EN 251:2012
(Main)Shower trays - Connecting dimensions
Shower trays - Connecting dimensions
This European Standard specifies requirements for the connecting dimensions for shower trays, regardless of the material used for their manufacture.
This European Standard applies to shower trays used for domestic purposes and complements the standards for shower trays made from different materials, the existing standard on waste fittings (EN 274-1) in terms of their dimensional requirements.
NOTE Only dimensions are compulsory. The shape of the appliance in the figures is for illustration only; it in no way
prejudices the shape of the appliance which is left to the initiative of the manufacturer.
Duschwannen - Anschlussmaße
Diese Europäische Norm legt die Anforderungen für die Anschlussmaße von Duschwannen, unabhängig vom verwendeten Werkstoff für deren Herstellung, fest.
Diese Europäische Norm gilt für Duschwannen für den Hausgebrauch und ergänzt die Normen für Duschwannen, hergestellt aus verschiedenen Werkstoffen, sowie die bestehende Norm für Ablaufgarnituren (EN 274-1) hinsichtlich der maßlichen Anforderungen.
ANMERKUNG Nur die angegebenen Maße sind verbindlich. Die in den Bildern dargestellte Form der Gegenstände wurde nur für das bessere Verständnis gewählt. Sie schreibt nicht die endgültige Form der Gegenstände vor, die der Wahl des Herstellers überlassen bleibt.
Receveurs de douche - Cotes de raccordement
La présente norme spécifie les exigences relatives aux cotes de raccordement des receveurs de douche, indépendamment du matériau dont ils sont constitués.
La présente Norme européenne s'applique aux receveurs de douche à usage domestique et complète les normes relatives aux receveurs de douche faits à partir de différents matériaux ainsi que les normes existantes sur les dispositifs de vidage (EN 274-1) en matière de prescriptions dimensionnelles.
NOTE Seules les dimensions des parties cotées doivent être respectées. La forme schématique des appareils représentés sur les figures sert uniquement à faciliter la compréhension ; elle ne laisse aucunement présager de la forme définitive de l'appareil qui est laissée à l'initiative des fabricants.
Kadi za prhanje - Priključne mere
Ta evropski standard določa zahteve za priključne mere za kadi za prhanje, ne glede na material, uporabljen za njihovo proizvodnjo. Ta evropski standard se uporablja za kadi za prhanje, ki se uporabljajo v gospodinjstvih, in dopolnjuje standarde za kadi za prhanje, izdelane iz različnih materialov, ter sobstoječi standard o fazonskih delih (EN 274-1) glede zahtev za mere.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Duschwannen - AnschlussmaßeReceveurs de douche - Cotes de raccordementShower trays - Connecting dimensions91.140.70Sanitarne napraveSanitary installationsICS:Ta slovenski standard je istoveten z:EN 251:2012SIST EN 251:2013en,fr,de01-december-2013SIST EN 251:2013SLOVENSKI
STANDARDSIST EN 251:20031DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 251
October 2012 ICS 91.140.70 Supersedes EN 251:2003English Version
Shower trays - Connecting dimensions
Receveurs de douche - Cotes de raccordement
Duschwannen - Anschlussmaße This European Standard was approved by CEN on 18 August 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 251:2012: ESIST EN 251:2013
Determination of dimensions .9A.1 Test apparatus .9A.2 Determination of the fit of the control gauge in the waste outlet hole . 11 SIST EN 251:2013
1 Scope This European Standard specifies requirements for the connecting dimensions for shower trays, regardless of the material used for their manufacture. This European Standard applies to shower trays used for domestic purposes and complements the standards for shower trays made from different materials, the existing standard on waste fittings (EN 274-1) in terms of their dimensional requirements. NOTE Only dimensions are com
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.