EN ISO 801-1:1996

Pulps - Determination of saleable mass in lots - Part 1: Pulp baled in sheet form (ISO 8001-1:1994)

Cancels and replaces the first edition (1979). Specifies a method for determining the dryness of a lot of pulp baled in sheet form and for calculating its saleable mass. Applicable to all kinds of pulp baled in sheet form. Does not apply to pulp baled in lots in slab form or to pulp baled in unitized lots.

Zellstoffe - Bestimmung des Handelsgewichtes von Lieferposten - Teil 1: Zellstoffbogen in Ballen (ISO 801-1:1994)

Dieser Teil von ISO 801 legt ein Verfahren zur Bestimmung der Trockenmasse von Zellstoffbogen in Ballen und für die Berechnung des Handelsgewichtes fest. Das Verfahren ist für alle Arten von Zellstoffbogen in Ballen anwendbar. Es ist nicht anwendbar für Zellstofflagen in Ballen oder für Zellstoffballen in Großballen. Ein Beispiel für ein vollständiges Zertifikat der Untersuchung und die entsprechenden Berechnungen sind im Anhang A zusammengestellt.

Pâtes - Détermination de la masse marchande des lots - Partie 1: Balles de pâtes en feuilles (ISO 801-1:1994)

La présente partie de l'ISO 801 prescrit une méthode pour la détermination de la siccité d'un lot de pâte en balles constituées de feuilles et pour le calcul de sa masse marchande. La méthode est applicable à toutes les qualités de pâte en balles constituées de feuilles. Elle n'est pas applicable aux lots de balles de pâte en plaques et aux pâtes en balles élémentaires. Un exemple de rapport d'analyse complet et des calculs correspondants est donné dans l'annexe A. L'annexe B donne des détails concernant le matériel pour le repérage des feuilles échantillons dans les balles échantillons.

Vlaknine - Določevanje prodajne mase v pošiljkah - 1. del: Vlaknine v obliki listov, povezane v bale (ISO 801-1:1994)

General Information

• Status: Published
• Publication Date: 17-Sep-1996
• ICS: 85.040 - Pulps
• Technical Committee: CEN/TC 172 - Pulp, paper and board
• Drafting Committee: CEN/TC 172 - Pulp, paper and board
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 02-May-2014
• Completion Date: 02-May-2014
• Ref Project: SIST EN ISO 801-1:2000 - Pulps - Determination of saleable mass in lots - Part 1: Pulp baled in sheet form (ISO 8001-1:1994)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 801-1:2000
01-april-2000
9ODNQLQH'RORþHYDQMHSURGDMQHPDVHYSRãLOMNDKGHO9ODNQLQHYREOLNLOLVWRY
SRYH]DQHYEDOH,62
Pulps - Determination of saleable mass in lots - Part 1: Pulp baled in sheet form (ISO
8001-1:1994)
Zellstoffe - Bestimmung des Handelsgewichtes von Lieferposten - Teil 1: Zellstoffbogen
in Ballen (ISO 801-1:1994)
Pâtes - Détermination de la masse marchande des lots - Partie 1: Balles de pâtes en
feuilles (ISO 801-1:1994)
Ta slovenski standard je istoveten z: EN ISO 801-1:1996
ICS:
85.040 Vlaknine Pulps
SIST EN ISO 801-1:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 801-1:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 801-1:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 801-1:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 801-1:2000
INTERNATIONAL ISO
STANDARD
801-1
Second edition
1994-08-0 1
Pulps - Determination of saleable mass in
lots -
Part 1:
Pulp baled in sheet form
PS tes - Determination de Ia masse marchande des lots -
Partie 1: Balles de p&e en feuilles
Reference number
ISO 801-1: 1994(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 801-1:2000
ISO 801=1:1994(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(1 EC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 801-1 was prepared by Technical Committee
ISO/TC 6, Paper, board and pulps, Subcommittee SC 5, Test methods
and quality specifications for pulp.
This second edition cancels and replaces the first edition
(ISO 801-1 :1979), of which it constitutes a technical revision.
ISO 801 consists of the following Parts, under the general title Pulps -
Determination of saleable mass in lots:
- Part 1: Pulp baled in sheet form
- Part 2: Pulps (such as flash-dried pulps) baled in slabs
- Part 3: Unitized bales
Annexes A and B of this part of ISO 801 are for information only.
0 ISO 1994
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1 211 Geneve 20 l Switzerland
Printed in Switzerland

---------------------- Page: 6 ----------------------

SIST EN ISO 801-1:2000
INTERNATIONAL STANDARD 0 ISO ISO 801=1:1994(E)
Pulps - Determination of saleable mass in lots -
Part 1:
Pulp baled in sheet form
or
1 Scope
- its saleable mass (2.7).
This patt of ISO 801 specifies a method for deter-
mining the dryness of a lot of pulp baled in sheet form
2.2 gross mass: The total mass of a bale, a part of
and for calculating its saleable mass.
a lot or a lot comprising
This method is applicable to all kinds of pulp baled in
- contents;
sheet form. lt does not apply to pulp baled in lots in
slab form or to pulp baled in unitized lots.
- wrappers (Pulp - Paper);
An example of a full certificate of analysis and related
- packaging wires or strappings.
calculations is given in annex A. Annex B gives de-
tails of equipment for marking the Position of speci-
2.3 oven-dry mass: The mass obtained on drying
men sheets in Sample bales.
pulp at 105 “C + 2 “C, until constant mass is reached.
-
2.4 absolute dryness: The ratio of the oven-dry
mass (2.3) of the pulp to its initial mass, expressed
2 Definitions
as a percentage.
For the purposes of this part of ISO 801, the following
2.5 air-dry mass: The mass of the pulp when its
definitions apply.
moisture content is in equilibrium with the ambient
atmosphere.
2.1 tot: The total number of bales of the same sort
of pulp of specific characteristics.
2.6 theoretical commercial dryness: A conven-
tional equilibrium value of 88 % or 90 % according to
The number of bales comprising a lot is indicated by
the country and/or commercial agreements?
the invoice or by agreement between the interested
...