iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 10723:2002/AC:2004

(Corrigendum)

Natural gas - Performance evaluation for on-line analytical systems (ISO 10723:1995, including Technical Corrigendum 1:1998)

Natural gas - Performance evaluation for on-line analytical systems (ISO 10723:1995, including Technical Corrigendum 1:1998)

CMC - Including Technical Corrigendum 1 added in title and foreword

Erdgas - Bewertung der Leistungsfähigkeit von On-line-Analysensystemen (ISO 10723:1995, einschließlich Technische Korrektur 1:1998)

Gaz naturel - Evaluation des performances des systèmes d'analyse en ligne (ISO 10723:1995, Rectificatif Technique 1:1998 inclus)

Zemeljski plin – Vrednotenje zmogljivosti “on-line” analitskih sistemov (ISO 10723:1995 - Tehnični popravek 1:1998)

General Information

Status
Withdrawn
Publication Date
21-Sep-2004
ICS
75.060 - Natural gas
Technical Committee
CEN/SS N21 - Gaseous fuels and combustible gas
Drafting Committee
CEN/SS N21 - Gaseous fuels and combustible gas
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Dec-2012
Completion Date
01-Dec-2012
Ref Project
SIST EN ISO 10723:2002/AC:2004 - Natural gas - Performance evaluation for on-line analytical systems (ISO 10723:1995, including Technical Corrigendum 1:1998)

Relations

Replaced By
EN ISO 10723:2012 - Natural gas - Performance evaluation for analytical systems (ISO 10723:2012)
Effective Date
26-Dec-2012
Corrects
EN ISO 10723:2002 - Natural gas - Performance evaluation for on-line analytical systems (ISO 10723:1995, including Technical Corrigendum 1:1998)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 10723:2002/AC:2004EN ISO 10723:2002/AC:2004
PreviousNext
Corrigendum
EN ISO 10723:2002/AC:2004
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Erdgas - Bewertung der Leistungsfähigkeit von On-line-Analysensystemen (ISO 10723:1995, einschließlich Technische Korrektur 1:1998)Gaz naturel - Evaluation des performances des systemes d'analyse en ligne (ISO 10723:1995, Rectificatif Technique 1:1998 inclus)Natural gas - Performance evaluation for on-line analytical systems (ISO 10723:1995, including Technical Corrigendum 1:1998)75.060Zemeljski plinNatural gasICS:Ta slovenski standard je istoveten z:EN ISO 10723:2002/AC:2004SIST EN ISO 10723:2002/AC:2004en01-december-2004SIST EN ISO 10723:2002/AC:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 10723:2002/ACSeptember 2004Septembre 2004September 2004ICS 75.060English versionVersion FrançaiseDeutsche FassungNatural gas - Performance evaluation for on-line analytical systems (ISO10723:1995)Gaz naturel - Evaluation des performancesdes systèmes d'analyse en ligne (ISO10723:1995)Erdgas - Bewertung der Leistungsfähigkeitvon On-line-Analysensystemen (ISO10723:1995)This corrigendum becomes effective on 22 September 2004 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 22 septembre 2004 pour incorporation dans les trois versionslinguistiques officielles de la EN.Die Berichtigung tritt am 22.September 2004 zur Einarbeitung in die drei offiziellen Sprachfassungender EN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN ISO 10723:2002/AC:2004 D/E/FSIST EN ISO 10723:2002/AC:2004

EN ISO 10723:2003/AC:2004 (E/F/D)
2 English version
The title on the title page has to read as follows:
Natural gas - Performance evaluation for on-line analytical systems (ISO 10723:1995, including Technical Corrigendum 1:1998)
The last paragraph of the foreword has to be replaced as follows:
The text of ISO 10723:1995, including Technical Corrigendum 1:1998, has been approved by CEN as EN ISO 10723:2002 without any modifications.
Version française
Le titre sur la page de titre doit être le suivant:
Gaz na
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 2615:2024(Main)
Analysis of natural gas - Biomethane - Determination of the content of compressor oil (ISO 2615:2024)
SIST EN ISO 2615:2024

This document gives general guidance for the sampling and gas chromatographic analysis of compressor oil in biomethane or compressed natural gas (CNG). The compressor oil mass fraction is determined by sampling on coalescing filters under defined operational conditions (the two first cubic meters of gas referring to standard conditions, delivered at a refuelling station).
Compressor oils are lubricants used in mechanical devices where the purpose is to reduce the volume and increase the pressure of gases for use in a variety of applications.
The method is solely applicable to compressed gas (p>18 MPa).
The compressor oil content is expressed as mass fraction. The scope of this method is from 3 mg/kg – 30 mg/kg.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2611-1:2024(Main)
Analysis of natural gas - Halogen content of biomethane - Part 1: HCl and HF content by ion chromatography (ISO 2611-1:2024)
SIST EN ISO 2611-1:2024

This document specifies a method for the determination of the concentration of hydrochloric acid (HCl) and hydrofluoric acid (HF) in biomethane, after absorption on an alkali-impregnated quartz fibre filtre or in a sorbent trap, by ion chromatography (IC) with conductimetric detection.
The method is applicable to biomethane for concentration levels for HCl from 0,07 mg/m3 to 35 mg/m3 and for HF from 0,07 mg/m3 to 20 mg/m3.
Unless stated otherwise, all concentrations in this document are given under standard reference conditions (see ISO 13443). Other conditions can be applied.
This method is also applicable to biogas. This method is intended to support conformity assessment of biomethane and biogas according to specifications, such as the EN 16723 series.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2620:2024(Main)
Analysis of natural gas - Biomethane - Determination of VOCs by thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (ISO 2620:2024)
SIST EN ISO 2620:2024

This document describes a method for sampling and analysis of volatile organic compounds (VOCs), including siloxanes, terpenes, organic sulfur compounds, in natural gas and biomethane matrices, using thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (TD-GC-FID/MS).

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2612:2023(Main)
Analysis of natural gas - Biomethane - Determination of ammonia content by Tuneable Diode Laser Absorption Spectroscopy (ISO 2612:2023)
SIST EN ISO 2612:2024

This document describes several test methods for measuring the ammonia amount fraction in natural gas and biomethane at the trace level (µmol mol-1). The suitable handling and sampling of pressurised mixtures of ammonia in methane that are applied to several different ammonia measurement systems are described. The measurement systems are comprised of readily available commercial spectroscopic analysers that are specific to ammonia. These NH3 analysers are considered as a black box in terms of their operation, which is dependent on the instructions of the manufacturer. The document describes suitable calibration and measurement strategies to quantify ammonia in (bio)methane around and above the 10 mg m-3 (14 µmol mol-1) level and applies to analysis within absolute pressure ranges of 1 bar – 2 bar, temperatures of 0 °C – 40 °C and relative humidity <90 %.
References are also made to additional standards that are applied either to natural gas analysis or air quality measurements. In this document the matrix gas is always methane or biomethane and the measurand is the amount fraction NH3.
NOTE            1 bar = 0,1 MPa =105 Pa; 1 MPa = 1 N/mm2.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2613-2:2023(Main)
Analysis of natural gas - Silicon content of biomethane - Part 2: Determination of siloxane content by gas chromatography with ion mobility spectrometry (ISO 2613-2:2023)
SIST EN ISO 2613-2:2024

This document describes a gas chromatography – ion mobility spectroscopy (GC-IMS) method for the determination of the concentration of siloxanes in biomethane. The method is applicable to the following siloxanes:
—     hexamethyldisiloxane (L2);
—     octamethyltrisiloxane (L3);
—     decamethyltetrasiloxane (L4);
—     dodecamethylpentasiloxane (L5);
—     hexamethylcyclotrisiloxane (D3);
—     octamethylcyclotetrasiloxane (D4);
—     decamethylcyclopentasiloxane (D5);
—     dodecamethylcyclohexasiloxane (D6).
This document describes suitable calibration and measurement strategies to quantify siloxanes in (bio)methane around and above the 0,3 mg m-3 (14 µmol mol-1) level and applies to analyses within absolute pressure ranges of 1 bar – 2 bar, temperatures of 0 °C – 40 °C and relative humidity < 90 %.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2614:2023(Main)
Analysis of natural gas - Biomethane - Determination of terpenes' content by micro gas chromatography (ISO 2614:2023)
SIST EN ISO 2614:2024

This document specifies a micro gas chromatography method for the on-line or offline determination of the content of five terpenes in biomethane, namely:
—     alpha-pinene,
—     beta-pinene,
—     para-cymene,
—     limonene,
—     3-carene.
The method is specifically developed for these five compounds. Information about the compounds is given in Annex A.
The method is applicable to the determination of individual amount fractions of the five terpenes from 1 µmol/mol up to and including 10 µmol/mol. With minor modifications it can also be used for terpene amount fractions above 10 µmol/mol.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 2610:2023(Main)
Analysis of natural gas - Biomethane - Determination of amines content (ISO/TS 2610:2022)
SIST-TS CEN ISO/TS 2610:2023

This document specifies the determination of the concentration of alkanolamines in biomethane. The measurement method involves thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (TD-GC-MS/FID). The described method is specifically developed for the analysis of five amine compounds, namely:
— monoethanolamine (MEA);
— diglycolamine (DGA);
— diethanolamine (DEA);
— N-methyldiethanolamine (MDEA);
— piperazine (PZ).
Information about the compounds is given in Annex A.

  • Technical specification
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2613-1:2023(Main)
Analysis of natural gas - Silicon content of biomethane - Part 1: Determination of total silicon by atomic emission spectroscopy (AES) (ISO 2613-1:2023)
SIST EN ISO 2613-1:2023

This document is applicable to the measurement of the total silicon content in gaseous matrices such as biomethane and biogas. Silicon is present in a gas phase contained predominantly in siloxane compounds, trimethylsilane and trimethylsilanol. The analytical form of the silicon measured in liquid phase after conducted sampling and derivatization procedure is soluble hexafluorosilicate anion stable in slightly acidified media. Total silicon is expressed as a mass of silicon in the volume of the analysed gas.
This document is applicable to stated gaseous matrices with silicon concentrations up to 5 mg/m3, and it is prevalently intended for the biomethane matrices with Si mass concentration of 0,1 mg/m3 to 0,5 mg/m3.
With adaptation to ensure appropriate absorption efficiency, it can be used for higher concentrations. The detection limit of the method is estimated as 0,05 mg/m3 based on a gas sample volume of 0,020 m3. All compounds present in the gas phase are volatile at the absorption and derivatization temperature and gaseous organosilicon species are trapped in absorbance media and derivatized into analytical silicon that is measured by this method. The concentration of the silicon is measured in diluted derivatization media using atomic emission spectrometry upon atomisation/ionisation in microwave or inductively coupled plasma.
Unless specified otherwise, all volumes and concentrations refer to standard reference conditions (temperature, 273 K, and pressure, 101,325 kPa).
NOTE       When using appropriate dilution factors, the method can also be applied for silicon concentrations above 5 mg/m3.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10715:2022(Main)
Natural gas - Gas sampling (ISO 10715:2022)
SIST EN ISO 10715:2023

This document gives means for ensuring that samples of natural gas and natural gas substitutes that are conveyed into transmission and distribution grids are representative of the mass to which they are allocated.
NOTE      To ensure that a particular gas is taken into account in the standard, please see Annex A.
This document is applicable for sampling at sites and locations where interchangeability criteria, energy content and network entry conditions are measured and monitored and is particularly relevant at cross border and fiscal measurement stations. It serves as an important source for control applications in natural gas processing and the measurement of trace components.
This document is applicable to natural dry gas (single phase - typically gas transiting through natural gas pipelines) sampling only. On occasion a natural gas flow can have entrained liquid hydrocarbons. Attempting to sample a wet natural gas flow introduces the possibility of extra unspecified uncertainties in the resulting flow composition analysis. Sampling a wet gas (two or three phases) flow is outside the scope of this document.
This document does not apply to the safety issues associated with gas sampling.

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10101-3:2022(Main)
Natural gas - Determination of water by the Karl Fischer method - Part 3: Coulometric procedure (ISO 10101-3:2022)
SIST EN ISO 10101-3:2022

This document specifies a coulometric procedure for the determination of water content by the Karl Fischer method. The method is applicable to natural gas and other gases which do not react with Karl Fischer (KF) reagents.
It applies to water concentrations between 5 mg/m3 and 5 000 mg/m3. Volumes are expressed at temperature of 273,15 K (0 °C) and a pressure of 101,325 kPa (1 atm).

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day