EN ISO 11833-2:2006

Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)

Specifies requirements for sheets and films of unplasticized poly(vinyl chloride) (PVC-U) and the test methods to be used to measure the required values. It applies only to sheets of thickness less than 1,0 mm.

Kunststoffe - Weichmacherfreie Polyvinylchloridtafeln - Typen, Maße und Eigenschaften - Teil 2: Tafeln mit einer geringeren Dicke als 1 mm (ISO 11833-2:1998)

1.1 Dieser Teil von ISO 11833 legt die Anforderungen an Tafeln und Folien aus weichmacherfreiem
Polyvinylchlorid (PVC-U) und die zum Messen der geforderten Werte anzuwendenden Prüfverfahren fest.
1.2 Die Norm gilt für Tafeln/Folien mit einer geringeren Dicke als 1,0 mm.
1.3 Wärmeschrumpfende oder biaxial gereckte PVC-U-Tafeln und -Folien werden nicht berücksichtigt.

Plastiques - Feuilles en poly(chlorure de vinyle) non plastifié - Types, dimensions et caractéristiques - Partie 2: Feuilles et films d'épaisseur inférieure à 1 mm (ISO 11833-2:1998)

Polimerni materiali - Nemehčane polivinilkloride plošče - Vrste, mere in značilnosti 2. del: Plošče z debelino manj kot 1 mm (ISO 11833-2:1998)

General Information

• Status: Published
• Publication Date: 04-Apr-2006
• Withdrawal Date: 30-Oct-2006
• ICS: 83.140.10 - Films and sheets
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 05-Apr-2006
• Due Date: 19-May-2006
• Completion Date: 05-Apr-2006
• Ref Project: SIST EN ISO 11833-2:2006 - Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11833-2:2006
01-julij-2006
3ROLPHUQLPDWHULDOL1HPHKþDQHSROLYLQLONORULGHSORãþH9UVWHPHUHLQ]QDþLOQRVWL
GHO3ORãþH]GHEHOLQRPDQMNRWPP,62
Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and
characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)
Kunststoffe - Weichmacherfreie Polyvinylchloridtafeln - Typen, Maße und Eigenschaften
- Teil 2: Tafeln mit einer geringeren Dicke als 1 mm (ISO 11833-2:1998)
Plastiques - Feuilles en poly(chlorure de vinyle) non plastifié - Types, dimensions et
caractéristiques - Partie 2: Feuilles et films d'épaisseur inférieure a 1 mm (ISO 11833-
2:1998)
Ta slovenski standard je istoveten z: EN ISO 11833-2:2006
ICS:
83.140.10
SIST EN ISO 11833-2:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 11833-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2006
ICS 83.140.10

English Version
Plastics - Unplasticized poly(vinyl chloride) sheets - Types,
dimensions and characteristics - Part 2: Sheets of thickness less
than 1 mm (ISO 11833-2:1998)
Plastiques - Feuilles en poly(chlorure de vinyle) non Kunststoffe - Weichmacherfreie Polyvinylchloridtafeln -
plastifié - Types, dimensions et caractéristiques - Partie 2: Typen, Maße und Eigenschaften - Teil 2: Tafeln mit einer
Feuilles et films d'épaisseur inférieure à 1 mm (ISO 11833- geringeren Dicke als 1 mm (ISO 11833-2:1998)
2:1998)
This European Standard was approved by CEN on 16 March 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11833-2:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 11833-2:2006 (E)






Foreword



The text of ISO 11833-2:1998 has been prepared by Technical Committee ISO/TC 61 "Plastics”
of the International Organization for Standardization (ISO) and has been taken over as EN ISO
11833-2:2006 by Technical Committee CEN/TC 249 "Plastics", the secretariat of which is held
by IBN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by October 2006, and conflicting national
standards shall be withdrawn at the latest by October 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



Endorsement notice

The text of ISO 11833-2:1998 has been approved by CEN as EN ISO 11833-2:2006 without any
modifications.

2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 11833-2
First edition
1998-07-15
Plastics — Unplasticized poly(vinyl
chloride) sheets — Types, dimensions and
characteristics —
Part 2:
Sheets of thickness less than 1 mm
Plastiques — Feuilles en poly(chlorure de vinyle) non plastifié — Types,
dimensions et caractéristiques —
Partie 2: Feuilles et films d'épaisseur inférieure à 1 mm
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND USER
PURPOSES, DRAFT INTERNATIONAL STAND-
ARDS MAY ON OCCASION HAVE TO BE
CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
A
Reference number
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
ISO 11833-2:1998(E)

---------------------- Page: 4 ----------------------

ISO 11833-2:1998
...