iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 29053:1993

(Main)

Acoustics - Materials for acoustical applications - Determination of airflow resistance (ISO 9053:1991)

Acoustics - Materials for acoustical applications - Determination of airflow resistance (ISO 9053:1991)

The standard specifies two methods for the determination of the airflow resistance of porous materials for acoustical applications

Akustik - Materialien für akustische Anwendungen - Bestimmung des Strömungswiderstandes (ISO 9053:1991)

Acoustique - Matériaux pour applications acoustiques - Détermination de la résistance à l'écoulement de l'air (ISO 9053:1991)

La présente Norme internationale prescrit deux méthodes de détermination de la résistance à l'écoulement de l'air des matériaux poreux utilisés pour applications acoustiques. Elle s'applique à des éprouvettes découpées dans des matériaux poreux.
NOTE 1 Les publications qui traitent du comportement des matériaux à l'écoulement tant en régime laminaire que turbulent sont indiquées dans l'annexe A.

Akustika - Gradiva za uporabo v akustiki – Določevanje pretočnega upora zraka (ISO 9053:1991)

General Information

Status
Withdrawn
Publication Date
30-Mar-1993
Withdrawal Date
11-Dec-2018
ICS
17.140.01 - Acoustic measurements and noise abatement in general
Technical Committee
CEN/TC 126 - Acoustic properties of building products and of buildings
Drafting Committee
CEN/TC 126 - Acoustic properties of building products and of buildings
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
12-Dec-2018
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/103 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on thermal insulating products
Ref Project
SIST EN 29053:1999 - Acoustics - Materials for acoustical applications - Determination of airflow resistance (ISO 9053:1991)

Relations

Replaced By
EN ISO 9053-1:2018 - Acoustics - Determination of airflow resistance - Part 1: Static airflow method (ISO 9053-1:2018)
Effective Date
19-Dec-2018

Buy Standard

EN 29053:1999EN 29053:1999
PreviousNext
Standard
EN 29053:1999
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 29053:1999
01-november-1999
$NXVWLND*UDGLYD]DXSRUDERYDNXVWLNL±'RORþHYDQMHSUHWRþQHJDXSRUD]UDND
,62
Acoustics - Materials for acoustical applications - Determination of airflow resistance
(ISO 9053:1991)
Akustik - Materialien für akustische Anwendungen - Bestimmung des
Strömungswiderstandes (ISO 9053:1991)
Acoustique - Matériaux pour applications acoustiques - Détermination de la résistance a
l'écoulement de l'air (ISO 9053:1991)
Ta slovenski standard je istoveten z: EN 29053:1993
ICS:
17.140.01 $NXVWLþQDPHUMHQMDLQ Acoustic measurements and
EODåHQMHKUXSDQDVSORãQR noise abatement in general
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
SIST EN 29053:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 29053:1999

---------------------- Page: 2 ----------------------

SIST EN 29053:1999

---------------------- Page: 3 ----------------------

SIST EN 29053:1999

---------------------- Page: 4 ----------------------

SIST EN 29053:1999
IS0
INTERNATIONAL
STANDARD 9053
First edition
1991-07-01
Acoustics - Materials for acoustical
applications - Determination of airflow
resistance
Acoustique - Ma t&iaux pour applications acoustiques - D6termina tion
de la r&istance 2 I’koulement de /‘air
Reference number
IS0 9053: 199 1 (E)

---------------------- Page: 5 ----------------------

SIST EN 29053:1999
IS0 9053:1991 (E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. IS0 collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an lnter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard IS0 9053 was prepared by Technical Committee
ISO/TC 43, Acoustics.
Annex A of this International Standard is for information only.
0 is0 1991
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without
permission in writing from the publisher.
lnternationa I Organization for Standard ization
Case Postal e 56 l CH-121 1 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 6 ----------------------

SIST EN 29053:1999
IS0 9053:1991(E)
Introduction
The airflow resistance of porous materials indicates, in an indirect
manner, some of their structural properties. It may be used to establish
correlations between the structure of these materials and some of their
acoustical properties (for example, absorption, attenuation, etc.).
This International Standard is, therefore, useful for two purposes:
a) in relating some of the acoustical proper-ties of porous materials to
their struct ure an d their method of manufactu re;
b) in ensuring product quality (quality control).
. . .
III

---------------------- Page: 7 ----------------------

SIST EN 29053:1999
This page intentionally left blank

---------------------- Page: 8 ----------------------

SIST EN 29053:1999
__-~~~ -~-
IS0 9053:1991 (E)
INTERNATIONAL STANDARD
- Materials for acoustical applications -
Acoustics
Determination of airflow resistance
is the airflow resistance, in Pascal sec-
1 Scope
onds per cubic metre, of the test speci-
men;
This International Standard specifies two methods
for the determination of the airflow resistance of
A is the cross-sectional area, in square
porous materials for acoustical applications.
metres, of the test specimen perpen-
dicular to the direction of flow.
It is applicable to test specimens cut from products
of porous materials.
It is expressed in Pascal seconds per metre.
NOTE 1 Details of publications relating to flow behav-
2.3 airflow resistivity, Y: If the material is con-
iour under both iaminar and turbulent conditions are given
sidered as being homogeneous, that quantity de-
in annex A.
fined by
R
y=-S
2 Definitions
d
For the purposes of this International Standard, the
where
following definitions apply.
R is the specific airflow resistance, in
S
2.1 airflow resistance, R: A quantity defined by Pascal seconds per metre, of the test
specimen;
AP
/
R=T- d i
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 10534-2:2023(Main)
Acoustics - Determination of acoustic properties in impedance tubes - Part 2: Two-microphone technique for normal sound absorption coefficient and normal surface impedance (ISO 10534-2:2023)
SIST EN ISO 10534-2:2024

This test method covers the use of an impedance tube, two microphone locations and a frequency
analysis system for the determination of the sound absorption coefficient of sound absorbing materials
for normal incidence sound incidence. It can also be applied for the determination of the acoustical
surface impedance or surface admittance of sound absorbing materials. As an extension, it can also be
used to assess intrinsic properties of homogeneous acoustical materials such as their characteristic
impedance, characteristic wavenumber, dynamic mass density and dynamic bulk modulus.
The test method is similar to the test method specified in ISO 10534-1[1] in that it uses an impedance
tube with a sound source connected to one end and the test sample mounted in the tube at the other
end. However, the measurement technique is different. In this test method, plane waves are generated
in a tube by a sound source, and the decomposition of the interference field is achieved by the
measurement of acoustic pressures at two fixed locations using wall-mounted microphones or an intube
traversing microphone, and subsequent calculation of the complex acoustic transfer function and
quantities reported in the previous paragraph. The test method is intended to provide an alternative,
and generally much faster, measurement technique than that of ISO 10534-1[1].
Normal incidence absorption coefficients coming from impedance tube measurements are not
comparable with random incidence absorption coefficients measured in reverberation rooms according
to ISO 354[2]. The reverberation room method will (under ideal conditions) determine the sound
absorption coefficient for diffuse sound incidence. However, the reverberation room method requires
test specimens which are rather large. The impedance tube method is limited to studies at normal and
plane incidence and requires samples of the test object which are of the same size as the cross-section
of the impedance tube. For materials that are locally reacting only, diffuse incidence sound absorption
coefficients can be estimated from measurement results obtained by the impedance tube method (see
Annex E).
Through the whole document, a e+ jt time convention is used.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12999-1:2020(Main)
Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2020)
SIST EN ISO 12999-1:2021

This document specifies procedures for assessing the measurement uncertainty of sound insulation in building acoustics. It provides for
—     a detailed uncertainty assessment;
—     a determination of uncertainties by inter-laboratory tests;
—     an application of uncertainties.
Furthermore, typical uncertainties are given for quantities determined according to ISO 10140 (all parts), ISO 16283 (all parts) and ISO 717 (all parts).

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9053-2:2020(Main)
Acoustics - Determination of airflow resistance - Part 2: Alternating airflow method (ISO 9053-2:2020)
SIST EN ISO 9053-2:2020

This document specifies an alternating airflow method for the determination of the airflow resistance[5], [6] of porous materials for acoustical applications.
Determination of the airflow resistance based on static flow is described in ISO 9053‑1.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12999-2:2020(Main)
Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 2: Sound absorption (ISO 12999-2:2020)
SIST EN ISO 12999-2:2020

This document specifies how to calculate:
—     the uncertainty of sound absorption coefficients and equivalent sound absorption areas measured according to ISO 354;
—     the uncertainty of the practical and weighted sound absorption coefficients determined according to ISO 11654;
—     the uncertainty of the object sound absorption coefficient according to ISO 20189; and
—     the uncertainty of the single number rating determined according to EN 1793‑1.
Furthermore, the use of uncertainties in reporting measured or weighted sound absorption coefficients is explained.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9053-1:2018(Main)
Acoustics - Determination of airflow resistance - Part 1: Static airflow method (ISO 9053-1:2018)
SIST EN ISO 9053-1:2019

This document specifies the measurement of the determination of the static airflow resistance[1,2], in a laminar flow regime, of porous materials for acoustical applications.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16251-1:2014(Main)
Acoustics - Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up - Part 1: Heavyweight compact floor (ISO 16251-1:2014)
SIST EN ISO 16251-1:2014

ISO 16251-1:2014 specifies a laboratory measurement method to determine the improvement of impact sound insulation by a floor covering when laid on a standard concrete floor mock-up and excited by a standard tapping machine. The method is restricted to soft, flexible floor coverings, which transmit impact sound mainly "locally" into the floor, i.e. through the area close to the points of excitation, so that the size of the flooring specimen does not have an influence on the results. Examples of such floor coverings are carpets, PVC, and linoleum. These floor coverings correspond to ISO 10140‑1:2010, Annex H, category I.
The results only provide information about the noise radiated. A subjective classification of the quality of the floor coverings is not intended.
ISO 16251-1:2014 provides the measurement method. Product test codes can contain further requirements concerning the specimens, such as temperature range, the number of test specimens or special mounting conditions.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 354:2003(Main)
Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003)
SIST EN ISO 354:2004

ISO 354:2003 specifies a method of measuring the sound absorption coefficient of acoustical materials used as wall or ceiling treatments, or the equivalent sound absorption area of objects, such as furniture, persons or space absorbers, in a reverberation room. It is not intended to be used for measuring the absorption characteristics of weakly damped resonators.
The results obtained can be used for comparison purposes and for design calculation with respect to room acoustics and noise control.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10534-1:2001(Main)
Acoustics - Determination of sound absorption coefficient and impedance in impedances tubes - Part 1: Method using standing wave ratio (ISO 10534-1:1996)
SIST EN ISO 10534-1:2002

Specifies a method for the determination of the sound absorption coefficient, reflection factor, surface impedance or admittance of materials and objects. The values are determined by evaluation of the standing wave pattern of a plane wave in a tube, which is generated by the superposition of an incident sinusiodal plane wave with the plane wave reflected from the test object.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10534-2:2023(Main)
Acoustics - Determination of acoustic properties in impedance tubes - Part 2: Two-microphone technique for normal sound absorption coefficient and normal surface impedance (ISO 10534-2:2023)
SIST EN ISO 10534-2:2024

This test method covers the use of an impedance tube, two microphone locations and a frequency
analysis system for the determination of the sound absorption coefficient of sound absorbing materials
for normal incidence sound incidence. It can also be applied for the determination of the acoustical
surface impedance or surface admittance of sound absorbing materials. As an extension, it can also be
used to assess intrinsic properties of homogeneous acoustical materials such as their characteristic
impedance, characteristic wavenumber, dynamic mass density and dynamic bulk modulus.
The test method is similar to the test method specified in ISO 10534-1[1] in that it uses an impedance
tube with a sound source connected to one end and the test sample mounted in the tube at the other
end. However, the measurement technique is different. In this test method, plane waves are generated
in a tube by a sound source, and the decomposition of the interference field is achieved by the
measurement of acoustic pressures at two fixed locations using wall-mounted microphones or an intube
traversing microphone, and subsequent calculation of the complex acoustic transfer function and
quantities reported in the previous paragraph. The test method is intended to provide an alternative,
and generally much faster, measurement technique than that of ISO 10534-1[1].
Normal incidence absorption coefficients coming from impedance tube measurements are not
comparable with random incidence absorption coefficients measured in reverberation rooms according
to ISO 354[2]. The reverberation room method will (under ideal conditions) determine the sound
absorption coefficient for diffuse sound incidence. However, the reverberation room method requires
test specimens which are rather large. The impedance tube method is limited to studies at normal and
plane incidence and requires samples of the test object which are of the same size as the cross-section
of the impedance tube. For materials that are locally reacting only, diffuse incidence sound absorption
coefficients can be estimated from measurement results obtained by the impedance tube method (see
Annex E).
Through the whole document, a e+ jt time convention is used.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 26101-1:2022(Main)
Acoustics - Test methods for the qualification of the acoustic environment - Part 1: Qualification of free-field environments (ISO 26101-1:2021)
SIST EN ISO 26101-1:2022

This document specifies methodology for qualifying acoustic spaces as anechoic and hemi-anechoic spaces meeting the requirements of a free sound field.
This document specifies discrete-frequency and broad-band test methods for quantifying the performance of anechoic and hemi-anechoic spaces, defines the qualification procedure for an omni-directional sound source suitable for free-field qualification, gives details of how to present the results and describes uncertainties of measurement.
This document has been developed for qualifying anechoic and hemi-anechoic spaces for a variety of acoustical measurement purposes. It is expected that, over time, various standards and test codes will refer to this document in order to qualify an anechoic or hemi-anechoic space for a particular measurement. Annex D provides guidelines for the specification of test parameters and qualification criteria for referencing documents.
In the absence of specific requirements or criteria, Annex A provides qualification criteria and measurement requirements to qualify anechoic and hemi-anechoic spaces for general purpose acoustical measurements.
This document describes the divergence loss method for measuring the free sound field performance of an acoustic environment.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day