EN 13329:2016/prA1

Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods

This European Standard specifies characteristics, requirements and test methods for laminate floor coverings with a surface layer based on aminoplastic thermosetting resins as defined in 3.1 and 3.2. It also specifies requirements for marking and packaging.
It includes a classification system, based on EN ISO 10874, giving practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice.
Laminate floor coverings are considered for domestic and commercial levels of use, including domestic kitchens. This standard does not specify requirements relating to areas which are subjected to frequent wetting, such as bathrooms, laundry rooms or saunas.

Laminatböden - Elemente mit einer Deckschicht auf Basis aminoplastischer, wärmehärtbarer Harze - Spezifikationen, Anforderungen und Prüfverfahren

Revêtements de sol stratifiés - Éléments dont la surface est à base de résines aminoplastes thermodurcissables - Spécifications, exigences et méthodes d'essai

Laminatne talne obloge - Elementi z zunanjo plastjo na osnovi aminoplastičnih termostabilnih smol - Specifikacije, zahteve in preskusne metode

General Information

• Status: Not Published
• ICS: 97.150 - Floor coverings
• Technical Committee: CEN/TC 134 - Resilient and textile floor coverings
• Drafting Committee: CEN/TC 134/WG 9 - Laminate floor coverings
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 06-Apr-2017
• Due Date: 29-Oct-2017
• Completion Date: 06-Apr-2017
• Ref Project: SIST EN 13329:2016/oprA1:2017 - Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods

Relations

• Merged Into: EN 13329:2016+A1:2017 - Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
• Effective Date: 18-Jan-2023
• Amends: EN 13329:2016 - Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
• Effective Date: 29-Sep-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13329:2016/oprA1:2017
01-februar-2017
/DPLQDWQHWDOQHREORJH(OHPHQWL]]XQDQMRSODVWMRQDRVQRYLDPLQRSODVWLþQLK
WHUPRVWDELOQLKVPRO6SHFLILNDFLMH]DKWHYHLQSUHVNXVQHPHWRGH
Laminate floor coverings - Elements with a surface layer based on aminoplastic
thermosetting resins - Specifications, requirements and test methods
Laminatböden - Elemente mit einer Deckschicht auf Basis aminoplastischer,
wärmehärtbarer Harze - Spezifikationen, Anforderungen und Prüfverfahren
Revêtements de sol stratifiés - Éléments dont la surface est à base de résines
aminoplastes thermodurcissables - Spécifications, exigences et méthodes d'essai
Ta slovenski standard je istoveten z: EN 13329:2016/prA1
ICS:
97.150 Talne obloge Floor coverings
SIST EN 13329:2016/oprA1:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13329:2016/oprA1:2017

---------------------- Page: 2 ----------------------

SIST EN 13329:2016/oprA1:2017


DRAFT
EUROPEAN STANDARD
EN 13329:2016
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
January 2017
ICS 97.150
English Version

Laminate floor coverings - Elements with a surface layer
based on aminoplastic thermosetting resins -
Specifications, requirements and test methods
Revêtements de sol stratifiés - Éléments dont la surface Laminatböden - Elemente mit einer Deckschicht auf
est à base de résines aminoplastes thermodurcissables Basis aminoplastischer, wärmehärtbarer Harze -
- Spécifications, exigences et méthodes d'essai Spezifikationen, Anforderungen und Prüfverfahren
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 134.

This draft amendment A1, if approved, will modify the European Standard EN 13329:2016. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sw
...