EN 14449:2005
(Main)Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
This European Standard covers the evaluation of conformity and the factory production control of
- EN ISO 12543-2: Laminated safety glass;
- EN ISO 12543-3: Laminated glass;
inclusive laminated (safety) glass with fire resistant properties.
For glass products with electrical wiring or connections for e.g. alarm or heating purposes, this standard covers only wiring subject for electrical potential difference to earth less than 50 V a.c. or less than 75 V d.c.
Glas im Bauwesen - Verbundglas und Verbund-Sicherheitsglas - Konformitätsbewertung/Produktnorm
Diese Europäische Norm umfasst die Konformitätsbewertung und die werkseigene Produktionskontrolle von
Verbundglas und Verbund-Sicherheitsglas zur Anwendung im Bauwesen.
ANMERKUNG 1 Dies beinhaltet ebenfalls Anforderungen, die Gegenstand gesetzlicher Bestimmungen sind.
ANMERKUNG 2 Für Glaserzeugnisse mit elektrischer Verkabelung oder Anschlüssen, wie z. B. Alarm- oder
Heizungsanwendungen, können andere Richtlinien, z. B. die Niederspannungsrichtlinie, gelten.
Verre dans la construction - Verre feuilleté et verre feuilleté de sécurité - Evaluation de la conformité
La présente Norme européenne couvre l'évaluation de la conformité et le contrôle de la production en usine pour
¾ EN ISO 12543-2 : Verre feuilleté de sécurité ;
¾ EN ISO 12543-3 : Verre feuilleté ;
y compris le verre (de sécurité) feuilleté présentant des caractéristiques de résistance au feu.
Pour les produits verriers équipés d'un câblage ou de branchements électriques pour des besoins d'alarme ou de chauffage par exemple, la présente norme couvre uniquement les éléments de câblage prévus pour une différence de potentiel électrique à la terre inférieure à 50 V c.a. ou inférieure à 75 V c.c.
Steklo v gradbeništvu – Lepljeno steklo in lepljeno varnostno steklo – Ovrednotenje skladnosti/standard za izdelek
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standardSteklo v gradbeništvu – Lepljeno steklo in lepljeno varnostno steklo – Ovrednotenje skladnosti/standard za izdelekVerre dans la construction - Verre feuilleté et verre feuilleté de sécurité - Evaluation de la conformitéGlas im Bauwesen - Verbundglas und Verbund-Sicherheitsglas - Konformitätsbewertung/ProduktnormTa slovenski standard je istoveten z:EN 14449:2005SIST EN 14449:2005en81.040.20ICS:SLOVENSKI
STANDARDSIST EN 14449:200501-september-2005
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14449May 2005ICS 81.040.20English versionGlass in building - Laminated glass and laminated safety glass -Evaluation of conformity/Product standardVerre dans la construction - Verre feuilleté et verre feuilletéde sécurité - Evaluation de la conformité/Norme de produitGlas im Bauwesen - Verbundglas und Verbund-Sicherheitsglas - Konformitätsbewertung/ProduktnormThis European Standard was approved by CEN on 3 March 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14449:2005: E
Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Requirements.6 4.1 Product description.6 4.2 Conformity with the definition of laminated glass and laminated safety glass.6 4.3 Determination of the characteristic’s performances.7 4.4 Durability.10 4.5 Dangerous substances.10 5 Evaluation of conformity.11 5.1 General.11 5.2 Initial type testing of the product (see 5.1, b).11 5.3 Factory production control (FPC) and inspection of samples in accordance with a prescribed test plan (see 5.1, a1 and 2).13 5.4 Initial inspection of factory and of factory production control (see 5.1, a3).13 5.5 Continuous surveillance and assessment of the factory production control (see 5.1, a3).14 6 Marking and/or labelling.15 6.1 General.15 6.2 Product marking.15 6.3 Product characteristics.15 6.4 “Characteristics/performance identification paper”.15 Annex A (normative)
Factory production control.16 Annex B (informative)
Tests for ensuring conformity.28 Annex C (informative)
Laminated safety glass: Mechanical resistance tests.33 Annex D (informative)
Criteria for deciding if a change within an assembly requires a new initial type test.36 Annex E (informative)
Provisions for voluntary involvement of third party(ies).38 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of EU Construction Products Directive.39 Bibliography.52
3 Foreword This European Standard (EN 14449:2005) has been prepared by Technical Committee CEN/TC 129 “Glass in building”, the secretariat of which is held by IBN/BIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2005, and conflicting national standards shall be withdrawn at the latest by January 2007. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. No existing European Standard is superseded. This European Standard stands alone. This European Standard contains other aspects of importance of trade. This European Standard includes a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Scope This European Standard covers the evaluation of conformity and the factory production control of laminated glass and laminated safety glass for use in buildings.
NOTE 1 This also includes requirements subject to regulation.
NOTE 2 For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 356, Glass in building - Security glazing - Testing and classification of resistance against manual attack EN 410, Glass in building - Determination of luminous and solar characteristics of glazing EN 572-1, Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties EN 673, Glass in building – Determination of thermal transmittance (U value) – Calculation method EN 1063, Glass in building - Security glazing - Testing and classification of resistance against bullet attack EN 1748-1-1, Glass in building - Special basic products - Borosilicate glasses - Part 1-1: Definition and general physical and mechanical properties EN 1748-2-1, Glass in building - Special basic products - Glass ceramics - Part 2-1: Definition and general physical and mechanical properties EN 1863-1, Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description EN 12150-1, Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description EN 12337-1, Glass in building - Chemically strengthened soda lime silicate glass – Part 1: Definition and description EN 12600, Glass in building - Pendulum test - Impact test method and classification for flat glass
EN 12758, Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties EN 12898, Glass in building - Determination of the emissivity EN 13024-1, Glass in building - Thermally toughened borosilicate safety glass - Part 1: Definition and description EN 13501-1, Fire classification of construction products and building elements - Part 1: Classification using test data from reaction to fire tests
5 EN 13501-2, Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services prEN 13501-5, Fire classification of construction products and building elements - Part 5: Classification using test data from external fire exposure to roof tests EN 13541, Glass in building - Security glazing - Testing and classification of resistance against explosion pressure EN 14178-1, Glass in building – Basic alkaline earth silicate glass products - Part 1: Float glass prEN 14179-1, Glass in building - Heat soaked thermally toughened soda lime silicate safety glass – Part 1: Definition and description prEN 14321-1, Glass in building – Thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description EN ISO 12543-1:1998, Glass in building – Laminated glass and laminated safety glass
- Part 1: Definitions and description of component parts (ISO 12543-1:1998) EN ISO 12543-2:1998, Glass in building – Laminated glass and laminated safety glass
- Part 2: Laminated safety glass (ISO 12543-2:1998) EN ISO 12543-3:1998, Glass in building – Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:1998) EN ISO 12543-4:1998, Glass in building – Laminated glass and laminated safety glass
- Part 4: Test methods for durability (ISO 12543-4:1998) EN ISO 12543-5:1998, Glass in building – Laminated glass and laminated safety glass
- Part 5: Dimensions and edge finishing (ISO 12543-5:1998) EN ISO 12543-6:1998, Glass in building – Laminated glass and laminated safety glass
- Part 6: Appearance (ISO 12543-6:1998) 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN ISO 12543:1998 Parts 1, 2, 3, 4, 5 and 6 and the following apply. 3.1 initial type testing determination of the performance of a product (characteristic, durability), on the basis of either actual tests or other procedures (such as conventional, standardised, tabulated or general accepted values, standardised or recognised calculation methods, test reports when made available, …), in accordance with this European Standard that demonstrates compliance with this European Standard
3.2 test report document that covers the results of tests undertaken on a representative sample of the product from production or on a prototype design of the product
3.3 product description document that details the relevant parameters, e.g. process conditions, structure, etc., for defining a product that complies with the standard. It includes specific reference(s) to characteristics that are modified by the production process 3.4 significant change variation in performance beyond the permitted tolerance for the characteristic
Disclosure of the product description shall be at the discretion of the laminated/laminated safety glass manufacturer or his agent except in the case of regulatory requirements. The description shall contain at least a normative part. The description may also contain an informative part, when the manufacturer foresees further development of the product. The normative part of the description shall contain the following minimum information: • A reference to EN ISO 12543 Parts 1 to 6 and all other standards with which the manufacturer claims compliance; • Component parts: • Glass types and thicknesses (see 4.3.1.2), • Plastics glazing sheet materials types and thicknesses,
• Interlayer types and thicknesses; • The order of stacking of the components; • Lamination process, e.g. folio, cast-in-place, etc.; • Coatings if present and their position relative to an interlayer. The interlayers may be listed either in full, i.e. chemical composition, or by a manufacturer's code. The definition of product families shall be consistent with the normative part of the product description. The substitution of materials and/or components shall maintain the conformity with the product description. The substituting materials and/or components can be added to the product family and also the product description when compliance has been demonstrated. 4.2 C
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.