EN 12617-4:2002

Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion

This European Standard specifies a method for measuring the dimensional stability (i.e. the shrinkage and expansion movement) due to changes in the moisture content of hydraulic mortars or concretes (CC) or polymer hydraulic cement mortars or concretes (PCC) as defined in EN 1504-1. Two methods are proposed, namely a procedure for unrestrained movement and a procedure for restrained movement.
The provisions of the standard are applicable to grout, mortar or concrete products or systems with a maximum aggregate size of 10 mm.

Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Teil 4: Bestimmung des Schwindens und Quellens

Diese Europäische Norm ist Teil einer Reihe von Normen über Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken. Diese Europäische Norm beschreibt ein Verfahren zur Messung der Maßbeständigkeit (d.h. des Schindens und Quellens) aufgrund von Änderungen des Feuchtegehalts von Produkten und Systemen für die Instandsetzung mit HC-, PCC-, und PC-Bindemitteln nach EN 1504-1.

Produits et systèmes de protection et de réparation des structures en béton - Méthodes d'essai - Partie 4: Détermination du retrait et de l'expansion

La présente Norme européenne décrit une méthode de mesure de la stabilité dimensionnelle (expansion / retrait) résultant des variations de teneur en eau des mortiers hydrauliques ou bétons hydrauliques (CC), ou des mortiers ou bétons de ciment hydrauliques polymères (PCC) tels que définis dans l'EN 1504-1. Deux méthodes sont proposées : un mode opératoire pour le mouvement libre et un mode opératoire pour le mouvement empêché.
La présente Norme européenne s'applique aux coulis, mortiers, ou aux produits ou systèmes pour béton dont la taille des granulats ne dépasse pas 10 mm.

Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij - Preskusne metode - 4. del: Določevanje krčenja in nabrekanja

General Information

• Status: Published
• Publication Date: 21-May-2002
• Withdrawal Date: 30-Dec-2002
• ICS: 91.080.40 - Concrete structures
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
• Drafting Committee: CEN/TC 104/SC 8/WG 2 - Repair
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2023
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/128 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on products for concrete, mortar and grout
• Ref Project: SIST EN 12617-4:2002 - Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion

Relations

• Parent: EN 12617-1:2003 - Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Teil 4: Bestimmung des Schwindens und QuellensProduits et systemes de protection et de réparation des structures en béton - Méthodes d'essai - Partie 4: Détermination du retrait et de l'expansionProducts and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. Mortar91.080.40Betonske konstrukcijeConcrete structuresICS:Ta slovenski standard je istoveten z:EN 12617-4:2002SIST EN 12617-4:2002en01-november-2002SIST EN 12617-4:2002SLOVENSKI
STANDARD



SIST EN 12617-4:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12617-4May 2002ICS 91.080.40English versionProducts and systems for the protection and repair of concretestructures - Test methods - Part 4: Determination of shrinkageand expansionProduits et systèmes de protection et de réparation desstructures en béton - Méthodes d'essai - Partie 4:Détermination du retrait et du gonflementProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Prüfverfahren - Teil4: Bestimmung des Schwindens und QuellensThis European Standard was approved by CEN on 4 January 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12617-4:2002 ESIST EN 12617-4:2002



EN 12617-4:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions and symbols.43.1Terms and definitions.43.2Symbols.44Principle.55Apparatus.55.1Unrestrained movement mould.55.2Measurement studs.55.3Measuring apparatus.55.4Calibration rod.55.5Tampers.65.6Concrete slab test panels.65.7Standard laboratory climate.65.8
...