EN ISO 15015:2007

Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2007)

ISO 15015:2007 specifies the requirements and test methods for solid flat extruded sheets of impact-modified acrylonitrile-styrene copolymer materials: acrylonitrile-butadiene-styrene (ABS), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) (commonly known as AES) and acrylonitrile-styrene-acrylate (ASA), without fillers or reinforcing materials. The standard also applies to ABS, AEPDS and ASA sheet in rolled form. It applies only to thicknesses from 0,25 mm to 20,0 mm.

Kunststoffe - Extrudierte Tafeln aus schlagzäh-modifizierten Acrylnitril/Styrol-Copolymeren (ABS, AEPDS und ASA) - Anforderungen und Prüfverfahren (ISO 15015:2007)

Diese Internationale Norm legt die Anforderungen und Prüfmethoden für massive ebene extrudierte Tafeln aus schlagzäh-modifiziertem Acrylnitril-Styrol-Copolymerwerkstoffen fest: Acrylnitril-Butadien-Styrol (ABS), Acrylnitril-(Ethylen-Propylen-Dien)-Styrol (AEPDS, am Markt auch bekannt als AES) und Acrylnitril-Styrol-Acrylester (ASA), ohne Füll- und Verstärkungsstoffe. Sie gilt darüber hinaus für gerollte ABS-, AEPDS- und ASA-Tafeln. Diese Internationale Norm gilt nur für Tafeldicken von 0,25 mm bis 20,0 mm.

Plastiques - Plaques extrudées en copolymères d'acrylonitrile-styrène modifiés choc (ABS, AEPDS ou ASA) - Exigences et méthodes d'essai (ISO 15015:2007)

L'ISO 15015:2007 sp�cifie les exigences et les m�thodes d'essai pour les plaques extrud�es compactes et planes, en copolym�res d'acrylonitrile-styr�ne modifi�s choc: acrylonitrile-butadi�ne-styr�ne (ABS), acrylonitrile-(�thyl�ne-propyl�ne-di�ne)-styr�ne (AEPDS ou appel� AES sur le march�) et d'acrylonitrile-styr�ne-acrylate (ASA), sans charges ou renforts. L'ISO 15015:2007 s'applique �galement aux plaques en ABS, AEPDS ou ASA sous forme de rouleaux. Elle s'applique uniquement aux plaques de 0,25 mm � 20,0 mm d'�paisseur.

Polimerni materiali - Ekstrudirane plošče iz modificiranih akrilonitril-stirenskih kopolimerov (ABS, AEPDS in ASA), odpornih proti udarcem - Zahteve in preskusne metode (ISO 15015:2007)

General Information

• Status: Withdrawn
• Publication Date: 30-Sep-2007
• Withdrawal Date: 31-Mar-2011
• ICS: 83.140.10 - Films and sheets
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249/WG 6 - Thermoplastics films, foils and sheets
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Apr-2011
• Completion Date: 01-Apr-2011
• Ref Project: SIST EN ISO 15015:2008 - Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2007)

Relations

• Replaced By: EN ISO 15015:2011 - Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15015:2008
01-februar-2008
3ROLPHUQLPDWHULDOL(NVWUXGLUDQHSORãþHL]PRGLILFLUDQLKDNULORQLWULOVWLUHQVNLK
NRSROLPHURY$%6$(3'6LQ$6$RGSRUQLKSURWLXGDUFHP=DKWHYHLQ
SUHVNXVQHPHWRGH,62
Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS,
AEPDS and ASA) - Requirements and test methods (ISO 15015:2007)
Kunststoffe - Extrudierte Tafeln aus schlagzäh-modifizierten Acrylnitril/Styrol-
Copolymeren (ABS, AEPDS oder ASA) - Anforderungen und Prüfverfahren (ISO
15015:2007)
Plastiques - Plaques extrudées en copolymeres d'acrylonitrile-styrene modifiés choc
(ABS, AEPDS ou ASA) - Exigences et méthodes d'essai (ISO 15015:2007)
Ta slovenski standard je istoveten z: EN ISO 15015:2007
ICS:
83.140.10
SIST EN ISO 15015:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 15015
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2007
ICS 83.140.10

English Version
Plastics - Extruded sheets of impact-modified acrylonitrile-
styrene copolymers (ABS, AEPDS and ASA) - Requirements
and test methods (ISO 15015:2007)
Plastiques - Plaques extrudées en copolymères Kunststoffe - Extrudierte Tafeln aus schlagzäh-
d'acrylonitrile-styrène modifiés choc (ABS, AEPDS ou ASA) modifizierten Acrylnitril/Styrol-Copolymeren (ABS, AEPDS
- Exigences et méthodes d'essai (ISO 15015:2007) oder ASA) - Anforderungen und Prüfverfahren (ISO
15015:2007)
This European Standard was approved by CEN on 13 September 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15015:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 15015:2007 (E)
Contents Page
Foreword.3

2

---------------------- Page: 3 ----------------------

EN ISO 15015:2007 (E)
Foreword
This document (EN ISO 15015:2007) has been prepared by Technical Committee ISO/TC 61 "Plastics" in
collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2008, and conflicting national standards shall be withdrawn at the
latest by April 2008.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 15015:2007 has been approved by CEN as a EN ISO 15015:2007 without any modification.

3

---------------------- Page: 4 ----------------------

INTERNATIONAL ISO
STANDARD 15015
First edition
2007-10-01

Plastics — Extruded sheets of impact-
modified acrylonitrile-styrene copolymers
(ABS, AEPDS and ASA) — Requirements
and test methods
Plastiques — Plaques extrudées en copolymères d'acrylonitrile-styrène
modifiés choc (ABS, AEPDS ou ASA) — Exigences et méthodes
d'essai




Reference number
ISO 15015:2007(E)
©
ISO 2007

---------------------- Page: 5 ----------------------

ISO 15015:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed
...