EN ISO 18753:2005
(Main)Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pyknometer (ISO 18753:2004)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pyknometer (ISO 18753:2004)
ISO 18753:2004 specifies a method for determining the particle density of fine ceramic powders using liquid pyknometry.
Hochleistungskeramik - Bestimmung der absoluten Dichte keramischer Pulver mit einem Pyknometer (ISO 18753:2004)
In dieser Internationalen Norm ist ein Verfahren zur Bestimmung der absoluten Teilchendichte feinkera-mischer
Pulver mit einem Pyknometer festgelegt.
Céramiques techniques - Détermination de la masse volumique absolue des poudres céramiques à l'aide d'un pycnomètre (ISO 18753:2004)
L'ISO 18753:2004 spécifie une méthode de détermination par pycnométrie liquide de la masse volumique des particules de poudres céramiques.
Fina keramika (sodobna keramika, sodobna tehnična keramika) – Določanje absolutne gostote keramičnih praškov s piknometrom (ISO 18753:2004)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2006
)LQDNHUDPLND VRGREQDNHUDPLNDVRGREQDWHKQLþQDNHUDPLND ±'RORþDQMH
DEVROXWQHJRVWRWHNHUDPLþQLKSUDãNRYVSLNQRPHWURP ,62
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of
absolute density of ceramic powders by pyknometer (ISO 18753:2004)
Hochleistungskeramik - Bestimmung der absoluten Dichte keramischer Pulver mit einem
Pyknometer (ISO 18753:2004)
Céramiques techniques - Détermination de la masse volumique absolue des poudres
céramiques a l'aide d'un pycnometre (ISO 18753:2004)
Ta slovenski standard je istoveten z: EN ISO 18753:2005
ICS:
81.060.30
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 18753
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2005
ICS 81.060.30 Supersedes EN 725-7:1995
English Version
Fine ceramics (advanced ceramics, advanced technical
ceramics) - Determination of absolute density of ceramic
powders by pyknometer (ISO 18753:2004)
Céramiques techniques - Détermination de la masse Hochleistungskeramik - Bestimmung der absoluten Dichte
volumique absolue des poudres céramiques à l'aide d'un keramischer Pulver mit einem Pyknometer (ISO
pycnomètre (ISO 18753:2004) 18753:2004)
This European Standard was approved by CEN on 19 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18753:2005: E
worldwide for CEN national Members.
Foreword
The text of ISO 18753:2004 has been prepared by Technical Committee ISO/TC 206 “Fine ceramics” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 18753:2005 by
Technical Committee CEN/TC 184 “Advanced technical ceramics” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2006, and conflicting national standards shall be withdrawn at the
latest by April 2006.
This document supersedes EN 725-7:1995.
CEN/TC 184 has prepared EN 725 Advanced technical ceramics — Methods of test for ceramic powders in
twelve parts as follows:
Part 1: Determination of impurities in alumina
Part 2: Determination of impurities in barium titanate
Part 3: Determination of oxygen content of non-oxides by thermal extraction
Part 4: Determination of oxygen content of non-oxides by XRF analysis
Part 5: Determination of particle size distribution
Part 6: Determination of specific surface area
Part 7: Determination of absolute density
Part 8: Determination of tapped density
Part 9: Determination of untamped bulk density
Part 10: Determination of compaction properties
Part 11: Determination of the densification on natural sintering
Part 12: Chemical analysis of zirconia
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
Endorsement notice
The text of ISO 18753:2004 has been approved by CEN as EN ISO 18753:2005 without any modifications.
INTERNATIONAL ISO
STANDARD 18753
First edition
2004-08-15
Fine ceramics (advanced ceramics,
advanced technical ceramics) —
Determination of absolute density of
ceramic powders by pyknometer
Céramiques techniques — Détermination de la masse volumique
absolue des poudres céramiques à l'aide d'un pycnomètre
Reference number
ISO 18753:2004(E)
©
ISO 2004
ISO 18753:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
©
ii ISO 2004 – All rights reserved
ISO 18753:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 18753 was prepared by Technical Committee ISO/TC 206, Fine ceramics.
©
ISO 2004 – All rights reserved iii
.
iv
INTERNATIONAL STANDARD ISO 18753:2004(E)
Fine ceramics (advanced ceramics, advanced tech
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.