EN 3745-410:2007

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life

This standard specifies method for determining life versus temperature curves of an optical cable.

Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 410: Lebensdauer unter Temperatureinwirkung

Diese Norm legt ein Verfahren zur Bestimmung der Lebensdauer unter Temperatureinwirkung von optischen Leitungen fest.

Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 410 : Durée de vie en température

Aeronavtika - Optična vlakna in kabli za uporabo v zračnih plovilih - Preskusne metode - 410. del: Življenjska doba pod temperaturnim vplivom

General Information

• Status: Withdrawn
• Publication Date: 21-Aug-2007
• Withdrawal Date: 21-Jul-2015
• ICS: 49.060 - Aerospace electric equipment and systems
• ICS: 49.090 - On-board equipment and instruments
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 22-Jul-2015
• Ref Project: SIST EN 3745-410:2007 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life

Relations

• Replaced By: EN 3745-410:2015 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life
• Effective Date: 29-Jul-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3745-410:2007
01-november-2007
$HURQDYWLND2SWLþQDYODNQDLQNDEOL]DXSRUDERY]UDþQLKSORYLOLK3UHVNXVQH
PHWRGHGHOäLYOMHQMVNDGREDSRGWHPSHUDWXUQLPYSOLYRP
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410:
Thermal life
Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil
410: Lebensdauer unter Temperatureinwirkung
Série aérospatiale - Fibres et câbles optiques a usage aéronautique - Méthodes d'essais
- Partie 410 : Durée de vie en température
Ta slovenski standard je istoveten z: EN 3745-410:2007
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 3745-410:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 3745-410
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2007
ICS 49.060

English Version
Aerospace series - Fibres and cables, optical, aircraft use - Test
methods - Part 410: Thermal life
Série aérospatiale - Fibres et câbles optiques à usage Luft- und Raumfahrt - Faseroptische Leitungen für
aéronautique - Méthodes d'essais - Partie 410 : Durée de Luftfahrzeuge - Prüfverfahren - Teil 410: Lebensdauer unter
vie en température Temperatureinwirkung
This European Standard was approved by CEN on 23 June 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3745-410:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 3745-410:2007 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Preparation of specimens.4
4 Apparatus .5
5 Method .5

2

---------------------- Page: 3 ----------------------

EN 3745-410:2007 (E)
Foreword
This document (EN 3745-410:2007) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2008, and conflicting national standards shall be withdrawn
at the latest by February 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Ge
...