Bituminous binders - Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate

This Technical Specification specifies a method for the determination of the breaking and immediate adhesivity behaviour of cationic bituminous emulsions in contact with an aggregate. The method applies to emulsions used for surface dressing applications and can be used for formulation and production control purposes.
WARNING The use of this Technical Specification may involve hazardous materials, operations and equipment. This Technical Specification does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this Technical Specification to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Bitumen und bitumenhaltige Bindemittel - Bestimmung der Brechzeit und des kurzfristigen Haftverhaltens von kationischen Bitumenemulsionen mit Gesteinskörnung 2/4 mm

Diese Technische Spezifikation legt ein Verfahren zur Bestimmung der Brechzeit und des kurzfristigen Haftverhaltens von kationischen Bitumenemulsionen im Kontakt mit einer Gesteinskörnung fest. Dieses Verfahren gilt für Emulsionen, die für Oberflächenbehandlungen angewendet werden, und kann für die Rezeptur und für Produktionskontrollzwecke herangezogen werden.
WARNUNG — Die Anwendung dieser Technischen Spezifikation kann den Umgang mit gefährlichen Substanzen und Aus¬rüstungsteilen und die Ausführung gefährlicher Arbeitsgänge einschließen. Diese Technische Spezifikation erhebt nicht den Anspruch, alle mit ihrer Anwendung verbundenen Sicherheitsprobleme anzusprechen. Es liegt in der Verantwortung des Anwenders dieser Technischen Spezifikation, geeignete Verhaltensregeln für den Arbeits- und Gesundheitsschutz festzulegen und vor der Anwendung zu klären, ob einschränkende Vorschriften zu berücksichtigen sind.

Bitumes et liants bitumineux - Détermination du comportement à la rupture et de l’adhésivité immédiate des émulsions cationiques de bitume avec un granulat de 2/4 mm

La présente Spécification Technique européenne décrit une méthode permettant de déterminer le
comportement de rupture et d'adhésivité immédiate des émulsions de bitume cationiques en contact avec un
granulat. Cette méthode s'applique aux émulsions utilisées pour les applications d’enduisage et peut être
utilisée pour la formulation et le contrôle de la production.
AVERTISSEMENT — L'utilisation de la présente Spécification Technique peut impliquer l'intervention
de produits, d'opérations et d'équipements à caractère dangereux. La présente Spécification
Technique n'est pas censée aborder tous les problèmes de sécurité concernés par son usage. Il est
de la responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène
appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.

Bitumen in bitumenska veziva - Ugotavljanje stopnje stabilnosti in neposredne obstojnosti kationskih bitumenskih emulzij z 2/4 mm agregati

Ta tehnična specifikacija opredeljuje metodo za ugotavljanje stopnje stabilnosti in neposredne obstojnosti kationskih bitumenskih emulzij v stiku z agregatom. Ta metoda velja za emulzije, ki se uporabljajo pri nanašanju na površine in jih je mogoče uporabiti za namene nadzora sestave in pridobivanja. OPOZORILO – pri uporabi te tehnične specifikacije so lahko prisotni nevarni materiali, postopki in oprema. Ta tehnična specifikacija ne obravnava vseh varnostnih težav, ki se nanašajo na njeno uporabo. Za vzpostavitev ustreznih varnostnih in zdravstvenih praks ter za določitev uporabnosti regulativnih omejitev pred uporabo je odgovoren uporabnik te tehnične specifikacije.

General Information

Status
Withdrawn
Publication Date
02-Oct-2012
Withdrawal Date
12-Dec-2023
Current Stage

Relations

Buy Standard

Technical specification
TS CEN/TS 16346:2012
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2012
Bitumen in bitumenska veziva - Ugotavljanje stopnje stabilnosti in neposredne
obstojnosti kationskih bitumenskih emulzij z 2/4 mm agregati
Bituminous binders - Determination of breaking behaviour and immediate adhesivity of
cationic bituminous emulsions with 2/4 mm aggregate
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Brechzeit und des
kurzfristigen Haftverhaltens von kationischen Bitumenemulsionen mit Gesteinskörnung
2/4 mm
Bitumes et liants bitumineux - Détermination du comportement à la rupture et de
l’adhésivité immédiate des émulsions cationiques de bitume avec un granulat de 2/4 mm
Ta slovenski standard je istoveten z: CEN/TS 16346:2012
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL SPECIFICATION
CEN/TS 16346
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
October 2012
ICS 75.140; 91.100.50
English Version
Bituminous binders - Determination of breaking behaviour and
immediate adhesivity of cationic bituminous emulsions with 2/4
mm aggregate
Bitumes et liants bitumineux - Détermination du Bitumen und bitumenhaltige Bindemittel - Bestimmung der
comportement à la rupture et de l'adhésivité immédiate des Brechzeit und des kurzfristigen Haftverhaltens von
émulsions cationiques de bitume avec un granulat de 2/4 kationischen Bitumenemulsionen mit Gesteinskörnung 2/4
mm mm
This Technical Specification (CEN/TS) was approved by CEN on 25 March 2012 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16346:2012: E
worldwide for CEN national Members.

Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Principle .5
5 Reagents and material .5
6 Apparatus .5
7 Sampling .5
8 Procedure .5
9 Expression of results .6
10 Precision .7
11 Test report .7
Annex A (normative) Guidance for the marking of coated surface area .8
Bibliography .9

Foreword
This document (CEN/TS 16346:2012) has been prepared by Technical Committee CEN/TC 336 “Bitumimous
Binders”, the secretariat of which is held by AFNOR/BN Pétrole.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
1 Scope
This Technical Specification specifies a method for the determination of the breaking and immediate
adhesivity behaviour of cationic bituminous emulsions in contact with an aggregate. The method applies to
emulsions used for surface dressing applications and can be used for formulation and production control
purposes.
WARNING — The use of this Technical Specification may involve hazardous materials, operations and
equipment. This Technical Specification does not purport to address all of the safety problems
associated with its use. It is the responsibility of the user of this Technical Specification to establish
appropriate safety and health practices and to determine the applicability of regulatory limitations
prior to use.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 58, Bitumen and bituminous binders – Sampling bituminous binders
EN 1259
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.