EN ISO 6360-4:2004

Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments (ISO 6360-4:2004)

ISO 6360-4:2004 specifies the code numbers for specific characteristics of rotary diamond instruments and diamond-coated discs for use in dentistry. This three-digit number forms the fourth group of three digits in the 15-digit overall number, the principles of which are explained in ISO 6360-1 and ISO 6360-2.
ISO 6360-4:2004 also gives a three-digit number which in addition to the 15-digit code number may be used to provide additional information for diamond instruments and diamond-coated discs, at the discretion of the manufacturer.
NOTE In addition to terms for rotary instruments and accessories used in two of the three official ISO languages (English, French and Russian), ISO 6360-4:2004 gives the equivalent terms in the German language; these are published under the responsibility of the member body for Germany (DIN). However, only the terms given in the official languages can be considered as ISO terms.

Zahnheilkunde - Nummernsystem für rotierende Instrumente - Teil 4: Besondere Eigenschaften von Diamantinstrumenten (ISO 6360-4:2004)

Dieser Teil von ISO 6360 enthält Kennzahlen für besondere Eigenschaften von Diamantinstrumenten. Die dreistellige Nummer bildet die vierte Gruppe mit drei Zahlen in der 15-stelligen Gesamtnummer, deren Grundprinzipien in ISO 6360-1 und ISO 6360-2 beschrieben werden.
Weiterhin wird eine dreistellige Nummer angegeben, die nach Ermessen des Herstellers zusätzlich zur 15-stelligen Gesamtnummer für Diamantinstrumente verwendet werden kann.

Art dentaire - Système de codification numérique pour instruments rotatifs - Partie 4: Caractéristiques spécifiques des instruments diamantés (ISO 6360-4:2004)

L'ISO 6360-4:2004 spécifie les codes correspondant à des caractéristiques spécifiques des instruments et disques diamantés. Ce nombre à trois chiffres forme le quatrième groupe de trois chiffres du code à 15 chiffres, dont les principes sont expliqués dans l'ISO 6360-1 et l'ISO 6360-2.
L'ISO 6360-4:2004 donne en plus un nombre à trois chiffres qui peut être ajouté à la codification en 15 chiffres pour les instruments diamantés et les disques diamantés, à la discrétion du fabricant.

Zobozdravstvo – Sistem številčnega kodiranja rotacijskih instrumentov – 4. del: Posebne lastnosti diamantnih instrumentov (ISO 6360-4:2004)

General Information

• Status: Published
• Publication Date: 31-May-2004
• ICS: 11.060.25 - Dental instruments
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 23-Feb-2010
• Completion Date: 23-Feb-2010
• Ref Project: SIST EN ISO 6360-4:2005 - Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments (ISO 6360-4:2004)

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2005
=RER]GUDYVWYR±6LVWHPãWHYLOþQHJDNRGLUDQMDURWDFLMVNLKLQVWUXPHQWRY±GHO
3RVHEQHODVWQRVWLGLDPDQWQLKLQVWUXPHQWRY,62
Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics
of diamond instruments (ISO 6360-4:2004)
Zahnheilkunde - Nummernsystem für rotierende Instrumente - Teil 4: Besondere
Eigenschaften von Diamantinstrumenten (ISO 6360-4:2004)
Art dentaire - Systeme de codification numérique pour instruments rotatifs - Partie 4:
Caractéristiques spécifiques des instruments diamantés (ISO 6360-4:2004)
Ta slovenski standard je istoveten z: EN ISO 6360-4:2004
ICS:
11.060.25 =RERWHKQLþQLLQVWUXPHQWL Dental instruments
35.040 Nabori znakov in kodiranje Character sets and
informacij information coding
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 6360-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2004
ICS 11.060.25
English version
Dentistry - Number coding system for rotary instruments - Part 4:
Specific characteristics of diamond instruments (ISO 6360-
4:2004)
Art dentaire - Système de codification numérique pour Zahnheilkunde - Nummernsystem für rotierende
instruments rotatifs - Partie 4: Caractéristiques spécifiques Instrumente - Teil 4: Besondere Eigenschaften von
des instruments diamantés (ISO 6360-4:2004) Diamantinstrumenten (ISO 6360-4:2004)
This European Standard was approved by CEN on 7 May 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6360-4:2004: E
worldwide for CEN national Members.

Foreword
This document (EN ISO 6360-4:2004) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 "Dentistry", the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by December 2004, and conflicting national
standards shall be withdrawn at the latest by December 2004.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 6360-4:2004 has been approved by CEN as EN ISO 6360-4:2004 without any
modifications.
INTERNATIONAL ISO
STANDARD 6360-4
First edition
2004-06-01
Dentistry — Number coding system for
rotary instruments —
Part 4:
Specific characteristics of diamond
instruments
Art dentaire — Système de codification numérique pour instruments
rotatifs —
Partie 4: Caractéristiques spécifiques des instruments diamantés

Reference number
ISO 6360-4:2004(E)
©
ISO 2004
ISO 6360-4:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
©
ii ISO 2004 – All rights reserved

ISO 6360-4:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO6360-4 was prepared by Technical Committee ISO/TC106, Dentistry, Subcommittee SC4, Dental
instruments.
ISO 6360 consists of the following parts, under the general title Dentistry — Number coding system for rotary
instruments:
— Part 1: General characteristics
— Part 2: Shapes
— Part 3: Specific characteristics of burs and cutters
— Part 4: Specific characteristics of diamond instruments
— Part 6: Specific characteristics of abrasive instruments
— Part 7: Specific characteristics of mandrels and special instruments
©
ISO 2004 – All rights reserved iii

ISO 6360-4:2004(E)
Introduction
This part of ISO 6360 is one of a series of International Standards relating to dental rotary instruments. A wide
variety of dental rotary instruments, including root-canal instruments, is manufactured throughout the world for
use by the dental profession.
ISO 6360 provides a general number coding system for all types of dental rotary instruments, including
a
...