iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN 4733-002

(Main)

Aerospace series - Rectangular optical connector, modular - Operating temperature 125 °C, for EN 4734 10X: MT contacts - Part 002: Performance specification

Aerospace series - Rectangular optical connector, modular - Operating temperature 125 °C, for EN 4734 10X: MT contacts - Part 002: Performance specification

This document defines permissive cables and materials used in the manufacturing of prEN 4733 003 module and EN 4734 10x optical MT contact.

Luft- und Raumfahrt - Optischer Rechtecksteckverbinder in modularer Bauweise, Betriebstemperatur 125 °C, für EN XXXX-10x-MT-Kontakte - Teil 002: Leistungsdaten

Série aérospatiale - Connecteur optique rectangulaire, modulaire - Température d'utilisation 125 °C, pour EN 4734-10X : contacts MT - Partie 002 : Spécification de performances

Le présent document définit les câbles et matériaux admissibles utilisés dans la fabrication d’un module EN 4733-003 et d’un contact optique MT EN 4734-10X.

Aeronavtika - Pravokotni optični konektor, modularni - Delovna temperatura 125 °C, za EN 4734 10X: MT kontakti - 002. del: Specifikacija delovanja - Tehnični podatki

General Information

Status
Not Published
Publication Date
18-May-2025
ICS
49.090 - On-board equipment and instruments
Technical Committee
ASD-STAN - Aerospace
Drafting Committee
ASD-STAN/D 2/S 10 - Optical
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
15-Feb-2024
Completion Date
15-Feb-2024
Ref Project
oSIST prEN 4733-002:2024 - Aerospace series - Rectangular optical connector, modular - Operating temperature 125 °C, for EN 4734 10X: MT contacts - Part 002: Performance specification

Buy Standard

prEN 4733-002:2024prEN 4733-002:2024
PreviousNext
Draft
prEN 4733-002:2024
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4733-002:2024
01-maj-2024
Aeronavtika - Pravokotni optični konektor, modularni - Delovna temperatura 125
°C, za EN 4734 10X: MT kontakti - 002. del: Specifikacija delovanja - Tehnični
podatki
Aerospace series - Rectangular optical connector, modular - Operating temperature 125
°C, for EN 4734 10X: MT contacts - Part 002: Performance specification
Luft- und Raumfahrt - Optischer Rechtecksteckverbinder in modularer Bauweise,
Betriebstemperatur 125 °C, für EN XXXX-10x-MT-Kontakte - Teil 002: Leistungsdaten
Série aérospatiale - Connecteur optique rectangulaire, modulaire - Température
d'utilisation 125 °C, pour EN 4734-10X : contacts MT - Partie 002 : Spécification de
performances
Ta slovenski standard je istoveten z: prEN 4733-002
ICS:
49.090 Oprema in instrumenti v On-board equipment and
zračnih in vesoljskih plovilih instruments
oSIST prEN 4733-002:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4733-002:2024

---------------------- Page: 2 ----------------------
oSIST prEN 4733-002:2024


DRAFT
EUROPEAN STANDARD
prEN 4733-002
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2023
ICS 49.090
English Version

Aerospace series - Rectangular optical connector, modular
- Operating temperature 125 °C, for EN 4734 10X: MT
contacts - Part 002: Performance specification
 Luft- und Raumfahrt - Optischer
Rechtecksteckverbinder in modularer Bauweise,
Betriebstemperatur 125 °C, für EN XXXX-10x-MT-
Kontakte - Teil 002: Leistungsdaten
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4733-002:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 4733-002:2024
prEN 4733-002:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Description and codification of compatible connectors (EN 4165) . 4
5 Operating conditions . 4
5.1 Optical performances . 4
5.2 Permissible cables . 4
5.3 Material .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 3375-009:2023(Main)
Aerospace series - Cable, electrical, for digital data transmission - Part 009: Single braid - CAN Bus - 120 ohms - Type WX - Product standard
SIST EN 3375-009:2023

This document specifies the required characteristics of single braid, 120 ohms, size 26, electrical cable type WX, UV laser markable, intended for digital data transmissions.
It is used together with EN 3375 001.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2591-509:2023(Main)
Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts
SIST EN 2591-509:2023

This document specifies methods of verifying adhesion of electrodeposited gold and gold alloy coatings on contacts.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2591-508:2023(Main)
Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts
SIST EN 2591-508:2023

This document specifies methods of measuring thickness of electro-deposited gold or gold alloys coatings on contacts of elements of connection.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3375-011:2022(Main)
Aerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star Quad 100 ohms - Lightweight - Type KL - Product standard
SIST EN 3375-011:2023

This document specifies the dimensions, tolerances, required characteristics and the mass of an AWG 24 shielded quad cable, type KL, intended for high speed (100 Mbit/s) full duplex Ethernet networks.
Linked to this particular application, the operating temperatures of the cable are between −65 °C and 125 °C.
This cable is laser markable, this marking satisfies the requirements of EN 3838.
The impedance is 100 Ω ± 15 Ω.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3375-001:2022(Main)
Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical specification
SIST EN 3375-001:2022

This document specifies the required characteristics, test methods, qualification and acceptance conditions of signal data transmission electrical cables.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3745-412:2022(Main)
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance
SIST EN 3745-412:2022

This document evaluates the resistance of the fiber optic cable to humidity changes at different
temperatures.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4641-301:2022(Main)
Aerospace series - Cables, optical 125 μm diameter cladding - Part 301: Tight structure 50/125 μm GI, fibre nominal 1,8 mm, outside diameter - Product standard
SIST EN 4641-301:2022

This document specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with a 50/125 μm Graded Index fibre core, 1,8 mm outside diameter for non pull-proof contact designs.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4533-001:2020(Main)
Aerospace series - Fibre optic systems - Handbook - Part 001: Termination methods and tools
SIST EN 4533-001:2020

1.1   General
Part 001 of EN 4533 examines the termination of optical fibre cables used in aerospace applications. Termination is the act of installing an optical terminus onto the end of a buffered fibre or fibre optic cable. It encompasses several sequential procedures or practices. Although termini will have specific termination procedures, many share common elements and these are discussed in this document. Termination is required to form an optical link between any two network or system components or to join fibre optic links together.
The fibre optic terminus features a precision ferrule with a tight tolerance central bore hole to accommodate the optical fibre (suitably bonded in place and highly polished). Accurate alignment with another (mating) terminus will be provided within the interconnect (or connector) alignment mechanism. As well as single fibre ferrules, it is noted that multi-fibre ferrules exist (e.g. the MT ferrule) and these will also be discussed in this part of the handbook.
Another technology used to connect 2 fibres is the expanded beam. 2 ball lenses are used to expand, collimate and then refocus the light from and to fibres. Contacts are not mated together. It helps reducing the wear between 2 contacts and allows more mating cycles. This technology is less sensitive to misalignments and dust. Losses are remaining more stable than butt joint contact even if the nominal loss is higher.
A Note on Terminology
Current terminology in the aerospace fibre optics community refers to an optical terminus or termini. The term optical contact may be seen in some documents and has a similar meaning. However, the term contact is now generally reserved for electrical interconnection pins. The optical terminus (or termini) is housed within an interconnect (connector is an equivalent term). Interconnects can be single-way or multi-way. The interconnect or connector will generally house the alignment mechanism for the optical termini (usually a precision split-C sleeve made of ceramic or metal). The reader should be aware of these different terms.
An optical link can be classified as a length of fibre optic cable terminated at both ends with fibre optic termini. The optical link provides the transmission line between any two components via the optical termini which are typically housed within an interconnecting device (typically a connector) with tight tolerancing within the alignment mechanisms to ensure a low loss light transmission.
Part 001 will explain the need for high integrity terminations, provide an insight into component selection issues and suggests best practice when terminating fibres into termini for high integrity applications. A detailed review of the termination process can be found in section 4 of this part and is organised in line with the sequence of a typical termination procedure.
The vast number of cable constructions and connectors available make defining a single termination instruction that is applicable to all combinations very difficult. Therefore, this handbook concentrates on the common features of most termination practices and defining best practice for current to near future applications of fibre optics on aircraft. This has limited the studies within this part to currently available ‘avionic’ silica fibre cables and adhesive filled butt-coupled type connectors. Many of the principles described however would still be applicable for other termination techniques. Other types of termination are considered further in the repair part of this handbook.
It is noted that the adhesive based pot-and-polish process is applicable to the majority of single-way fibre optic interconnects connectors and termini for multi-way interconnects and connectors. They share this commonality.
1.2   Need to high integrity terminations
(...)

  • Standard
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3745-404:2019(Main)
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock
SIST EN 3745-404:2019

This document specifies a method to determine the effects of thermal shock on an optical fibre or cable.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4660-003:2019(Main)
Aerospace series - Modular and Open Avionics Architectures - Part 003: Communications/Network
SIST EN 4660-003:2019

The purpose of this MOAA standard is to define a set of open architecture standards,
concepts & guidelines for Advanced Avionics Architectures (A3).
The three main goals for the MOAA Standards are:
— Reduced life cycle costs,
— Improved mission performance,
— Improved operational performance.
The MOAA standards are organised as a set of documents including:
— A set of agreed standards that describe, using a top down approach, the Architecture overview to all
interfaces required to implement the core within avionics system,
— The guidelines for system implementation through application of the standards.
This standard details the functionality and principle interfaces of an EN 4660 compliant network to
ensure the interoperability of Common Functional Modules and design guidelines to assist in
implementation of such a network.
The purpose of this standard is to establish by means of well defined interfaces and functionality, a
network design that is technology transparent and that is open to a multi-vendor market. Therefore,
specific data communication network topology, protocols and technologies are not identified in this
document.
Although the physical organisation and implementation of the network shall remain the System
Designers choice, in accordance with the best use of the current technology, it is necessary to define
interfaces and parameter sets in order to achieve a logical definition of the network with a defined
functionality. This definition includes:
— The generic functionality applicable to all networks.
— The logical interfaces to the Operating System and Module Support Layers.
— Optionally the physical interfaces to the Common Functional Modules (CFM).
This document identifies the principle interfaces for the Network, in Clause 4, and where appropriate,
provides requirements on network parameters to be defined.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day