EN 3312:2012

Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Forgings De ≤ 150 mm

This European Standard specifies the requirements relating to:
Titanium alloy Ti-6Al-4V
Annealed
Forgings
De < (+/-) 150 mm
for aerospace applications.

Luft- und Raumfahrt - Titanlegierung Ti-6Al-4V - Geglüht - Schmiedestücke - De ≤ 150 mm

Diese Norm legt die Anforderungen an 1) Titanlegierung Ti-6Al-4V Geglüht Schmiedestücke De <+/- 150 mm zur Anwendung in der Luft- und Raumfahrt fest.

Série aérospatiale - Alliage de titane Ti-6Al-4V - Recuit - Pièces forgées et pièces matricées - De ≤ 150 mm

Cette norme spécifie les exigences relatives à : )
Alliage de titane Ti-6Al-4V
Recuit
Pièces forgées et pièces matricées
De  150 mm
pour applications aérospatiales.

Aeronavtika - Titanova zlitina Ti-6Al-4V - Kaljena - Kovani izdelki De ≤ 150 mm

Ta evropski standard določa zahteve glede: kaljenih kovanih izdelkov iz titanove zlitine Ti-6Al-4V z De ≤ 150 mm za uporabo v aeronavtiki.

General Information

• Status: Published
• Publication Date: 07-Feb-2012
• Withdrawal Date: 30-Aug-2012
• ICS: 49.025.30 - Titanium
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 08-Feb-2012
• Completion Date: 08-Feb-2012
• Ref Project: SIST EN 3312:2012 - Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Forgings De ≤ 150 mm

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.PP49.025.30TitanTitaniumICS:Ta slovenski standard je istoveten z:EN 3312:2012SIST EN 3312:2012en,fr,de01-julij-2012SIST EN 3312:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3312
February 2012 ICS 49.025.30 English Version
Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Forgings De ≤ 150 mm
Série aérospatiale - Alliage de titane Ti-6Al-4V - Recuit - Pièces forgées et matricées - De ≤ 150 mm
Luft- und Raumfahrt - Titanlegierung Ti-6Al-4V - Geglüht - Schmiedestücke - De ≤ 150 mm This European Standard was approved by CEN on 23 December 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3312:2012: ESIST EN 3312:2012

Introduction This European Standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This European Standard has been prepared in accordance with EN 4500-4. SIST EN 3312:2012
...