Analysis of natural gas - Biomethane - Determination of VOCs by thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (ISO 2620:2024)

This document describes a method for sampling and analysis of volatile organic compounds (VOCs), including siloxanes, terpenes, organic sulfur compounds, in natural gas and biomethane matrices, using thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (TD-GC-FID/MS).

Analyse von Erdgas - Biomethan - Bestimmung von flüchtigen organischen Verbindungen durch thermische Desorptionsgaschromatographie mit Flammenionisations- und/oder Massenspektrometriedetektoren (TD GC FID/MS) (ISO 2620:2024)

Dieses Dokument beschreibt ein Verfahren zur Probenahme und Analyse von flüchtigen organischen Verbindungen (VOCs), einschließlich Siloxane, Terpene, organische Schwefelverbindungen, in Erdgas- und Biomethan-Matrices mit thermischer Desorptions-Gaschromatographie mit Flammenionisations- und/oder Massendetektoren (TD GC FID/MS).

Analyse du gaz naturel - Biométhane - Détermination des COV par chromatographie en phase gazeuse à désorption thermique avec détecteurs à ionisation de flamme et/ou spectrométrie de masse (ISO 2620:2024)

Le présent document décrit une méthode de prélèvement et d'analyse des composés organiques volatils (COV), y compris les siloxanes, les terpènes, les composés soufrés organiques, présents dans les matrices de gaz naturel et de biométhane, par chromatographie en phase gazeuse à désorption thermique avec détecteurs à ionisation de flamme et/ou spectrométrie de masse (TD-GC-FID/MS).

Analiza zemeljskega plina - Biometan - Določanje hlapnih ogljikovodikov (VOC) s plinsko kromatografijo s termično desorpcijo in s plamensko ionizacijskim in/ali masno selektivnim detektorjem (TD-GC-FID/MS) (ISO 2620:2024)

General Information

Status
Published
Publication Date
02-Apr-2024
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
03-Apr-2024
Due Date
28-Feb-2025
Completion Date
03-Apr-2024

Buy Standard

Standard
EN ISO 2620:2024
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2024
Analiza zemeljskega plina - Biometan - Določanje hlapnih ogljikovodikov (VOC) s
plinsko kromatografijo s termično desorpcijo in s plamensko ionizacijskim in/ali
masno selektivnim detektorjem (TD-GC-FID/MS) (ISO 2620:2024)
Analysis of natural gas - Biomethane - Determination of VOCs by thermal desorption gas
chromatography with flame ionization and/or mass spectrometry detectors (ISO
2620:2024)
Analyse von Erdgas - Biomethan - Bestimmung von flüchtigen organischen
Verbindungen durch thermische Desorptionsgaschromatographie mit
Flammenionisations- und/oder Massenspektrometriedetektoren (TD GC FID/MS) (ISO
2620:2024)
Analyse du gaz naturel - Biométhane - Détermination des COV par chromatographie en
phase gazeuse à désorption thermique avec détecteurs à ionisation de flamme et/ou
spectrométrie de masse (ISO 2620:2024)
Ta slovenski standard je istoveten z: EN ISO 2620:2024
ICS:
71.040.50 Fizikalnokemijske analitske Physicochemical methods of
metode analysis
75.060 Zemeljski plin Natural gas
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 2620
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2024
EUROPÄISCHE NORM
ICS 75.060
English Version
Analysis of natural gas - Biomethane - Determination of
VOCs by thermal desorption gas chromatography with
flame ionization and/or mass spectrometry detectors (ISO
2620:2024)
Analyse du gaz naturel - Biométhane - Détermination Analyse von Erdgas - Biomethan - Bestimmung von
des COV par chromatographie en phase gazeuse à flüchtigen organischen Verbindungen durch
désorption thermique avec détecteurs à ionisation de thermische Desorptionsgaschromatographie mit
flamme et/ou spectrométrie de masse (ISO 2620:2024) Flammenionisations- und/oder
Massenspektrometriedetektoren (TD GC FID/MS) (ISO
2620:2024)
This European Standard was approved by CEN on 1 April 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2620:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 2620:2024) has been prepared by Technical Committee ISO/TC 193 "Natural
gas" in collaboration with Technical Committee CEN/TC 408 “Natural gas and biomethane for use in
transport and biomethane for injection in the natural gas grid” the secretariat of which is held by
AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2024, and conflicting national standards shall
be withdrawn at the latest by October 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 2620:2024 has been approved by CEN as EN ISO 2620:2024 without any modification.

International
Standard
ISO 2620
First edition
Analysis of natural gas —
2024-03
Biomethane — Determination
of VOCs by thermal desorption
gas chromatography with
flame ionization and/or mass
spectrometry detectors
Analyse du gaz naturel — Biométhane — Détermination des
COV par chromatographie en phase gazeuse à désorption
thermique avec détecteurs à ionisation de flamme et/ou
spectrométrie de masse
Reference number
ISO 2620:2024(en) © ISO 2024
ISO 2620:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 2620:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents and materials . 1
5.1 Individual VOCs .1
5.2 Dilution solvent .2
5.3 Sorbents .2
6 Apparatus . 2
7 Preparation . 2
7.1 Field tube blanks.2
7.2 Solutions for liquid spiking .3
7.2.1 General .3
7.2.2 Solution containing approximately 0,2 mg/ml of each component .3
7.2.3 Solution containing approximately 0,04 mg/ml of each component .3
7.2.4 Solution containing approximately 0,01 mg/ml of each component .3
7.2.5 Standard tubes loaded with liquid spiking .3
8 Sampling . 3
9 Sample handling . 4
10 Procedure . 4
10.1 Desorption and analysis . .4
10.2 Quantification . . .6
10.3 Calculations .6
11 Quality assurance . 7
12 Test report . 7
Bibliography . 8

iii
ISO 2620:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the con
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.