EN 14353:2017

Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods

This European Standard specifies the characteristics and performance of metal beads, metal beads combined with paper tape and metal feature profiles designed for use in systems made with gypsum plasterboards according to EN 520, gypsum boards with fibrous reinforcement according to EN 15283-1 and EN 15283-2 and products from secondary processing according to EN 14190, gypsum board thermal/acoustic insulation composite panels according to EN 13950 and prefabricated gypsum board panels with a cellular paperboard core according to EN 13915, intended to be used in building construction works. Metal beads and feature profiles, depending upon their material and type, can be featured without decoration, decorated or finished with jointing compounds to receive decoration.
It covers the following performance characteristics: reaction to fire and flexural strength (bending behaviour) to be measured according to the corresponding European test methods.
It provides the assessment and verification of constancy of performance of the products
This European Standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the construction industry and the reference tests for these characteristics.

Hilfs- und Zusatzprofile aus Metall zur Verwendung mit Gipsplatten - Begriffe, Anforderungen und Prüfverfahren

Diese Europäische Norm legt die Eigenschaften und Leistung von Hilfsprofilen, mit Kartonstreifen kombinierten Hilfsprofilen sowie Zusatzprofilen aus Metall fest, die für die Verwendung in Systemen, die mit Gipsplatten nach EN 520, faserverstärkten Gipsplatten nach EN 15283-1 und EN 15283-2, Produkten aus der Weiterverarbeitung nach EN 14190, Gips-Verbundplatten zur Wärme- und Schalldämmung nach EN 13950 bzw. Gipsplatten-Wandbaufertigtafeln mit einem Kartonwabenkern nach EN 13915 hergestellt werden und für die Verwendung in Gebäuden bestimmt sind. Hilfs- und Zusatzprofile aus Metall können, abhängig von Material und Typ, sowohl mit als auch ohne Oberflächenend¬behandlung eingebaut werden oder mit Fugenspachtel-Material fertig zum Streichen oder Tapezieren eingespachtelt werden.
Sie behandelt die Leistungsmerkmale Brandverhalten und Biegezugfestigkeit (Biegever¬halten), die mit den entsprechenden europäischen Prüfverfahren zu bestimmen sind.
Sie enthält Festlegungen zur Bewertung und Überprüfung der Leistungsbeständigkeit der Produkte.
Diese Europäische Norm behandelt darüber hinaus zusätzliche technische Eigenschaften, die für die Anwendung und Akzeptanz des Produkts durch die Bauwirtschaft von Bedeutung sind, und enthält die Referenzprüfverfahren für diese Eigenschaften.

Cornières et profilés métalliques pour plaques de plâtre - Définitions, exigences et méthodes d’essai

La présente Norme européenne spécifie les caractéristiques et les performances requises pour les cornières métalliques, les cornières métalliques comportant des bandes de papier et les profilés métalliques destinés à être utilisés dans les ouvrages en plaques de plâtre selon l’EN 520, les plaques de plâtre armées de fibres selon l’EN 15283 1 et l’EN 15283 2 et les produits de transformation secondaire selon l’EN 14190, les complexes d’isolation thermique/acoustique en plaques de plâtre et isolant selon l’EN 13950 et les panneaux de cloison préfabriqués en plaques de plâtre à âme cellulaire en carton selon l’EN 13915, destinés à être utilisés dans des ouvrages de construction. Selon leur matériau de composition et leur type, les cornières et les profilés métalliques peuvent être décorés ou non décorés ou revêtus par des enduits de joint avant décoration.
Elle couvre les caractéristiques de performance suivantes : la réaction au feu et la résistance à la flexion (comportement en flexion) qui doivent être mesurées selon les méthodes d’essai européennes correspondantes.
Elle spécifie l'évaluation et la vérification de la constance des performances des produits.
Elle couvre également les caractéristiques techniques supplémentaires qui sont importantes en vue de l’utilisation et de l’acceptation du produit par l’industrie du bâtiment ainsi que les essais de référence de ces caractéristiques.

Pomožni in dodatni kovinski profili za mavčne plošče - Definicije, zahteve in preskusne metode

Ta evropski standard določa lastnosti in zmogljivost pomožnih kovinskih profilov, pomožnih kovinskih profilov, kombiniranih s papirnatimi trakovi, in dodatnih kovinskih profilov, zasnovanih za uporabo v sistemih iz mavčnih plošč v skladu s standardom EN 520, mavčnih plošč, ojačanih z vlakni, v skladu s standardoma EN 15283 1 in EN 15283 2 ter proizvodov iz sekundarne obdelave v skladu s standardom EN 14190, toplotnih/zvočnih izolacijskih kompozitnih panelov za mavčne plošče v skladu s standardom EN 13950 in predizdelanih mavčnih plošč s celičastim jedrom v skladu s standardom EN 13915, namenjenih za uporabo pri gradnji gradbenih objektov. Pomožni in dodatni kovinski profili, odvisno od materiala in vrste, se lahko uporabljajo brez dekoracije, z dekoracijo ali zaključeni s tesnilnimi materiali, namenjenimi za dekoracijo.
Zajema naslednje lastnosti delovanja, ki jih je treba meriti v skladu z ustreznimi evropskimi preskusnimi metodami: odziv na ogenj in upogibna trdnost (obnašanje pri upogibu).
Omogoča ocenjevanje in preverjanje nespremenljivosti zmogljivosti proizvodov
Ta evropski standard zajema tudi dodatne tehnične lastnosti, ki so pomembne pri uporabi in sprejemljivosti proizvoda s strani gradbene industrije, in referenčne preskuse za te lastnosti.

General Information

• Status: Published
• Publication Date: 04-Jul-2017
• Withdrawal Date: 29-Apr-2019
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: CEN/TC 241 - Gypsum and gypsum based products
• Drafting Committee: CEN/TC 241/WG 3 - Board products
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 04-Mar-2023
• Completion Date: 04-Mar-2023
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/106 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on gypsum products
• Ref Project: SIST EN 14353:2017 - Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods

Relations

• Replaces: EN 14353:2007+A1:2010 - Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods
• Effective Date: 07-Oct-2015

Overview - EN 14353:2017 (Metal beads & feature profiles for gypsum plasterboards)

EN 14353:2017 is the CEN European Standard that defines definitions, requirements and test methods for metal beads, metal beads combined with paper tape, and metal feature profiles used with gypsum plasterboard systems. It covers products for use with gypsum plasterboards (EN 520), fibre‑reinforced gypsum boards (EN 15283‑1/2), secondary‑processed boards (EN 14190), thermal/acoustic composite panels (EN 13950) and prefabricated cellular paper‑core panels (EN 13915). The standard sets performance characteristics, required tests and the procedures for assessment and verification of constancy of performance (AVCP).

Key topics and technical requirements

• Scope & definitions: Types covered include angle beads, edge beads, feature beads, stop beads, corner tape, expansion and movement beads, wings and fins.
• Performance characteristics:
  • Reaction to fire - uncoated metal components are considered Euroclass A1 (no contribution to fire); products containing organic materials may be classified E without testing in limited exposure cases. Other classes require testing to EN 13501‑1.
  • Flexural strength / bending behaviour - profiles must show no fracture, kinks or permanent local deformation when tested (see clause 5.7).
  • Release of dangerous substances - national requirements apply; declarations may be required where harmonized test methods are absent.
• Materials & coatings:
  • Steel products to standards such as EN 10346, EN 10152; aluminium to EN 485‑2 / EN 485‑4.
  • Protective coating classes specified (examples: Z275, Z140, AZ150, ZA130); corner tapes may require at least 48 h salt spray resistance (EN ISO 9227) or ZE classes (ZE50/50, ZE75/75, ZE100/100).
• Ancillary requirements: paper facing for corner tape must be compatible with jointing compounds (EN 13963) and have minimum breaking strength 4.0 N/mm (tested to EN ISO 1924‑2).
• Testing & conformity: sampling, dimensional checks, bending tests and specific test methods are detailed (clauses 5.x). AVCP procedures, type testing and factory production control (FPC) requirements are included (clause 6).

Applications - who uses EN 14353:2017

• Manufacturers of metal beads, corner tapes and feature profiles for gypsum board systems.
• Architectural and construction specifiers ensuring product suitability for fire, durability and mechanical performance.
• Test laboratories performing conformity tests (bending, salt spray, paper tensile).
• Certification bodies and regulators applying AVCP and product marking/packaging rules.

Related standards

• EN 520, EN 13963, EN 13501‑1, EN 15283‑1/2, EN 10346, EN 10152, EN 485‑2, EN ISO 1924‑2, EN ISO 9227.

By following EN 14353:2017, stakeholders ensure consistent quality, predictable mechanical behaviour and regulatory alignment for metal beads and feature profiles used in gypsum plasterboard construction. Keywords: EN 14353:2017, metal beads, feature profiles, gypsum plasterboards, test methods, reaction to fire, flexural strength, AVCP.

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hilfs- und Zusatzprofile aus Metall zur Verwendung mit Gipsplatten - Begriffe, Anforderungen und PrüfverfahrenCornières et profilés métalliques pour plaques de plâtre - Définitions, exigences et méthodes d’essaiMetal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:Ta slovenski standard je istoveten z:EN 14353:2017SIST EN 14353:2017en,fr,de01-september-2017SIST EN 14353:2017SLOVENSKI
STANDARDSIST EN 14353:2008+A1:20101DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14353
July
t r s y ICS
{ sä s r rä s r Supersedes EN
s v u w uã t r r y ªA sã t r s rEnglish Version
Metal beads and feature profiles for use with gypsum plasterboards æ Definitionsá requirements and test methods Cornières et profilés métalliques pour plaques de plâtre æ Définitionsá exigences et méthodes d 5essai
Hilfsæ und Zusatzprofile aus Metall zur Verwendung mit Gipsplatten æ Begriffeá Anforderungen und Prüfverfahren This European Standard was approved by CEN on
t { July
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s v u w uã t r s y ESIST EN 14353:2017

Sampling procedure for testing . 21 A.1 General . 21 A.2 Sampling procedure . 21 Annex ZA (informative)
Relationship of this European Standard with Regulation (EU) No.305/2011 . 23 ZA.1 Scope and relevant characteristics . 23 ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) . 23 ZA.3 Assignment of AVCP tasks . 23 Bibliography . 26
1) See Commission Decision 96/603/EC, as amended. 2) See Commission Delegated Regulation (EU) No 1293/2014 SIST EN 14353:2017

4.4 Additional technical requirements 4.4.1 Materials Metal beads and feature profiles shall be manufactured from steel strip conforming to EN 10143 and EN 10346 or EN 10152. Alternatively, the metal strips for the corner tape strips may be manufactured from steel according to EN 10139 with a coating according to EN 10152 (for ZE coating) or to EN 10346 (for Z or AZ coating). Aluminium beads and featured profiles shall be manufactured according to EN 485-2 and EN 485-4. 4.4.2 Paper specifications The paper used to face corner tape shall be compatible with jointing compounds to EN 13963 and have a minimum breaking strength of 4,0 N/mm, when tested in accordance with 5.6. 4.5 Protective coating Metal beads manufactured from steel strip shall have a protective coating conforming to one of the following standards: EN 10346 or EN 10152 (for corner tape only). The protective coating shall conform to one of the classes given in Table 2 or alternatively in Table 3 (for angle beads and corner tapes only). Table 2 — Classes of protective coating for angle beads and corner tapes Class Normative reference Z275 EN 10346 Z140 EN 10346 Z100 EN 10346 ZA130 EN 10346 ZA095 EN 10346 AZ150 EN 10346 AZ100 EN 10346 SIST EN 14353:2017

W min = 18 mm
D = (1,5 ± 0,5) mm A = 85° ± 2° L = length 1
Stop bead
W min = 18 mm L = length
X = t + (1,5 ± 0,5) mm t = board thickness 2 a: t = 9,5 mm d: t = 18 mm b: t = 12,5 mm e: t = 20 mm c: t = 15 mm f: t = 25 mm (See NOTE) Feature bead 1
W1 min = 15 mm W2 min = 20 mm L = length
X = t + (1,5 ± 0,5) mm t = board thickness 3 a: t = 9,5 mm d:t = 18 mm b: t = 12,5 mm e : t = 20 mm c: t = 15 mm f: t = 25 mm (See NOTE) Feature bead 2
W1 min = 15 mm W2 min = 20 mm L = length
X = t + (1,5 ± 0,5) mm t = board thickness 4 a: t = 9,5 mm d: t = 18 mm b: t = 12,5 mm e: t = 20 mm c: t = 15 mm f: t = 25 mm (See NOTE) Edge bead
W min = 20 mm A = 5° ± 0,5° L = length
X = t + (1,5 ± 0,5) mm t = board thickness 5 a: t = 9,5 mm d: t = 18 mm b: t = 12,5 mm e: t = 20 mm c: t = 15 mm f: t = 25 mm (See NOTE) Corner tape 1
Key 1 paper 2 steel strip W min = 50 mm GS = 11,7 ± 1,2 mm G = 1,6 ± 0,5 mm L = length 6/1 – with gap or 6/2 – with rolled groove
Key 1 paper 2 aluminium strip W min = 50 mm AL = 11,7 ± 1,2 mm G = 1,6 ± 0,5 mm L = length 7/1 – with gap
or 7/2 – with rolled groove
Expansion bead
W min = 45 mm G = 3 mm X = (9 ± 0,025) mm L = length 8 Allows movement of at least: ± 3 mm Movement bead
W1 = 70 mm W2 = 45 mm G = 15 mm L = length X = t + (1,5 ± 0,5) mm t = board thickness 9 a: t = 9,5 mm b: t = 12,5 mm c: t = 15 mm Allows movement of at least: + 5 mm/- 2 mm NOTE a, b, c, d, e, f are designations given to section indicating compatibility to board thickness (ranging from 9,5 mm to 25 mm). 4.7.2 Thickness of metal The thickness of the metal shall be measured as described in 5.2.1 and compared with the nominal thickness and tolerances given in: — EN 10143 for continuously hot-dip coated steel sheet and strip according to EN 10346 continuously hot-dip coated steel flat products; — EN 10140 for cold rolled steel strip according to EN 10139 cold rolled uncoated mild steel narrow steel strip for cold forming; — EN 10131 for cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming according to EN 10152 electrolytically zinc coated cold rolled steel flat products for cold forming. The uncoated steel strip shall have a minimum thickness of 0,35 mm for galvanized and AZ/ZA coated steel and 0,4 mm for aluminium. Corner bead tape strips shall be manufactured with a minimum coated thickness of 0,24 mm. The uncoated steel strip is calculated as nominal thickness minus tolerance and thickness of the protective coating. The thickness of the coating shall be obtained from EN 10346 or EN 10152, when appropriate. 4.7.3 Length The length shall be measured as described in 5.2.2 and compared with the nominal length. SIST EN 14353:2017
...