EN ISO 3376:2002

Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2002)

ISO 3376:2002 specifies a method for determining the tensile strength, elongation at a specified load and elongation at break of leather. It is applicable to all types of leather.

Leder - Physikalische und mechanische Prüfungen - Bestimmung der Zugfestigkeit und der prozentualen Dehnung (ISO 3376:2002)

Diese Internationale Norm legt ein Verfahren zur Bestimmung der Zugfestigkeit, der prozentualen Dehnung bei einer bestimmten Belastung und der Bruchdehnung fest. Das Verfahren ist für alle Leder anwendbar..

Cuir - Essais physiques et mécaniques - Détermination de la résistance à la traction et du pourcentage d'allongement (ISO 3376:2002)

L'ISO 3376:2002 spécifie une méthode de détermination de la résistance à la traction, de l'allongement sous une force spécifiée ou à la rupture du cuir. Elle est applicable à tous les types de cuir.

Usnje - Fizikalni in mehanski preskusi - Ugotavljanje raztržnosti in odstotka raztezka (ISO 3376:2002)

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-2002
• Withdrawal Date: 14-Dec-2011
• ICS: 59.140.30 - Leather and furs
• Technical Committee: CEN/TC 289 - Leather
• Drafting Committee: CEN/TC 289/WG 2 - Physical test methods
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Dec-2011
• Completion Date: 15-Dec-2011
• Ref Project: SIST EN ISO 3376:2003 - Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2002)

Relations

• Replaced By: EN ISO 3376:2011 - Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2011)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3376:2003
01-februar-2003
Usnje - Fizikalni in mehanski preskusi - Ugotavljanje raztržnosti in odstotka
raztezka (ISO 3376:2002)
Leather - Physical and mechanical tests - Determination of tensile strength and
percentage extension (ISO 3376:2002)
Leder - Physikalische und mechanische Prüfungen - Bestimmung der Zugfestigkeit und
der prozentualen Dehnung (ISO 3376:2002)
Cuir - Essais physiques et mécaniques - Détermination de la résistance a la traction et
du pourcentage d'allongement (ISO 3376:2002)
Ta slovenski standard je istoveten z: EN ISO 3376:2002
ICS:
59.140.30 Usnje in krzno Leather and furs
SIST EN ISO 3376:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3376:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 3376:2003
EUROPEAN STANDARD
EN ISO 3376
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2002
ICS 59.140.30
English version
Leather - Physical and mechanical tests - Determination of
tensile strength and percentage extension (ISO 3376:2002)
Cuir - Essais physiques et mécaniques - Détermination de Leder - Physikalische und mechanische Prüfungen -
la résistance à la traction et du pourcentage d'allongement Bestimmung der Zugfestigkeit und der prozentualen
(ISO 3376:2002) Dehnung (ISO 3376:2002)
This European Standard was approved by CEN on 9 September 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3376:2002 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3376:2003
EN ISO 3376:2002 (E)
CORRECTED  2003-08-27
Foreword
This document (EN ISO 3376:2002) has been prepared by Technical Committee CEN/TC 289
"Leather", the secretariat of which is held by UNI, in collaboration with the International Union of
Leather Technologists and Chemists Societies (IULTCS).
It is based on Method IUP 6 of the International Union of Leather Technologists and Chemists
Societies.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2003, and conflicting national
standards shall be withdrawn at the latest by June 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 3376:2002 has been approved by CEN as EN ISO 3376:2002 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 3376:2003
EN ISO 3376:2002 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 2418 2002 Leather - Chemical, physical EN ISO 2418 2002
and mechanical and fastness
tests - Sampling location
ISO 2419 2002 Leather - Physi
...