes designs where closure of the primary valve operating mechanism is obtained by closing the seat of the pressure regulating mechanism.
2)  The primary valve operating mechanism is located at the low-pressure side of the pressure regulating system (VIPR type C).
d)       valves for pressure drums and tubes;
which convey compressed, liquefied or dissolved gases.
NOTE 2        Where there is no risk of ambiguity, cylinder valves, main valves, VIPRs and valves for pressure drums and tubes are addressed with the collective term “valves” within this document.
This document does not apply to
—     valves for cryogenic equipment, portable fire extinguishers and liquefied petroleum gas (LPG);
—     quick-release cylinder valves (e.g. for fire-extinguishing, explosion protection and rescue applications) - requirements for quick-release cylinder valves are specified in ISO 17871 which contains normative references to this document;
—     self-closing cylinder valves and ball valves.
NOTE 3        Requirements for valves for cryogenic vessels are specified in ISO 21011 and at a regional level, e.g. in EN 1626. Requirements for LPG valves are specified in ISO 14245 or ISO 15995. Requirements for self-closing cylinder valves are specified in ISO 17879. Requirements for ball valves are specified in ISO 23826. Requirements for valves for portable fire extinguishers at a regional level are specified, for example, in the EN 3 series.
This document only covers the function of a valve as a closure. Other functions that are possibly integrated in the valve can be covered by other standards. Such standards do however not constitute requirements according to this document.
NOTE 4        Definition of and specific requirements for VIPRs in addition to those that are given in this document are specified in ISO 22435 for industrial applications or ISO 10524-3 for medical applications. Similarly, certain specific requirements for residual pressure valves (RPV) with or without a non-return function in addition to those that are given in this document are given in ISO 15996.
NOTE 5        Certain specific requirements for valves for breathing apparatus in addition to those that are given in this document are specified at a regional level, for example, in the EN 144 series. Certain specific requirements for quick-release valves for fixed fire-fighting systems in addition to those that are given in this document are specified in ISO 16003 and at a regional level, for example, in EN 12094–4.
NOTE 6        Requirements for manufacturing tests and examinations of valves covered by this document are given in ISO 14246.

  • Draft
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17871:2020(Main)
Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2020)
SIST EN ISO 17871:2020

This document, in conjunction with ISO 10297 and ISO 14246, specifies design, type testing, marking and manufacturing tests, and examinations requirements for quick-release cylinder valves intended to be fitted to refillable transportable gas cylinders, pressure drums and tubes which convey:
—     non-toxic;
—     non-oxidizing;
—     non-flammable; and
—     non-corrosive;
compressed or liquefied gases or extinguishing agents charged with compressed gases to be used for fire-extinguishing, explosion protection, and rescue applications.
NOTE 1  The main application of such quick-release cylinder valves is in the fire-fighting industry. However, there are other applications such as avalanche airbags, life raft inflation and similar applications.
NOTE 2  Where there is no risk of ambiguity, gas cylinders, pressure drums and tubes are addressed with the collective term "cylinders" within this document.
This document covers the function of a quick-release cylinder valve as a closure.
This document does not apply to quick-release cylinder valves for cryogenic equipment and for liquefied petroleum gas (LPG).
This document does not apply to quick-release cylinder valves if used as the main closure of portable fire extinguishers because portable fire extinguishers are not covered by transport regulation.
Quick-release cylinder valves of auxiliary refillable propellant gas cylinders used within or as part of portable fire extinguishers are covered by this document, if these cylinders are transported separately, e.g. for filling (see UN Model Regulations, Chapter 3.3, Special Provision 225, second note[1]).

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15996:2017(Main)
Gas cylinders - Residual pressure valves - Specification and type testing of cylinder valves incorporating residual pressure devices (ISO 15996:2017)
SIST EN ISO 15996:2018

ISO 15996:2017 specifies design, type testing and marking requirements for cylinder valves incorporating residual pressure devices, hereinafter referred to as residual pressure valves (RPVs). This document applies to the following types of RPVs:
a)    cylinder valves intended to be fitted to refillable transportable gas cylinders;
b)    main valves (excluding ball valves) for cylinder bundles;
c)    cylinder valves or main valves with integrated pressure regulator (VIPR);
d)    valves for pressure drums and tubes;
which convey compressed or liquefied gases.
NOTE          Where there is no risk of ambiguity, cylinders, pressure drums, tubes and cylinder bundles are addressed with the collective term "cylinder" within this document.
These requirements are in addition to those in ISO 10297.
For RPD stand-alone devices this document can also be applied.
ISO 15996:2017 does not apply to RPVs for portable fire extinguishers, cryogenic equipment, low pressure refrigerant gases (cylinder test pressure less than 50 bar), dissolved gases or liquefied petroleum gas (LPG).

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17879:2017(Main)
Gas cylinders - Self-closing cylinder valves - Specification and type testing (ISO 17879:2017)
SIST EN ISO 17879:2018

ISO 17879:2017 specifies the design, type testing, marking and manufacturing tests and examinations requirements for self-closing cylinder valves intended to be fitted to refillable transportable gas cylinders which convey compressed, liquefied or dissolved gases.
NOTE 1       The main applications for such self-closing cylinder valves are in the calibration gas and beverage industries.
ISO 17879:2017 covers the function of a self-closing cylinder valve as a closure.
NOTE 2       Requirements for standard cylinder valves are given in ISO 10297. Requirements for quick-release cylinder valves are given in ISO 17871.
ISO 17879:2017 is not applicable to self-closing cylinder valves for cryogenic equipment, for portable fire extinguishers, or for liquefied petroleum gas (LPG).
NOTE 3       Requirements for valves for cryogenic vessels are specified in ISO 21011 and at a regional level, for example, in EN 1626. Requirements for valves for portable fire extinguishers at a regional level are specified, for example, in EN 3 series. Requirements for self-closing LPG cylinder valves are specified in ISO 14245.
NOTE 4       Additional requirements for pressure-relief devices might be specified in international/regional regulations/standards.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11114-4:2017(Main)
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017)
SIST EN ISO 11114-4:2017

ISO 11114-4: 2017 specifies test methods and the evaluation of results from these tests in order to qualify steels suitable for use in the manufacture of gas cylinders (up to 3 000 l) for hydrogen and hydrogen bearing embrittling gases.
This document only applies to seamless steel gas cylinders.
The requirements of this document are not applicable if at least one of the following conditions for the intended gas service is fulfilled:
-      the working pressure of the filled embrittling gas is less than 20 % of the test pressure of the cylinder;
-      the partial pressure of the filled embrittling gas of a gas mixture is less than 5 MPa (50 bar) in the case of hydrogen and other embrittling gases, with the exception of hydrogen sulphide and methyl mercaptan; in such cases, the partial pressure shall not exceed 0,25 MPa (2,5 bar).
NOTE       In such cases, it is possible to design the cylinder as for ordinary (non-embrittling) gases.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12209:2013/A1:2016(Amendment)
Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Amendment 1: Outlet connection up to a maximum cylinder working pressure of 500 bar (ISO 12209:2013/Amd 1:2016, Corrected version 2017-03)
SIST EN ISO 12209:2013/A1:2017
  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13341:2010/A1:2015(Amendment)
Gas cylinders - Fitting of valves to gas cylinders - Amendment 1 (ISO 13341:2010/Amd 1:2015)
SIST EN ISO 13341:2011/A1:2015

2014-04-17 GVN: Draft for // vote received in ISO/CS (see notification of 2014-04-10 in dataservice).
2013-02-22 EMA: Draft for // ENQ received in ISO/CS (see notification of 2013-02-22 in dataservice).

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    5 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12209:2013(Main)
Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air (ISO 12209:2013)
SIST EN ISO 12209:2013

ISO 12209:2013 specifies the characteristics of outlet connections for gas cylinder valves for compressed breathable air gas cylinders. It states the fundamental requirements for both; the connection and its components and includes basic dimensions. Included in ISO 12209:2013 the following connections:
a) yoke type outlet connection for SCUBA use up to a maximum cylinder working pressure of 232 bar;
b) threaded type outlet connections up to a maximum cylinder working pressure of 232 bar and 300 bar; and
c) threaded type outlet connection for SCUBA use up to a maximum cylinder working pressure of 232 bar including adaptor for users to convert into a yoke type outlet.
Annex A gives the outlet connection type test procedures.
Requirements for cylinder valves (see ISO 10297) are not covered by ISO 12209:2013.
Requirements for material specifications and gas/material compatibility (see ISO 11114‑1 and ISO 11114‑2) are not covered by ISO 12209:2013.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11114-3:2010(Main)
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010)
SIST EN ISO 11114-3:2011

ISO 11114-3:2010 specifies a test method to determine the autogenous ignition temperature of non-metallic materials in pressurized gaseous oxygen.
The autogenous ignition temperature is one criterion for ranking materials, and can be used to assist with the choice of materials used in the presence of gaseous oxygen.
A comprehensive bibliography of the published material on which ISO 11114-3:2010 is based is included.
It is intended that ISO 11114-3:2010 be used for the selection of non-metallic materials for gas cylinders and accessories, for example to select the materials in order to meet the requirement for type testing for oxygen compatibility of all cylinder valves for highly oxidizing gases as specified in ISO 10297.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day