FprEN 3475-203
(Main)Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions
- Abstract
This document specifies a method of measuring the dimensions of conductors and cables.
It is used together with EN 3475-100.
- Status
- Not Published
- Publication Date
- 10-May-2027
- Technical Committee
- ASD-STAN - Aerospace
- Drafting Committee
- ASD-STAN/D 2/S 2 - Cables & Stripping Tools
- Current Stage
- 4599 - Dispatch of FV draft to CMC - Finalization for Vote
- Start Date
- 28-Sep-2026
- Completion Date
- 28-Sep-2026
FprEN 3475-203 is a CEN draft European Standard for aerospace series cables, electrical, aircraft use. It specifies a method for measuring the dimensions of conductors and cables, and it is used together with EN 3475-100. Engineers, cable suppliers, test laboratories, and quality teams use it to measure conductor size, insulation or jacket thickness, and outside diameter in a consistent way.
What does FprEN 3475-203 specify?
FprEN 3475-203 specifies one measurement method for the dimensions of conductors and cables used in aircraft. The document focuses on dimensional checking, and it relies on EN 3475-100 for the general test-method framework.
FprEN 3475-203 is organized into six clauses and a bibliography:
- Clause 1 - Scope
- Clause 2 - Normative references
- Clause 3 - Terms and definitions
- Clause 4 - Apparatus
- Clause 5 - Method
- Clause 6 - Requirements
In practice, the standard is about how to measure, what to observe during the measurement, and what the measured values must match in the product standard or technical specification.
What are the key requirements of FprEN 3475-203?
FprEN 3475-203 gives separate apparatus and checking rules for conductor diameter, insulation and/or jacket thickness, and external diameter. The main point is that the same cable feature is measured in a controlled way, then compared with the applicable product standard or technical specification.
- Clause 4.1 requires a friction or dial micrometer with flat ends of at least 5 mm for conductor diameter, with vernier reading to the nearest 0,01 mm. This gives the resolution needed to detect small conductor-size differences.
- Clause 4.2 requires a profile projector, measuring microscope, or equivalent apparatus for insulation and/or jacket measurements. This matters when the layer thickness or shape is better checked optically than with a micrometer.
- Clause 4.3 requires a friction or dial micrometer with flat ends of at least 5 mm for single cables and at least 15 mm for multiconductor cables, or a profile projector, for external diameter measurements.
- Clause 5.1 requires verification of the number of strands, the nominal strand diameter, and the diameter of the suitably straightened conductor. The outside diameter (OD) is measured at least three locations about one metre apart, with two readings taken at 90° each time. That gives an average over the length, not a single point value.
- Clause 5.2.1 covers wrapped insulation and/or jacket. The measurement checks the number of tapes, the sealing of the tapes, the tape overlap, and the minimum thickness of the outer coating or sealed material, including PTFE where applicable.
- Clauses 5.2.2 and 5.2.3 cover extruded insulation and/or jacket. The radial thickness is measured at the thinnest and thickest points, and four measurements are taken around the circumference at 90° intervals, starting at the thinnest point.
- Clause 6.2.2 sets the acceptance rule for extruded insulation and/or jackets: the minimum radial thickness must not be less than 70% of the maximum measured value.
- Clause 6.2.3 and 6.3 require the average of the four PTFE thickness measurements to be reported and at least meet the minimum value given in the product standard or product design, and the average external diameter must conform to the product standard.
What changed in FprEN 3475-203 from the previous edition?
FprEN 3475-203 will supersede EN 3475-203:2006. The draft states three technical changes:
- PTFE is added as a sealed material in the wrapped insulation and/or jacket method.
- The wrapped-construction requirement is expanded to cover the number of tapes, tape sealing, tape overlap, and minimum thickness for PTFE-related constructions.
- The PTFE thickness average requirement now states that the average of the four measurements shall be reported and shall meet at least the minimum value in the product standard, if applicable.
Which standards are used with FprEN 3475-203?
FprEN 3475-203 is used together with EN 3475-100, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General. EN 3475-100 provides the general test-method basis for the series, while Part 203 gives the specific dimensional measurement method.
What does the FprEN 3475-203 document contain?
FprEN 3475-203 contains the apparatus specifications, measurement steps, and acceptance checks for conductor diameter, insulation and/or jacket thickness, and external diameter. It distinguishes between wrapped and extruded constructions, and between single insulated wires or cables and non-cylindrical cables.
The document also shows how to report dimensions in a way that can be compared with product-standard values. Its procedures are meant for test laboratories, inspection staff, and cable manufacturers that need repeatable dimensional measurements on aircraft electrical cables.
Relations
- Effective Date
- 15-Oct-2025
Get Certified
Connect with accredited certification bodies for this standard

BUREAU VERITAS Certification Germany
Bureau Veritas certification in Germany.

Element Materials Technology
Materials testing and product certification.

AQMS Ltd.
AQMS provides ISO certification to SMEs across the UK.
Sponsored listings
Frequently Asked Questions
FprEN 3475-203 is a draft published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions". This standard covers: This document specifies a method of measuring the dimensions of conductors and cables. It is used together with EN 3475-100.
This document specifies a method of measuring the dimensions of conductors and cables. It is used together with EN 3475-100.
FprEN 3475-203 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
FprEN 3475-203 has the following relationships with other standards: It is inter standard links to EN 3475-203:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
FprEN 3475-203 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2026
Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Preskusne metode -
203. del: Mere
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions
Luft- und Raumfahrt– Elektrische Leitungen für Luftfahrtverwendung– Prüfverfahren–
Teil203: Maße
Ta slovenski standard je istoveten z: prEN 3475-203
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
prEN 3475-203
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2025
ICS 49.060 Will supersede EN 3475-203:2006
English Version
Aerospace series - Cables, electrical, aircraft use - Test
methods - Part 203: Dimensions
Luft- und Raumfahrt- Elektrische Leitungen für
Luftfahrtverwendung- Prüfverfahren- Teil203: Maße
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3475-203:2025 E
worldwide for CEN national Members.
prEN 3475-203:2025 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Apparatus . 4
4.1 Conductor diameter . 4
4.2 Insulation and/or jacket . 4
4.3 External diameter . 4
5 Method . 4
5.1 Conductor . 4
5.2 Insulation and/or jacket . 5
5.2.1 Wrapped insulation and/or jacket . 5
5.2.2 Extruded insulation and/or jacket . 5
5.2.3 Minimum average thickness . 5
5.3 External diameter . 5
5.3.1 Single insulated wire or cable . 5
5.3.2 Non cylindrical cables . 5
6 Requirements . 5
6.1 Conductor . 5
6.2 Insulation and/or jacket . 5
6.2.1 Wrapped .
...



