EN ISO 12737:2010

Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2010)

ISO 12737:2010 specifies the ISO method for determining the plane-strain fracture toughness of homogeneous metallic materials using a specimen that is notched and precracked by fatigue, and subjected to slowly increasing crack displacement force.

Metallische Werkstoffe - Bestimmung der Bruchzähigkeit (ebener Dehnungszustand) (ISO 12737:2010)

Diese Internationale Norm legt das ISO-Verfahren zur Bestimmung der Bruchzähigkeit homogener
metallischer Werkstoffe im Fall des ebenen Dehnungszustands unter quasi-statischer Belastung fest. Dazu
werden gekerbte und mit einem Ermüdungsanriss versehene Proben einer langsam anwachsenden Rissöffnungskraft
ausgesetzt.

Matériaux métalliques - Détermination du facteur d'intensité de contrainte critique (ISO 12737:2010)

L'ISO 12737:2010 spécifie une méthode permettant de déterminer le facteur d'intensité de contrainte critique des matériaux métalliques homogènes sur une éprouvette entaillée et préfissurée par fatigue puis soumise à un écartement lent des lèvres de la fissure.

Kovinski materiali - Ugotavljanje lomne žilavosti pri ravninskem deformacijskem stanju (ISO 12737:2010)

Ta mednarodni standard določa metodo ISO za ugotavljanje lomne žilavosti pri ravninskem deformacijskem stanju homogenih kovinskih materialov z uporabo vzorca z utrujenostno zarezo in razpoko, ki se izpostavi počasi naraščajoči sili premika razpoke.

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-2010
• Withdrawal Date: 03-May-2012
• ICS: 77.040.10 - Mechanical testing of metals
• Technical Committee: ECISS/TC 101 - Test methods for steel (other than chemical analysis)
• Drafting Committee: ECISS/TC 101 - Test methods for steel (other than chemical analysis)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 04-May-2012
• Completion Date: 04-May-2012
• Ref Project: SIST EN ISO 12737:2011 - Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2010)

Relations

• Replaces: EN ISO 12737:2005 - Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2005)
• Effective Date: 23-Jan-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12737:2011
01-november-2011
1DGRPHãþD
SIST EN ISO 12737:2005
Kovinski materiali - Ugotavljanje lomne žilavosti pri ravninskem deformacijskem
stanju (ISO 12737:2010)
Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2010)
Metallische Werkstoffe - Bestimmung der Bruchzähigkeit (ebener Dehnungszustand)
(ISO 12737:2010)
Matériaux métalliques - Détermination du facteur d'intensité de contrainte critique (ISO
12737:2010)
Ta slovenski standard je istoveten z: EN ISO 12737:2010
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
SIST EN ISO 12737:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12737:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 12737:2011


EUROPEAN STANDARD
EN ISO 12737

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2010
ICS 77.040.10 Supersedes EN ISO 12737:2005
English Version
Metallic materials - Determination of plane-strain fracture
toughness (ISO 12737:2010)
Matériaux métalliques - Détermination du facteur d'intensité Metallische Werkstoffe - Bestimmung der Bruchzähigkeit
de contrainte critique (ISO 12737:2010) (ebener Dehnungszustand) (ISO 12737:2010)
This European Standard was approved by CEN on 4 October 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12737:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12737:2011
EN ISO 12737:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 12737:2011
EN ISO 12737:2010 (E)
Foreword
This document (EN ISO 12737:2010) has been prepared by Technical Committee ISO/TC 164 "Mechanical
testing of metals" in collaboration with Technical Committee ECISS/TC 101 “Test methods for steel (other
than chemical analysis)” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at
the latest by June 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12737:2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 12737:2010 has been approved by CEN as a EN ISO 12737:2010 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 12737:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 12737:2011

INTERNATIONAL ISO
STANDARD 12737
Third edition
2010-12-15


Metallic materials — Determination
of plane-strain fracture toughness
Matériaux métalliques — Détermination du facteur d'intensité
de contrainte critique





Reference number
ISO 12737:2
...