Preformed plasterboard cornices - Definitions, requirements and test methods

This European Standard specifies the characteristics and performance of preformed plasterboard cornices intended to be used in building construction works either as part of the original specification or subsequently for improved decorative enrichment of the wall/ceiling angle in rooms.
This standard covers the performance characteristics: reaction to fire and flexural strength.
This standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Construction Industry and the reference tests for these characteristics.
It provides the assessment and verification of constancy of performance of the products.
This standard does not cover plain plaster and gypsum fibrous plasterwork cornices.

Hohlkehlleisten aus kartonummanteltem Gips - Begriffe, Anforderungen und Prüfverfahren

Diese Europäische Norm legt die Eigenschaften und Leistung von Hohlkehlleisten aus kartonummanteltem Gips fest, die im Hochbau entweder im Rahmen der ursprünglichen Leistungsbeschreibung oder zur nachträglichen dekorativen Gestaltung des Wand-/Deckenabschlusses in Räumen verwendet werden.
Diese Norm behandelt die Leistungsmerkmale Brandverhalten und Biegezugfestigkeit.
Diese Norm behandelt darüber hinaus zusätzliche technische Eigenschaften, die für die Anwendung und Akzeptanz des Produkts durch die Bauwirtschaft von Bedeutung sind, und enthält die Referenzprüfverfahren für diese Eigenschaften.
Sie enthält Festlegungen zur Bewertung und Überprüfung der Leistungsbeständigkeit der Produkte.
Diese Norm gilt weder für Hohlkehlleisten aus Gips ohne Kartonummantelung noch für Hohlkehlleisten aus faserverstärktem Gips.

Corniches préformées en plâtre revêtues de carton - Définitions, exigences et méthodes d’essai

La présente Norme européenne définit les caractéristiques et les performances des corniches préformées en plâtre revêtues de carton destinées à être utilisées dans les ouvrages de construction, soit conformément au cahier des charges lui-même, soit postérieurement, en vue d’embellir la décoration intérieure des pièces au droit des angles formés par les murs et les plafonds.
La présente norme couvre les caractéristiques de performance suivantes : réaction au feu et résistance à la flexion.
La présente Norme européenne couvre également des caractéristiques techniques complémentaires qui revêtent une importance pour l’utilisation et l’acceptation du produit par l’industrie de la construction, ainsi que les essais de référence pour ces caractéristiques.
La présente norme spécifie l'évaluation et la vérification de la constance des performances des produits.
Elle ne s’applique pas aux corniches qui ne sont pas revêtues de carton ni aux corniches en staff.

Predoblikovane mavčne plošče - Definicije, zahteve in preskusne metode

Ta evropski standard določa lastnosti in zmogljivost predoblikovanih mavčnih plošč, namenjenih za uporabo pri gradnji gradbenih objektov kot del izvirne specifikacije ali pozneje kot dekorativna izboljšava stenskega/stropnega kota v prostorih.
Ta standard zajema lastnosti delovanja: odziv na ogenj in upogibna trdnost.
Ta standard zajema tudi dodatne tehnične značilnosti, ki so pomembne pri uporabi in sprejemljivosti proizvoda s strani gradbene industrije, ter referenčne preskuse za te lastnosti.
Omogoča ocenjevanje in preverjanje nespremenljivosti zmogljivosti proizvodov.
Ta standard ne zajema navadnih mavčnih plošč in mavčnih plošč z vlakni.

General Information

Status
Published
Publication Date
04-Jul-2017
Withdrawal Date
29-Apr-2019
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
04-Mar-2023
Completion Date
04-Mar-2023

Relations

Buy Standard

Standard
EN 14209:2017
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HWRGHHohlkehlleisten aus kartonummanteltem Gips - Begriffe, Anforderungen und PrüfverfahrenCorniches préformées en plâtre revêtues de carton - Définitions, exigences et méthodes d’essaiPreformed plasterboard cornices - Definitions, requirements and test methods91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:Ta slovenski standard je istoveten z:EN 14209:2017SIST EN 14209:2017en,fr,de01-september-2017SIST EN 14209:2017SLOVENSKI
STANDARDSIST EN 14209:20061DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14209
July
t r s y ICS
{ sä s r rä s r Supersedes EN
s v t r {ã t r r wEnglish Version
Preformed plasterboard cornices æ Definitionsá requirements and test methods Corniches préformées en plâtre revêtues de carton æ Définitionsá exigences et méthodes d 5essai
Hohlkehlleisten aus kartonummanteltem Gips æ Begriffeá Anforderungen und Prüfverfahren This European Standard was approved by CEN on
t { July
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s v t r {ã t r s y ESIST EN 14209:2017

Sampling procedure for testing . 13 A.1 General . 13 A.2 Sampling procedure . 13 Annex B (normative)
Mounting and fixing in the test according to EN 13823 (SBI test) . 14 Annex ZA (informative)
Relationship of this European Standard with Regulation (EU) No.305/2011 . 15 ZA.1 Scope and relevant characteristics . 15 ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) . 15 ZA.3 Assignment of AVCP tasks . 16 Bibliography . 18
Figure 1 — Example of profile 3.2 Symbols and abbreviations Table 1 — Symbols and abbreviations Requirement Sub-clause Symbol or abbreviation Reaction to fire 4.1 R2F Flexural strength 4.2 F Dangerous substances 4.3 DS 4 Requirements 4.1 Reaction to fire Where subject to regulatory requirements, preformed plasterboard cornices shall be tested and classified in accordance with EN 13501-1. Preformed plasterboard cornices tested according to EN 13823 (SBI test) shall be mounted and fixed in accordance with Annex B or when the manufacturer wishes to claim performance for a specific intended use, the mounting and fixing shall be representative of that intended use. 4.2 Flexural strength (expressed as bending behaviour) Individual lengths shall be capable of being handled and installed using recommended practice. When tested in accordance with 5.4, the cornice shall not fracture. SIST EN 14209:2017

4.4 Composition Preformed plasterboard cornices shall have constituents common to gypsum plasterboard to EN 520. The paper shall be suitable to receive decoration or be pre-finished. The abutting paper edges on the back of the cornice are, usually, concealed and secured by a self-adhesive paper tape. The core may contain additives, aggregates and/or fibres. 4.5 Profile and dimensions 4.5.1 General Preformed plasterboard cornices are manufactured in a variety girths, lengths and profiles to the producer's declared nominal dimensions. The lettering in the sub-clauses below refers to Figure 1. 4.5.2 Profile Preformed plasterboard cornices shall be manufactured to provide a continuous section of regular profile and thickness to permit, subsequently, cut lengths to match their shape and thickness w
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.